Best Bass Classical Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for pickguard bass DIY custom;Enough material for 2 Tele or 2 Strat or Jazz Bass, one P-Bass of your own design and choice

3Ply Black/White/Black PVC material,0.09 inch thickness

Size:12 x17 inch (290x435mm)

Tex-mex pickups

Polysol-coated magnet wire

Staggered pole pieces for balanced output

You can use these blank material sheets to customize any pickguards or covers by yourself.

Dimension is about 11"x17" (29x43cm); Sheet is made of plastic,it has plastic protective films which can be peeled off

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied different thickness)

Fits 40" 41" Size guitars, Easy Installation, Plastic standard shaped, With self-adhesive tape on the back and uncover it to stick on the guitar

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar

Thin protective film on the front surface of the pickguard, peel off after installation

Style Design Clear Glossy Surface Pickguard

Scratch Resistant Coating, Anti Dust, Anti Fingerprint

High Quality Film and Made in South Korea.

Protect your guitar from scratched also a good decoration for your guitar; Before you use it, you should remove the surface film of guitar pick guard and then your pick guard will seems glamour

3 Shapes of guitar pickguard can meet your different preferences

Made of PVC material, good replaces for acoustic guitar pickguard

Fits most martin right handed models except OM18V, 3M glue self stick.

2mm thickness, consists of celluloid and high-quality crystal epoxy resin. beveled edge.

Flexible surface, compare with the traditional hardness surface pickguard, It very hard to be scratched. This means although used for a long time, it will still be in good condition.

Package includes: 8PCS Different Style Guitar Guard Plates

Material: PP

Capacity: Shown as picture 2

Guitar Pickguard Self-adhesive Anti-Scratch Water drop Shape Guard Plate Guard Sticker Guitar Pick for Replacement Acoustic Guitar.

With self-adhesive tape on the back and uncover it to stick on the guitar, easy to install.

Brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar.

Material: PVC Plastic

Dimenison: about 25cm(length) * 20cm(width) * 0.7mm(thickness)

The sheet has plastic protective film at the top and Self-Adhesive on the back

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Use this blank pickguard material sheet to cut your own acoustic pickguards.

Dimenison: about 7.87''(length) x 6.69''(width) x 0.03''(thickness)/20cm x 17cm x 0.07cm.

Material: PVC plastic. Color: Black. Thin plastic protective film at the top, peel off after installation.

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard,without truss rod notch. No holes for thumb rest or pickup cover.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation. PURE aluminum foil shield on the backside, better shielding property and anti-interference.

Genuine Herco guitar accessory

Self adhering plastic pickguard

Color: Clear

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard, with truss rod notch.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

Basic Design Clear Matte Surface

Scratch Resistant Coating, Anti Dust, Anti Fingerprint

High Quality Film and Made in South Korea

Package Content: You will receive 100 pcs guitar/bass pickguard screws in two colors, 50 in light black and 50 in bright silver, packed in 2 transparent boxes, easy to store. Sufficient quantity to meet your needs.

Suitable Size: The size of the guitar screw is about 12mm/0.5inch in total length, and the thread is measured about 3mm/0.1inch in diameter.

Premium Material: These pickguard screws are made of high-quality high quality iron, sturdy and durable, can be drilled into the guard plate easily. Besides, the plating surface can help prevent oxidation.

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not USA Deluxe Jazz Bass, or Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Pickguard is made of PVC Plastic and top layer is made of Celluloid material

Fits for original Music Man classic 4 string StingRay Bass Guitar, not for other types of basses

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

【DIMENSION】7”x3.9”(18cm x 10cm). One package includes 1 pcs guitar pick guard.

【APPLICATION】This pick guards is transparent and fit for 40” and 41” acoustic guitar.

【EASY USE】Compared with glue sticking process, this pick guard is designed with self-adhesive process, which makes it easily removed and attached.

This pickguard fits most(not all) Modern-Style American Standard series 4 string Precision Bass models,you may need a little modification if you use other model basses.

Pickguard holes may vary due to different country of origin or manufactured date, please double verify your screw-hole pattern according to our dimension photo to ensure the pickguard will fit your bass

High quality one ply Aluminum Anodized pickguard (not plastic) Thickness: 1.5mm (+/- 0.1mm error)

Solid Rosewood Material. Colored Plastic or Wood Veneer Inlay Pattern.Also a special decoration for your guitar.

With tape at the backside, easy to stick onto your guitar.Thin protective film on the front surface of the pickguard, peel off after installation.

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar.

With thin protective film on the surface, protect your guitar surface from scratches of picks and nail

Protect your guitar and also a good decoration for your guitar

Brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar.

Tortoise pickguard with historically accurate hummingbird and foliage printed overlay

Adhesive backing for quick installation

Compatible with and Epiphone and Gibson Hummingbird guitar

PVC MATERIAL: This is a professional acoustic guitar pick guard, made of qualified PVC, it is solid, firm and durable to use, ensures a long time service.

PVC MATERIAL: This is a professional acoustic guitar pick guard, made of qualified PVC, it is solid, firm and durable to use, ensures a long time service.

SELF-ADHESIVE PASTE: This is a pick guard with adhesive backing for easy installation and rip off, very convenient to use.

PVC MATERIAL: This is a professional acoustic guitar pick guard, made of qualified PVC, it is solid, firm and durable to use, ensures a long time service.

PVC MATERIAL: This is a professional acoustic guitar pick guard, made of qualified PVC, it is solid, firm and durable to use, ensures a long time service.

SELF-ADHESIVE PASTE: This is a pick guard with adhesive backing for easy installation and rip off, very convenient to use.

Universal Folk Acoustic Guitar Pickguard Self-adhesive Pick Guard Sticker for Acoustic Guitar Parts

It is also a good decoration for your guitar.With thin protective film on the surface, protect your guitar surface from scratches of picks and nails.

Made of high grade material, durable in use.

Pickguard is made of PVC Plastic and top layer is made of Celluloid material

Fits for original Music Man classic 4 string StingRay Bass Guitar, not for other types of basses

Thickness is about 2.2mm (+/- 0.13mm error, because different bulks materials might be varied a little different thickness)

Made of high grade material, durable in use.

With Self-adhesive tape on the back and uncover it to stick on the guitar, easy to install.

It is also a good decoration for your guitar.