Best Fleor Electric Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for electric guitar bass pickguard DIY. Enough for two Strat, Tele, J Bass or one P Bass pickguard custom

Plastic made, 2.0-2.2mm thickness, easy to cut

Size: 435*290*2.2mm (17*12 inch)

Material: Plastic, not Metal

The pickguard has plastic protective films on it

One humbucker and on pot hole for most Fender Delonge Strats

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

11 screw holes in the side of pickguard, 3 pickup holes (humbucker - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Compatible with American strat style guitars (can also work on 11 holes Mexico strats).

Made to current 11 holes, please refer to the size picture before buying this item.

3-Ply electric guitar pickguard, SSS single coil configuration.

Made of plastic, copper, and magnet, black white zebra color, looks great.If you don't like the sticker on the surface, you can tear it off, and underneath is a straight white pickguard, which is beautiful.

Prevents scratches, a good replacement for your guitar.be able to get any sounds want out of this pickguard (almost) without even touching the controls on the amp.it is a great plug and play setup to really open up theing of any midrange guitar.

1 single-coil pickup, 2 dual rail humbucker pickups, 5-ways switch, Two tone switch,Three knob potentiometer.

The pickguard fits Mexican/American Standard Fender Strats, not other types of strats. (Please verify the pickguard dimensions when you order the item)

Vintage voiced' single coil pickups; Sweet and round vintage tone sound fantastic ; Ceramic magnet with 250K pots and 5 way switch

Classic Staggered Polepiece; Pickups have bright spanky articulate single coil sound; Pickups Resistance (approx.): Neck 5.75K; Middle 5.75K; Bridge 6.4K

This pickguard fit USA/Mexican Fender standard telecaster humbucker pickguard HH replacement, please check the dimension before you buying this tele pickguard humbucker.

There are 8 screw holes in the side of pickguard, humbucker hole size: 1.50 x 2.78 inch / 38 x 70.5mm.

Material: 3Ply constructions made of quality PVC plastic material. Color: black / white / black.

Protect your guitar from scratched also a good decoration for your guitar; Before you use it, you should remove the surface film of guitar pick guard and then your pick guard will seems glamour

3 Shapes of guitar pickguard can meet your different preferences

Made of PVC material, good replaces for acoustic guitar pickguard

Material: PVC Plastic

Dimenison: about 25cm(length) * 20cm(width) * 0.7mm(thickness)

The sheet has plastic protective film at the top and Self-Adhesive on the back

Please check the dimension before buying this pickguard, it fits Gibson Les Paul pickguard replacement, not Epiphone les paul guitar part.

1 Ply construction made of quality acrylic material- golden mirror.

There is an original protective film on the surface of pickguard, anti-scratch to protect the guitar; Excellent product process ensure the edge of the smooth and structured.

Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice.

Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

Fits Fender US/Mexico Made Standard Stratocaster Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.

Pickguard: 11 mounting screw holes, SSS pickup rountine. 3ply Abalone Pearl/ white/Black PVC material,0.09 inch (2.2mm)thickness

Backplate: 6 Holes. 4ply Abalone Pearl/Black/white/Black PVC material,0.09 inch (2.3MM)thickness.

Dopro three mounting-screw or two mounting-screw round corner holes for humbucking bridge pickup; Fits most American Standard, Hot Rod, American Deluxe, Lonestar, Classic Series '70s Strat HSS models. Some modification may be needed for other models of Strats

Pickguard holes may vary due to different country of origin or manufactured date, please double verify your screw-hole pattern according to our dimension photo to ensure the pickguard will fit your guitar.

Made of plastic; Each pickguard has two layers of plastic films which should be peeled off after installing

🎵 【Updated SSH Configuration】pre-loaded single coil pups for neck and middle position, bridge position with humbucker pickup, all with alnico v magnets bar and fully wax potted, with upgraded clear bobbins, an exact replica of the original Alnico V stratocaster pickups

🎵 【Great Sound】the humbucker bridge pickup is clear and rich in tone, when you add gain or distortion, it's not muddy sounding but has that crunch you expect for blues, country, and rock. The single coils with high gain and distortion are great

🎵 【Supper Easy to Install】only take minutes to solder 3 wires: 2 red pre-tinned wires are for the ground on input jack and spring claw, the white wire for the output hot of jack, or solder other way as you like to have desired sound

This pickguard fit Fender left handed Telecaster guitar part. If you have other types of Tele guitar, you may need a little modification for line up.

There are 8 screw holes in the side of pickguard and 2 screw holes fit neck pickup.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: black pearloid / black / white / black.

Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice.

Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: tawny stripe / white / black / white.

Fits Fender Style US/Mexico Style Standard Stratocaster Style Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.

Pickguard: 11 Holes, SSS Style. 4Ply Light Blue Pearl/White/Black/White, Pearl Plate and PVC Material

Back Plate: 6 Holes, 0.092 inch thickness. 4Ply Light Blue Pearl/White/Black/White, Pearl Plate and PVC Material

1 volume and 2 tome control knobs

3ply Black SSH pickguard

Perfect pickguard part replacement for ST electric guitar.

This pickguard fits American/Mexican Standard Fender Telecaster modern style guitar part, not Squier or any other Tele made in Asian country. If you have other types of Tele guitar, you may need a little modification for line up.

There are 8 screw holes in the side of pickguard and 2 screw holes for neck pickup.

Made of 1Ply Aluminum material, 1.5mm thickness. Color: chrome color.

PVC Flower Printing Colorful Guitar Pickguard Scratch Plate for 40 Inch 41 Inch Acoustic Guitars.

Ideal DIY guitar parts and replacement accessories for guitar lovers, learners or music bands.

Fit for 40 41 acoustic guitars. With green flower printing, also a good decor for your guitar.

This pickguard fit Fender 69 telecaster thinline re-issue guitar part, please check the dimension before buying this pickguard.

There are 12 hole standard mounting pattern with counter-sunk mounting screw holes.2 control pot holes pre-drilled in Standard positions.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream.

This pickguard fit Fender 69 telecaster thinline re-issue guitar part, please check the dimension before buying this pickguard.

There are 12 hole standard mounting pattern with counter-sunk mounting screw holes.2 control pot holes pre-drilled in Standard positions.

Material: 3Ply constructions made of quality PVC plastic material. Color: cream / black / cream.

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

CHECK BEFORE BUYING - This pickguard fit USA/Mexican Fender standard telecaster mini humbucker pickguard replacement, please check the dimension before you buying this pickguard.

PICKGUARD STYLE - There are 8 screw holes in the side of pickguard, Pickup hole size 1.12 x 2.70 inch / 28.5 x 68.5mm

PICKGUARD MATERIAL - 4 Ply constructions made of quality celluloid and PVC plastic material- brown & red tortoise shell.

Prewired loaded strat pickguard set fit American/Mexican made Fender standard stratocaster modern style guitar part.

Pickguard: Made of 3ply PVC material(black/white/black),11 screw hole in the side of pickguard, 3 single coil pickup holes.

Pickup: Vintage staggered Alnico 5 pickups,plastic bobbin and ABS conductor lead wire. Resistance:5K-6K (N/M); 6-7K (B)Pole Spacing: 50/50/52mm (N/M/B).

🎵 Nice for USA/Mexican Made Standard Stratocaster Modern Style Guitar.

🎵 Style: 11 screw holes in the side of pickguard and 3 pickup holes.

🎵 There is a pure aluminum foil shield on the backside for better shielding property and anti-interference.