Best Meccanixity Classical Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for pickguard bass DIY custom;Enough material for 2 Tele or 2 Strat or Jazz Bass, one P-Bass of your own design and choice

3Ply Black/White/Black PVC material,0.09 inch thickness

Size:12 x17 inch (290x435mm)

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic, it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Fits American Precision Bass, American Standard and Mexico Standard models (after 1970s). Will not fit Squier, 5-string Precision Bass

13 mounting screw holes ,without truss rod notch. No holes for thumb rest or pickup cover.

4ply White Pearl/White/Black/White PVC material, 0.09 inch (2.2mm) thickness

Tex-mex pickups

Polysol-coated magnet wire

Staggered pole pieces for balanced output

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 3Ply constructions made of quality PVC plastic material. Color: black / white / black.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard,without truss rod notch. No holes for thumb rest or pickup cover.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation. PURE aluminum foil shield on the backside, better shielding property and anti-interference.

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard, with truss rod notch.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not USA Deluxe Jazz Bass, or Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

The Package Length of the Product is 25.4 centimeters

The Package Width of the Product is 22.86 centimeters

The Package Height of the Product is 0.508 centimeters