Best Daiertek in 2026

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Quick Charge: Dual USB Rocker Switch designed with dual USB ports supporting.USB outlet: 12-24VDC input, power outlet 2.1A & 2.1A.USB socket can intelligently detect your devices and simultaneously charging 2 devices at optimal current. Charging speed are faster than conventional chargers and works for all USB-powered devices.

LED Voltage Display: USB car charger adapter socket builts in digital LED voltage monitor, it can display accurate voltage status of your vehicle's battery at the real-time. When the connection is successful, the light will illuminate. It's easy to check if connection is current and can be find and be used clearly in a dark environment.

Material: USB car charger adapter socket is made of ABS material.This material is flame retardant and environmentally friendly.Works even in high or low temperature environments.The cover is made of rubber material the voltage also can be read when the cover is engaged.

Feature: The waterproof toggle switch is made of metal and bakelite. The shaft and bracket are both made of Brass Material. Switch with M12X0.75 weatherproof Boot Cap Cover, can effectively protect the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Function: Waterproof toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC; 15A 250VAC; 20A 125VAC.

Installation: Mounting hole size is 0.48 inches (12.2MM). Each of the terminals has a machine screw for quick connections, The thickness of Terminals is 0.8mm.

Features: Waterproof 12VDC lighted rocker switch is a miniature rocker switch. Available colors of button: black/blue. "O I" marked on the button.

Materials: Round Waterproof 12V DC illuminated rocker switch is made of nylon 66 and IP65 material. The terminal is made of brass, silver plated.

Function: Waterproof 12 volt marine rocker switch has 3 pins (easy to turn ON/OFF), and SPST (single pole single throw) design with a set of jumpers. The rating is 20A 12VDC.

Dual LED Marine Switch: The marine switch of the 6 gang rocker switch panel is dual led marine switch design, choose lower led always on can help you easily locate the switches in dark.

Cigarette Lighter Socket: The cigarette lighter socket of the toggle boat switch panel fits for all 12v to 24v accessory plug, and can be used with latest car chargers to quick charge latest model phones.

Dual USB Port Socket: The marine rocker switch panel waterproof contains a 5V 2.1A and 5V 1A dual usb port socket, which enables a wider charging range of electronic equipment.

【Product Name】- Bus bar terminal block 12v, these battery bus bar 12v will come in pairs, includes one positive bus bar (red) and one ground bus bar (black).

【300A M10 Stud Busbar】- This battery distribution block can handle max 300A continuous amperage at Max 300V AC or 48V DC voltage. Each battery terminal block includes - 6 x M10 (3/8")terminal studs.

【Round Corner Base】 - This 12v bus bar is unique round corner base design, which makes the marine bus bar unique and special, looks more extraordinary compared with others.

Feature: The 5mm LED lamp holder is made of Copper with Chrome plated. Copper immediately offer a quality advantage, more waterproof than plastic to keep the integrity of the enclosure.

The support of this LED mount is made of plastic,that can hold the LED firmly. Housing color is black. Easy to use and install, very practical.

Size: Fit LED Diameter: 5mm (0.2 inches); Thread Diameter: 8mm (0.3 inches); Total Length: 15.2 mm (0.6 inches).

1.Feature: This 12 volt push start button is momentary SPST design. The momentary push button switch with a black neoprene cover can prevent water, moisture and dirt.

2.Size: The height of the starter switch is 2.46 inch(without cover), the diameter of the starter button is 1.1 inch. The reqiured mounting hole of the horn button switch is 5/8 inch(0.625 inch).

3.Voltage: The rating of this waterproof engine start button is 50A 12v.

Feature: SPST 5 PIN ON OFF rocker toggle switch (Single Pole Single Throw) with 12V - 24V BLUE LED Light. IP66 Waterproof Rocker Switch with 20A 12VDC Rating.

The 12V Rocker Switch with dual LEDs, the lower light is constantly illuminated when the switch is connected to the battery(clearly see the switch in the dark). Both lights are illuminated when the switch Powered ON.

The Boat Marine Rocker Switch with 1.46 * 0.83 Inch Panel Mounting Hole Size, It's sturdy and durable and easy to install or replace.

Function: SPST 2 PIN ON/OFF marine rocker switch 12V. 2 Pin rocker switches make the wiring become simple, easy and convenient for you.

Rating & Feature: 20A 12V DC; 10A 24V DC. This heavy duty rocker switch for utv is non-light design, which makes it require no addition power, help you protect your battery better.

Mounting Hole Size: the required mounting hole size of this 12v rocker switch is 1.46 * 0.83 inches. This waterproof rocker switch is sturdy and durable, easy to install or replace.

Feature: The SPST toggle switch waterproof is made of metal and bakelite Material. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Function: This toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC; 15A 250VAC; 20A 125VAC, Heavy Duty Version.

Installation: Mounting hole size is 0.48 inches (12.2MM), with #250 Spade Terminals(6.35X0.8mm) for quick connection.

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

【30A Rocker Switch】 It's a Large Current Heavy Duty Rocker Switch, the Switch Rating is 30A 250VAC. So the switch can be used well on 3A, 6A, 10A, 15A, 16A, 20A, 25A, 30A at 120 Volt or 240 Volt.

【Red 120V Rocker Switch】 This lighted Rocker Switch with Red Lamp, The input voltage for the lamp of switch should be AC 110V to 250V. The Switch Lamp will light up to indicate the operating status of the device when the switch is turned ON.

【ON OFF DPST Switch】 It's a DPST 4 Pin ON OFF Rocker Switch, Double Pole Single Throw design, and T125 Temperature Degree(-25C to +125C).

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

☞ Quick Charge 3.0: USB car charger adapter socket designed with dual USB ports supporting QC 3.0, whose max single output is 18W. Built-in official smart chip, will intelligently detect your devices and simultaneously charging 2 devices at optimal current. Charge compatible devices up to 4 times faster than conventional charging.

☞ LED Voltage Display: USB car charger adapter socket builts in digital LED voltage monitor, it can display accurate voltage status of your vehicle's battery at the real-time. Preventing low voltage from affecting normal operation. The LED light is blue and can be clearly seen in the dark.It is compatible with most vehicles with a voltage of DC 12-24V connections

☞ Material: This USB charger socket is made of advanced aluminum alloy material and will not overheat in high temperature environment. It has good heat dissipation performance, non-flammability and wear resistance. The waterproof cover can effectively protect the switch, and the current voltage value can still be displayed after using the protective cover.

【Product Name】- Marine bus bar 12v, these 12v bus bar terminal blocks will come in pairs, includes one positive bus bar (red one) and one ground bus bar (black one).

【Terminals & Rating】- Each battery bus bar includes - 6 x M6 (1/4") terminal studs. This bus bar 12v marine can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.

【Round Corner Base】 - The 12v power distribution block is unique round corner base design, which makes the battery terminal block unique and special, looks more extraordinary compared with others.

Feature: SPST 3 PIN ON/OFF blue led rocker switch 12v. LED Function: Turn the 12v rocker switch on, the led on; turn the switch off, the led off.

Dimension: This marine switch required 1.46" (37.2 mm) x 0.83" (21.2 mm) mounting hole size. The snap-in mounting type make the installation of the boat switches become easy.

DIY Sticker: The package of this boat switch includes two type of stickers: transparent sticker and night glow sticker, which provide more options for the customers to make their own boat rocker switch.

Feature: The door pin switch is made of metal with chrome plated.The push actuator is made of plastic.Universal car truck electronic pin switch.

Function: Door pin switch is ON-OFF momentary design.The rating is 20A 12VDC.

Size: Mounting hole size is 0.315 inches (8MM).Total length is 2.78 inches(70.5 MM).Length adjustable by move two lock screws.

Feature: The Safety cover toggle switch is 2 Pin SPST(single pole single throw), designed with rocker style, easy to turn ON OFF. The switch rating is 20A 12V DC; 15A 250VAC; 20A 125VAC Heavy Duty.

Material: The safety cover toggle switch is made of Brass Actuator&threaded shaft and bakelite Housing. It's nice looking and Durable.

Red Aircraft Guard Cover prevents accidental start. The toggle switch can be activated only after you flip the switch guard cover. And the switch get OFF automaticly when you close the cover. That can effectively prevent accidental touch on the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Type: This momentary toggle switch is a 3 pin SPDT 3 way toggle switch, the function of this 12v toggle switch is (ON)/OFF/(ON).

Rating: 20A 12V DC; 20A 125V AC; 15A 250V AC. This momentary switch is a heavy toggle switch 12v.

Installation: The mounting hole size of this 12 volt toggle switch is 12mm (0.47 inch). Each terminal of the 12v momentary switch has a machine screw for quick connections.

Feature: The 3 way guitar toggle switch is made of metal. The black switch tip is Aluminum anodized. Delicate appearance with strong Construction.

Function: The guitar toggle switch is 3 position design. Lugs are tinned so that easy soldering. Including knurled mounting nut and flat washer.

Size: The oversize of the pickup selector switch is 1.29*0.34*2.03 inches(32.7*8.5*51.5MM), The Threaded shaft is 12mm Dia.

【Red LED lighted Rocker Switch】 This Round Rocker Switch with 12VDC Red LED, The Switch LED will light up to indicate the operating status of the device when the switch is turned ON.

【Waterproof Rocker Switch】 The Small switch with a rubber covered the switch actuator to against dust, Oil and Water, IP65 degree.

【ON OFF Switch】 It's a SPST 3 Pin ON OFF Rocker Switch, Single Pole Single Throw design, with 20A 12V DC Switch Rating.

Measuring range: DC 8-48V,Accuracy: 0.1V. Widely used under DC 12V 24V with Blue LED Digital Display, Work great to Test Battery Voltage.

The 12 volt meter Is waterproof design. Mounts in a 1 1/8 inch hole in panels up, a nylon retaining nut holds the meter in place.

Digital Voltmeter Display: Precise 3-bit LED digital display, this 12v DC voltmeter real time monitoring of battery voltage, easy for you to know the status of the battery.

Well-designed: This Rocker Switch Panel Holder Housing is designed for safe and quick switch installation.

Size: This Switch Panel Holder Housing with 2.04*1.08 Inches Cut-out; Inner Cut-out Mounting Hole for Rocker Switch is 37.5*21.2mm (1.48*0.83 inches); Housing Bezel Size: 2.36*1.42 inches.

Material: High quality ABS Plastic UL94 V0 fire resistant,Tough and Durable.

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Black Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Function: Red LED lighted toggle switch with 3 pins, SPST ON OFF design (single pole single throw), designed with rocker style, easy to turn ON/OFF.

Feature: This illuminated toggle switch is made of metal and Bakelite with 20A 12V DC Heavy Duty Rating. The RED LED will be illuminated when the switch is Turned ON.

Size: Panel Mount type switch, The mounting hole size of this 12 volt togggle switch is 0.48 inches (12.2MM), 6.35 X 0.8mm size Terminals for #250 Quick-Connect.

Function: Blue LED lighted toggle switch with 3 pins, SPST ON OFF design (single pole single throw), designed with rocker style, easy to turn ON/OFF.

Feature: This illuminated toggle switch is made of metal and Bakelite with 20A 12V DC Heavy Duty Rating. The BLUE LED will be illuminated When the switch is Turned ON.

Size: Panel Mount type switch, The mounting hole size is 0.48 inches (12.2MM), 6.35 X 0.8mm size Terminals for #250 Quick-Connect.

【Feature】 - The door pin switch is made of nickel plated iron, which will come with a rubber made waterproof cover cap, rated at 20A 12V DC.

【Function】 - The hood pin switch is a momentary ON/OFF switch, normal closed design, which will act as door closed, switch OFF; door open, switch ON.

【Size】 - The mounting hole size is 0.37" (9.5MM). And the total length is 1.89" (48MM), which is adjustable design, you can cut the exceeded part according to your need.

Latching Push Button Switch: Press the button - POWER ON, Release your finger - Maintain POWER ON, Press the button again - POWER OFF. It's SPST Normal Open Self-Locking Pushbutton not Momentary.

12mm Panel Mounting Hole Size, Φ9.5mm dia. High Round shape Button with Power Symbol, and Φ13.8mm dia. Bezel.

The switch with Wire Harness for easier connection of circuit. Green wires for SWITCH+ and SWITCH-,RED and Black wires for LED (LED doesn't distinguish between positive and negative).

Material: Guitar effect knobs is made of ABS (plastic),set screw with brass insert.Fits 1/4" (6.35mm) shaft diameter pots.

Total Height: 15.78MM; Base Diameter: 12.7MM

The knob is available in three colors: Black or White or Cream. (If you need more colors, you can contact us.)