Best Allparts Electric Guitar Electronics in 2026

Fit for Squire and Strat/Tele style electric guitar or bass building

The Log A pots are usually used as volume controls

Split shaft 6mm will for most common Knob styles, comes complete with fixing nut and plain washer

3-way switch perfect for semi-hollow, or narrow solid body (non-carved top) Les Paul's - Epiphone and Juniors

PRE-TINNED at the factory for easy soldering

Durable, nickel-plated steel frame

Audio Taper (A) increases or decreases in a sloped curve fashion ; Linear Taper (B) increases or decreases in a linear fashion; Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference.

Long Split shaft with coarse knurling

Shaft Total Length: about 17.5mm; Knurled Shaft Diameter: about 5.8mm; Base Diameter: about 24mm

Versatile Compatibility: Perfect for semi-hollow and narrow solid body Les Paul's like Epiphone and Juniors, enhancing your guitar's performance.

Effortless Soldering: Factory PRE-TINNED for easy soldering, saving you time and ensuring a hassle-free installation process.

Built to Last: Crafted with a durable, nickel-plated steel frame, providing long-lasting reliability and stability.

Includes 4 nuts, 4 flat washers, and 4 star lock washers.

3/8" x 32 threads will fit most CTS pots and Switchcraft input jacks(does not fit Switchcraft 3-way toggle switches)

Nuts uses 1/2" wrench and has a 5/16" inside diameter(3/8" threaded).

Sturdy & Durable: Electric guitar wiring harness is made of high quality material, sturdy and durable, ensure a long time use. Delicate workmanship with good texture, wires are antiaging and durable,great for you to use.

Prewired Wiring Harness: This Electric Guitar 2500K Pots Control Knobs harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pot.Electric Guitar Wiring Kit is easy to install and use.

Perfect Replacment Parts: Use this prewired guitar wiring harness humbucker for electric guitar with 2 humbuckers. Great circuit replacement parts for electric guitar, suitable for banjo lovers.

Circuit wiring set compatible for LP SG EPI Style electric guitar, Material: Metal and wire, Switch Cap: White

2 volume / 2 tones / 3 way switch, 2 capacitors, 1 input jack socket, prewired components make for an easy install, each tone pot has its own 2A473J capacitor, as well replace all the electronics.

2 Volume and 2 Tone Knob Pots: 2 B500k full size potentiometer, 2 A500k full size potentiometer, Pots Shaft length: approx. 18mm / 0.71", Base diameter: approx. 16mm / 0.63", Switch: Approx. 18 x 28 x 49mm / 0.71 x 1.1 x 1.9 inch

EASY INSTALL: This wiring harness is completely prewired. What you need to do is solder your guitar pickups to the switch and ground them to the volume pot. It is very easy to install.

PREMIUM MATERIAL: Made of high quality metal and electron components, this guitar wiring harness set has excellent workmanship and good texture, it is durable and convenient to use.

PACKAGE CONTENT: This package comes with 2 screws, 6 nuts and 3 gaskets, no need for other mounting accessory, easy to operate.

Volume B50K; Pickup MN250K

Bass: +/- 14dB 80Hz B100K; Middle: +/- 8dB 900Hz B100K; Treble: +/- 23dB 3-7KHz B100K

P1 should be wired with neck pickup positive; P2 should be wired with bridge pickup positive; GND should be wired with two pickups negative

Metric thread nuts and washers are used on most import jack sockets which made in Asian countries. Please confirm the thread type of your jack sockets before ordering.

These nuts DO NOT fit USA thead jack sockets such as Switchcraft jack sockets

Nut inner diameter 8.4mm(21/64"); Outer diameter 12mm(15/32"); Thickness 2mm(5/64")

EASY TO INSTALL: Simply solder your pickups to the switch, and ground them to the volume pot, then you can play your electric guitar.

PREMIUM MATERIAL: Electric Guitar Wiring Harness is made of qualified metal and electron, the wiring harness provides a long term service life.

DOUBLE ELECTRONIC CIRCUIT: Electric Guitar Wiring Harness is suitable for double electronic circuit electric guitar, so get it right for you before ordering.

(2) CTS 250k Potentiometers · Low Noise · Robust Construction Proprietary Anti-Static Lube · Brass Shafts · Brass Bushing · Smooth Feel · Vintage Taper · Reduced Shaft Wobble. These pots are made to the highest quality specifications possible by CTS.

(1) Oak/Grigsby 3-way switch

(1) Switchcraft mono input jack

Metric M8 Nuts and Washers for Metric threaded Pots

Nut inside diameter: about 7.4mm

Washer inside diameter: about 8.2mm

The pot is constructed with copper shaft sleeve, offers excellent durability and ability to decrease noise.

Three-way switch is designed for electric guitar circuit wiring. 2 volume 1 tone 1 jack wiring harness for electric guitars.

Electric Guitar Wiring Kit is made of quality materials with fine machining, lightweight, wires are anti-aging and durable.

♫EASY INSTALL: This wiring harness is completely prewired. What you need to do is solder your guitar pickups to the switch and ground them to the volume pot. It is very easy to install.

♫PREMIUM MATERIAL: Made of high quality metal and electron components, this guitar wiring harness set has excellent workmanship and good texture, it is durable and convenient to use.

♫PACKAGE CONTENT: This package comes 2 screws 6 nuts 3 washers, no need for other mounting accessory, easy to operate.

Treble Bleed Circuit comes fully assembled for easy installation; The circuit is connected to the input and the output of your volume potentiometer.

This Treble bleed circuit is the only real solution to combat “Volume versus tone” issues. It prevents loss of high frequencies when turning down volume when installed between hot in & out of your guitar's volume pot.

Improve the sound greatly; The volume knob does not alter the tone when the volume is lowered

Manufactured by CTS, distributed through Allparts

Hardware Included (2 Nuts, 1 Dress Washer, 1 Lock Washer)

Split, Knurled Shaft

DPDT mini switch.

EP-0081-010.

With mounting hardware.

KAISH well designed and well made adjustable brass roller nut

Solid brass and Durable; Dimensions: 43mm(length) * 7.2mm(width) * 8mm(height); E to E string 36mm; Please make sure the dimensions are correct for your project

Very easy to install with pre-slotted; Brass materials supply a nice smooth sustain

Genuine AllParts Item