Best Huatool in 2026

Product Name: 2.2mm Round head Acoustic Guitar Nickel silver Fret Wires

Material: HUATOOL acoustic guitar fret wires are made of 18% nickel, 18% zinc, 64% copper proportion matching.high quality tone

Guitar Fillet: The chamfer has been polished, so chamfering and polishing are no longer required, and can be used after installation. It can be installed with simple tools, Perfect for guitar repair，and can also be used to make new guitars. Scope of application: It is applicable to acoustic guitar, which can be bound or unbound

Material: HUATOOL Electric Guitar Fret Wires are made of high-quality stainless 304Cu steel. It has the characteristics of beautiful sound, solid quality, wear resistance, and durability.After heat treatment, it becomes soft and suitable for installation, and the density and wear resistance remain unchanged

Size Specs: A: Crown Width: 2.4mm(0.095 inch); B: Crown Height: 1.2mm (0.047 inch); C: Fret Height: 2.9mm(0.114 inch); D: Tang Height: 1.7mm(0.067 inch); E: Tang Width: 0.58mm(0.02 inch); F: Stud Width: 1mm(0.039 inch).9.5inch Rradian，Suitable for：9.5-16 inch radius guitar fingerboard (common for Electric Guitar)

Size: Pre-cut into 24pcs,0F-12F length data (approx.)44.8 46.1 47.19 47.93 48.98 49.16 50.59 51.40 52.05 52.91 53.41 54.09 54.58 55.13 55.95 56.31 56.57 57.12 57.52 57.59 58.14 58.42 58.63 59.25

Product Name:Classical Guitar Fret Wires 2.0mm cut 20pcs

Material: HUATOOL acoustic guitar fret wires are made of 18% nickel, 18% zinc, 64% copper proportion matching，high quality tone

Size: Thickness2.0mm , 20pic,ength data of 1f-20f (approximate): 53.56mm 54.04mm 55.10mm 56.10mm 57.04mm 58.05mm 58.13mm 59.13mm 60.09mm 60.13mm 60.16mm 61.11mm 61.21mm 61.26mm 62.01mm 62.03mm 63.01mm 63.56mm 64.09mm 64.59mm

High Quality Material: This fret wire nipper is made of high-quality stainless steel and rubber materials, and is fine, durable, strong and practical. You can use it safely for a long time. It is a good tool for pulling or cutting guitar wires, and an ideal gift for DIY lovers and guitar lovers

Fine Design: The jaw is precisely ground, the end milling cutter is correctly aligned, and the cutting edge contour is very symmetrical. This makes it possible to cut accurately at a position very close to the fretboard. Meanwhile, the smooth head can protect the fret board and avoid scratching it during use

Comfort & Portability: The anti-skid handle is ergonomically designed and comfortable to handle, which is very suitable for grasping. It is very easy to operate and can save a lot of time for your guitar making and repairing. The length is 6.3 inches (160 mm). It is small and light, easy to carry and use

Name: Instrument panel repaired stainless steel magnet handle

Material: stainless steel handle and Nd-Fe-B Magnet

Product use: 1. You can stick metal tools on the tool wall to absorb you, or stick them on the vise clamp to continue to absorb small tool accessories screws, etc. 2. Patch the cracks in your panel. 3. It can be used to change the magnetic pole of the pickup coil. 4. Use a small piece of sandpaper to polish any burrs inside the panel.

High Quality Material: The guitar fret wire is made of high quality stainless steel. It has the characteristics of beautiful sound quality, stable quality, wear resistance and durability. Fine processing technology is adopted to ensure smooth crown surface and edge without damaging fingerboard and strings

Perfect Replacement: This stainless steel guitar fret wire can be used as a replacement part of the guitar. It has a strong metal texture and becomes soft after heat treatment. It is suitable for installation and disassembly, but its density and wear resistance remain unchanged. It is very suitable for guitar production or maintenance

Size Specs: B: Crown Width: 2.4mm(0.094 inch); E: Crown Height: 1.2mm (0.047 inch); A: Fret Height: 2.9mm(0.114 inch); D: Tang Width: 0.6mm(0.024 inch). Each fret is slightly curved and the length is 260mm (10.24 inch) long, 10pcs/set, totally 260cm (8.5 Feet) long, enough for any standard guitar. You can cut it according to your own needs

Huatool Ebony Guitar Bridge Pins for Acoustic Guitar Inlaid Abalone shell Dot Guitar Replacement Endpins 6pcs Slotted

Huatool Ebony Guitar Bridge Pins for Acoustic Guitar Inlaid Abalone shell Dot Guitar Replacement Endpins 6pcs Slotted

UNDERSTATED YET LUXURIOUS DESIGN - The color of pure ebony forms the guitar bridge pins in a classic black vintage style. And each pin is inlaid with a delicate abalone shell dot and a brass circle on the top, Which makes it shiny, stylish, and luxurious. If you are trying to look for some high-end vintage-style guitar bridge pins, these ebony pins are just here for you.

ITEM: Bakelite Guitar Fret File

Size：smooth file plane

Usage：It is more convenient to polish the ege of fret wires ，make fret wires smooth

【High Quality Materials】 The bone nuts and saddles for acoustic guitar are made of real bones. Its density is very high and its porosity is very low, so it can transmit vibration well, thus producing excellent tone and clarity. Different from the dull sound produced by plastic nuts and saddles, its sound is more melodious and mellow, making your performance more pleasant

【Size & Set】 This bone nut and saddle comes in two sets, including two nuts and two saddles. Its nut size is 43*6*9mm, which is consistent. Saddles are available in three sizes: 72*3*9mm, 74*3*9mm, and 76*3*9mm. Don't worry if you accidentally damage it while using it. This suit contains enough products for you to use to get the results you want

【Sturdy & Durable】This nut and saddle is made of 100% high density real cow bone, it is very tough and durable. And cow bones are the traditional choice for making saddles and nuts on quality instruments and are very popular. You can use it with confidence.

【High Quality Materials】 The bone nuts and saddles for acoustic guitar are made of real bones. Its density is very high and its porosity is very low, so it can transmit vibration well, thus producing excellent tone and clarity. Different from the dull sound produced by plastic nuts and saddles, its sound is more melodious and mellow, making your performance more pleasant

【Size & Set】 This bone nut and saddle comes in two sets, including two nuts and two saddles. Its nut size is 43*6*9mm, which is consistent. Saddles are available in three sizes: 72*3*9mm, 74*3*9mm, and 76*3*9mm. Don't worry if you accidentally damage it while using it. This suit contains enough products for you to use to get the results you want

【Sturdy & Durable】This nut and saddle is made of 100% high density real cow bone, it is very tough and durable. And cow bones are the traditional choice for making saddles and nuts on quality instruments and are very popular. You can use it with confidence.

【High Quality Materials】 The bone nuts for Electric guitar are made of real bones. Its density is very high and its porosity is very low, so it can transmit vibration well, thus producing excellent tone and clarity. Different from the dull sound produced by plastic nuts , its sound is more melodious and mellow, making your performance more pleasant

【Size 】 This bone nut 2 pieces. Length: 42mm, height: 4.5/3.5mm, width: 3.5mm

【Sturdy & Durable】This nut is made of 100% high density real cow bone, it is very tough and durable. And cow bones are the traditional choice for making saddles and nuts on quality instruments and are very popular. You can use it with confidence.

ITEM: 650 Chord Length Acoustic Guitar Neck

MATERIAL: okoume

SIZE: 600mm*120mm*120mm

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards, penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets (3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards, penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets (3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

The most advanced and precision fret end dressing file available - designed from the ground up specifically for fret ends - this is your most effective weapon in the battle against sharp fret ends, " fret sprout ", and a must-have for a smoother, faster playing guitar that inspires you to play more often.

Precision flat ground, diamond honed and polished bottom - so the file glides across your fingerboard without scuffing the wood, finish or binding. We've teamed up with one of Europe's oldest and most respected file makers to help us create this finely crafted file, then we put the finishing touches and final diamond hone and polish here in our shop. Definitely NOT made in China.

Top of file has a smooth, safe ground edge, and the upper corners and tip are completely rounded and beveled to prevent damage to your fretboard and guitar. Also comes with a top quality, made in USA hardwood handle that feels comfortable in your hand, and takes the pain out of working on your frets.

Precise string action gauge in .010" (ten thousandths of an inch) number increments, and .005" line increments = super accurate guitar setup! The markings are NOT printed - they are actually laser etched through the black surface, deeply into the stainless metal. No printing to rub off! Also check out the new, precision 64ths string action gauge. The accuracy of the FretGuru 2 will bring your guitar out of the realm of woodworking and into another world of playability.

Unique, first of it's kind fret height/fret wear gauge in .005" increments. No more fumbling with calipers, straightedges or feeler gauges.

Fret rocker! The 3 unequal length sides are CNC machined, precision diamond honed and polished. Now you can find that pesky high fret without scratching your frets.

Faster Cut, Smoother Finish - The Dagger’s exclusive D.I.A. (Dual Integrated Arc) design gives you greater cutting control, perfect fret centerlines and a finer fret finish. It’s sharp enough to quickly bring the sides of the fret up to a clearly defined center, without worrying about accidentally taking too much off the top. Some of our customers have even called it foolproof.

Prevent Damage to Your Frets and Fretboard - with the Dagger’s exclusive smooth beveled, contoured edges. The angled cutting surfaces and ergonomic handle are balanced and comfortable, helping to reduce hand fatigue, and also preventing damage to your guitar body by allowing maximum file and finger clearance over the guitar body, switches and pots as you move up your guitar neck. In most cases there’s no need to mask off your fingerboard.

Avoid School Bus Roof Shaped Frets and Their Tone Destroying Effects - Precisely leveled and crowned frets are the very foundation of a great sounding guitar. Worn, grooved, flattened frets will rob you of tone, volume, while doing a number on intonation. Our professional grade crowning file was created with file masters in the heart of Europe to fix these issues. Made from high carbon European tool steel with razor-sharp teeth to deliver a clean, ready-to-be-polished cut every time.

Package Dimensions: 16.8 cms (L) x 6.4 cms (W) x 16.8 cms (H)

Product Type: Instrument Parts And Accessories

Package Quantity: 1

Perform and record clean lines without unwanted string noise.

Easy to use, no tools or special installation required.

Works for guitars, basses, and other stringed instruments.

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Premium string and neck lubricant and string cleaner for all stringed instruments

Silicone free cleaner is liquid in an applicator, not a spray

Use it on strings, fretboard, back of neck

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Complete guitar maintenance in one bottle to clean, polish, and protect

Streak-free, advance formula that smells great

Infused with white Brazilian carnauba wax for an acoustically transparent shield with a high gloss shine

Perform and record clean lines without unwanted string noise.

Easy to use, no tools or special installation required.

Works for guitars, basses, and other stringed instruments.

Perform and record clean lines without unwanted string noise

Easy to use, no tools or special installation required

Works for guitars, basses, and other stringed instruments

Quilling Tools:Our quilling tools are made of plastic and stainless steel, which is sturdy and rust-proof , also it features durable that would not easy to be deformed.

Beautiful Colors: Quilling pens are in different color and light weight to use ,which is easy to carry and not take up too much space in the bag.

Practical Tool:The quilling pens make it easier to twirl paper and are much more comfortable to hold, can help to apply adhesive glue evenly,for thick paper and several glued strips, stretched out a variety of shapes.

11 essential guitar setup tools. It is so compact that you can carry the MTZ11 in your pocket

The convenient center holes in the MTZ11's Body make it easy to access any tool you need

The wrench sizes are written clearly on the body for instant access and use

→ A BRAND YOU CAN TRUST: This skateboard tool comes straight from the same CCS brand that millions of skaters have trusted worldwide since 1985.

→ QUALITY SKATE TOOL: Toss your worries aside! We stand behind our skate tool and we've got your back in the event you're not happy.

→ EVERYTHING YOU NEED: Includes slide in/out screwdriver with allen and phillip heads.

👍 INCLUSION & COMPATIBILITY — The kit comes with the Marine Tech Tools Universal Lifting Ring - MAT0022. It fits directly on all Non-Verado Mercury outboards and any outboard with 1.5” threaded flywheel. Equivalent to Mercury part number 91-904551. (See last image and product description below for detailed information about this tool)

👍 WORKS LIKE A CHAMP — Whether you're trying to lift and remove the motor from your center console boat, repowering, or adjusting your motor; our universal lifting ring or lifting eye will give you ease in handling your outboard properly. It is certainly a must-have for a faster and convenient way of lifting your motors

👍 UNIVERSAL LIFTING SYSTEM — We created a universal lifting system for all the makes and models of outboard motors. Our lifting ring and adaptors are made from high-strength forged stainless steel with grade 12.9 bolts. These tools are strong and solid that they can safely carry up to 1000lbs working load

Most comprehensive tool set to make key adjustments on your electric guitar, acoustic guitar and bass guitar

Ergonomic large handle with universal 1/4" adapter

12 Allen key sizes: .050", 1/16", 5/64", 3/32", 7/64", 5/32", 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm - 3 Phillips: #0, #1, #2 - 3 Flat blade: 2.5, 3, 5 - 7 hex wrench sizes: 10mm, 12mm, 14mm, 1/4" 1/2” (2) & 7/16