Best The Art Of Tone Electric Guitar Electronics in 2025

2 Pack Pure Tone PTT1 Mono Full-contact Output Jacks

US Spec - Requires a 3/8 inch mounting hole

2 concave ground contacts and 2 concave hot leads

Controls Volume and Panning

Stereo inputs and outputs

Use with active or passive signal in

7 strand, pre-tinned easy to solder, highly workable

push back cloth sleeve does not require cutting just push and solder

3 feet each of black & white cloth wire

Mogami GOLD INSTRUMENT-RR Guitar Pedal Effects and Instrument Cables provide crystal-clear tone and a drop-dead silent background. The top choice for wiring professional recording studios for decades, Mogami Gold Instrument Cables exhibit amazing clarity and preserve the unique personality of your instrument and effects.

Engineered for the highest level of transparency, Mogami Gold Instrument Cables are constructed with a conductive polymer sub-shield, an Ultra High Density (UHD) spiral shield, and an oxygen-free copper (OFC) core. For musicians on the move, Mogami Gold Instrument Cables are also designed with a carbon impregnated PVC anti-static shield layer to prevent all handling noise.

Wired with Mogami Guitar/Instrument High Impedance Cable, Mogami Gold Instrument Cables feature high definition sound ideal for use with acoustic guitar, electric guitar, bass guitar, keyboard, pedal effects, and other unbalanced instrument cable applications.

The finest OEM component brands – the RIGHT parts for your application

All hardware included, and it’s the right hardware - you’ll have everything you need

No generic parts (450G pots, 400V/600V caps, etc.) - only the best custom parts, tailor-made for us

The industry standard for output jacks

Accepts standard mono 1/4" plugs

For electric guitars, basses, amps, and pedals

Audio Taper

3/8-32 US thread

Split, fine 24-tooth, knurled, 1/4" diameter shaft

The Quarter Pound for Tele Rhythm's custom overwound coil provides a powerful midrange that cuts through any mix without sounding bright or brash. This makes it a rhythm beast with huge sounding chords, and full, fat lead tones.

Power up your Telecaster with the upper midrange growl and drive of the Quarter Pound for Tele Set.

The Quarter Pound for Tele Set delivers humbucker level punch and saturation in a true single coil package.

CONDUCTOR: 20 AWG Mono Copper Conductor Allows Optimal Audio Performance

SHIELDING: Copper Clad Steel Braiding Over 100% Dual Layer PVC / LDPE Insulation Prevents Electromagnetic Interference (EMI)

PLIABLE & DURABLE CABLE: Soft Rubberized PVC Jacket Is Extremely Flexible Yet Made To Be Over 6mm Thick To Reduce Handling Noise And To Stand Up Against Heavy Use

Product 1: The Treble Bass Expander (TBX) is a detented, stacked 250K / 1Meg control that enhances your tonal palette

Product 1: It functions as a standard tone control from 1 to 5; after 5 it decreases resistance, letting more bass, treble, presence and output flow to your amp

Product 1: No battery necessary

Fit for Squire and Strat/Tele style electric guitar or bass building

The Log A pots are usually used as volume controls

Split shaft 6mm will for most common Knob styles, comes complete with fixing nut and plain washer

6.35mm 1/4 inch TR solder type jack with washer and nut

Great Quality, all metal part are made of brass copper with Nickle plated finish. Well make, heavy duty and solid

Super for replacing the broken jacks on electric guitars,speakers,footswitch,fender and so on

These nuts DO NOT fits metric pots or other sizes USA pots, please verify the thread type and diameter of your pots before ordering

3/8" threads will only fit most CTS pots and Switchcraft jacks (does not fit Switchcraft 3-way toggle switches)

Nuts uses 1/2" wrench; Flat washer is 5/8" outside diameter and 3/8" inside.

Split shaft with Fine Spline Knurled; Shaft Length:18.5mm; Shaft Diameter: 6mm; Base Diameter: 24mm

It's made in CTS Taiwan Company, we have shown the detailed factory diagram for the pots, please verify the diagram if you have any doubts. CTS has several factories that all of them can produce guitar pots

A' means Audio Taper which increases or decreases in a sloped curve fashion ; 'B' means Linear Taper which increases or decreases in a linear fashion

Active Humbucking-sized Electric Guitar Pickup Set with Multi-voice Fluence Ce - Black

Feature: The 3 way guitar toggle switch is made of metal. The black switch tip is Aluminum anodized. Delicate appearance with strong Construction.

Function: The guitar toggle switch is 3 position design. Lugs are tinned so that easy soldering. Including knurled mounting nut and flat washer.

Size: The oversize of the pickup selector switch is 1.29*0.34*2.03 inches(32.7*8.5*51.5MM), The Threaded shaft is 12mm Dia.

250K "no-load" potentiometer

3/8" split-shaft design

Takes push-on control knob

3 position pickup selector,ideal for Asia made Les Paul Style guitar

Metric Size,Material:brass & plated black

Threaded shaft 12mm diameter by 9mm tall

Audio Taper (A) increases or decreases in a sloped curve fashion ; Linear Taper (B) increases or decreases in a linear fashion; Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference.

Long Split shaft with coarse knurling

Shaft Total Length: about 17.5mm; Knurled Shaft Diameter: about 5.8mm; Base Diameter: about 24mm

3X CTS 250K 450G Series Solid Shaft Audio Taper Pots - 10% Tolerance

1X .047uf Orange Drop Capacitor

3 feet Vintage-correct 22AWG Tinned Cloth Push Back Wire (18 inches Black & 18 inches White)

Made of plastic,not Metal

The tips have a cross hole which length is about 4.8mm

The tips fit USA made Oak or CRL switches with 4.8mm blades,such as USA Fender Strats, not Squier Strat switches or other switches made in Asian countries with smaller blades

Enamel-coated magnet wire delivers warm vintage-style tones

Alnico 5 magnets add more focus and enhanced dynamics

Staggered polepieces balance volume and output across every string

KAISH brass electrosocket jackplate with brass Mono output Jack Socket; Well made with flawless finish; Great upgrade for traditional Tele jack socket

Metric thread is compatible with most import Jacks and American 3/8"-32 UNEF-2A Thread is compatible with most USA made jacks (such as switchcraft jacks); Please make sure to choose the right threaded Electrosocket Jackplate for your output jack

For Standard 7/8"(22mm) Diameter Hole; Sturdy and Reliable; The jack makes quality connections for your guitar and hold the cables in well without loose connections

Volume, gain and tone controls

Aux-in for jamming with external sources

Rechargeable battery that lasts around 4 hours per charge

Circuit wiring set compatible for LP SG EPI Style electric guitar, Material: Metal and wire, Switch Cap: White

2 volume / 2 tones / 3 way switch, 2 capacitors, 1 input jack socket, prewired components make for an easy install, each tone pot has its own 2A473J capacitor, as well replace all the electronics.

2 Volume and 2 Tone Knob Pots: 2 B500k full size potentiometer, 2 A500k full size potentiometer, Pots Shaft length: approx. 18mm / 0.71", Base diameter: approx. 16mm / 0.63", Switch: Approx. 18 x 28 x 49mm / 0.71 x 1.1 x 1.9 inch

Circuit wiring set for SSS SSH style Fender Squier Stratocaster electric guitar, material: metal and wire, switch cap: Black

Wiring harness: 1 volume / 2 tones / 5 way switch, 2 capacitors, 1 output jack socket

1 Volume and 2 Tone Knob Pots: Two A500k potentiometer, 1 B500k potentiometer

Volume B50K; Pickup MN250K

Bass: +/- 14dB 80Hz B100K; Middle: +/- 8dB 900Hz B100K; Treble: +/- 23dB 3-7KHz B100K

P1 should be wired with neck pickup positive; P2 should be wired with bridge pickup positive; GND should be wired with two pickups negative

These include Two volume/ Two tones / Three way switch.Two A500k potentiometer, two B500k potentiometer, two 2A683J capacitors, one jack socket.

Circuit wiring set with 3 box toggle pickup selector 2V/2T/1J is especially designed for LP electric guitar.

If you want to install an electric guitar yourself,this harness kit to control the volume and tone is essential for guitar lovers.

3 Way toggle switch, ideal for Asia made Gibson Les Paul (LP) 、SG Electric Guitar or Epiphone guitar

Threaded shaft 12mm diameter by 9mm tall

Including knurled mounting nut and flat washer;The switch tip is replaceable

Material is plastic, not made of Metal

The cross hole fits most U.S. Telecasters which use Oak-Grigsby or other USA SWITCHES with 3/16" wider Blades, it also fits Import, Squier, or other Metric switches with smaller 9/64" Blades

No matter any models of switch on your guitar, please double-check that your switch blade is 3/16" OR 9/64" wide (+/- 0.005'' error)