Best Illuminated Pushbutton Switches in 2026

This Push Button Switch Warranty 3 years . If there are quality problems within 3 years, you can send us email. We will send you new ones.

Special attention: Light connect to 110V -220V,Can light up ；Ith : 10A; Ui : 600V; Material : Plastic and Metal; Terminal Quantity : 4; Contact Type :1NO, 1NC; Action Type : Momentary.

Waterproof grade ：IP65;LED Button Color : Red, Green.Mount Hole Diameter : 22mm / 0.87"(7/8"); Fit Panel Thickness: Max 0.5cm / 0.2".

ON/OFF ILLUMINATED PUSH BUTTON SWITCH: 4 pin metal push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push button: 12mm.

EASY TO CONNECT & DURABLE: Latching switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSH BUTTON SWITCH: On/off push button switch with red indicator light, switch and LED ring light is separated, LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

Specifications: 12mm with LED self-locking button switch (5PCS).

How to use: press to turn on; press again to turn off. Contact configuration: 1NO.

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Mounting Hole diameter: 16mm

Type: Momentary, 1NO 1NC

Ambient Temperature: -25°C to + 55°C

Specification: Latching push button switch 12v on off function with blue LED ring illuminated. Silver shell metal push button switch requires 19mm (about 3/4 inch) mounting hole size. Rating: 5A 12V DC; 5A 250V AC.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

Wire Harness: The package of the led push button switch also contains becoming wire harness for the round 19mm push button switch, the clasp design of the wire harness make it easy to install and remove.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

APIELE Brand New 22mm Momentary Push Button Switch 1 Pcs Red 1 Pcs Green

Ui: 660V; Ith: 10A ;Contact Type: SPST Red (1 1NO 1NC) Green (1 NO 1NC)

Latching Push Button Switch, 5 PIN ON OFF 1NO, 1NC, Maintained, Push it, ON(Keep ON after you release your finger / Self-Locking); Push it again, OFF; 50 ICON Push Button Switch Labels for DIY use.

12V Push Button Switch with DC 12 Volt Blue LED illuminated. If you use it in an 120V environment, please connect a 150KΩ resistor in series to the LED pin.

Waterproof Push Button Switch IP65 degree sealed, can be used in wet or dusty enviroment. Aluminum Anodized Black Metal Push Button Switch

Self-Locking Version: Latching push button switch 12V with ON OFF SPDT (1NC 1NO) latch function flat button design. The panel mounting hole dia. of this metal push button switch is 22mm (about 7/8 inch) with 5A 12VDC rating.

12 Volt Blue LED: The 22mm push button switch with 12V blue LED ring Halo illuminated design, which can help you easily locate the 12v switch when you are surrounded in the dark.

Wiring Harness: The 5 pin push button switch contains wiring harness, It's with 5 wires and 0.6 inch length, the clasp design of the wire harness make it easy to install and remove.

Latching Push Button Switch: 12v push button switch 19mm with wire socket, 4 pin (2 switch pins and 2 LED pins).

Function: Push button switch 12v, you can choose suitable wiring methods according to your needs. Self locking ON/OFF Design: Press - switch ON; Press Again - switch OFF.

Rating: 20A 12 Volt DC, different with other 12v push button switch, this latching switch is a heavy duty waterproof push button switch.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Product name: 2 pcs 22mm Plastic 2 Position Selector Switch

Terminal Quantity: 4 screw terminals. Ith : 10A;Ui : 440V

✨push button starter switch: with 12V led illuminated power symbol, you can choose blue, green, red color.

✨push button toggle switch: Black buttons Material Aluminium

✨latching push button switch: Means you press, the button will stay up, When you press again, The push button will recover.

[Working Mode]: Push and Release, button locked, Normally Open Circuit ON. Push and Release again, button recovered, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF Self-Locking. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:16mm. Mounting hole diameter should be at least 16mm(0.63") and Smaller than 16.2mm(0.64")

(Pack of 2) The LED illumination(12V) of this product can be switched in three colors(Red,Green,Blue)through wiring diffrent terminals; Four pins: one for each color and a common cathode (41RGB)

Dia:16mm,1NO,Stainless Steel,Momentary(Reset) Waterproof: IP65(IP67 can be made to order)

Mechanical Life: 1000,000 cycles; Electrical Life: 50,000 cycles

[Working Mode]: Push and Release, button locked, Normally Open Circuit ON. Push and Release again, button recovered, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF Self-Locking. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:19mm. Mounting hole diameter should be at least 19mm(0.75”) and Smaller than 19.2mm(0.76”).

Chrome color

5/8 inch

Up to 24Vac

1. Easy install, Suitable for wood and metal console.

2. The LED lights have to distinguish between positive and negative interface. If not bright. Please redeem the LED interface.

3. The Size: 44x44 mm and Supports DC 12V Power

Momentary pushbutton - Electrical Rating: 21A, 24VDC, Ring LED Illuminated

24V switch with LED Button - Enclosure Material:Stainless Steel;Housing Color : Silver Tone; Head Shape : Flat Round;Momentary Type: Push & Hold - ON, Release - OFF.

Momentary switch - IP65 Waterproof ,can be used in wet environment;can be cleaned and maintained conveniently.Excellent quality and long service life.

40A Power Relay,5-Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability

The Wires Are Made By Heavy-Duty Material And Have Better Conductivity For The Main Contact And Pre-Wired With 7" Pigtail Leads

Excellent Construction:Interlocking Design Relay Socket Harness Base For Easy Cable Management & Organization.

This is a perfect choice if you are in need of a rugged push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated Green LED Ring.

It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off functions with cable length 1m / 3.3ft.

These latched buttons are rated up to 5A and 250V AC while the LED is rated for 3-6V.

Specifications: You will get a Brand New Green Aluminium Mushroom Head Push Button Switch.The rated voltage of this switch is: 250V AC, rated current: 5A, required aperture: 7/8''/22mm.

Function: Mushroom Momentary Push Button Switch.The switch is compact and operates quickly and gently.

Design: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).Contact Configuration: 1NO.

【Reliable Material】The panel is adopted laser cutting anodized aluminum oxide, while the push button is stainless steel material. The size is 124*40*2mm, compact and good-looking.

【Blue LED】Each button can control one device. When the button is pressed, the device is turned on and the indicator light is illuminated, allowing you to precisely locate the button even in the dark.

【IP65 Waterproof】With IP65 grade protection, waterproof and anti-dust, the pushbutton switch can work in wet condition but NOT under water. You DO NOT need to worry about the water splash.

Modular Design for Easy Installation and Wiring

Additional Contact Blocks (up to 6) can be added for Different Configurations

Industrial Grade for Tough Environment

Medium sized button large enough to press but not get in the way

Built-in blue LED controlled separately from switch action

4 contacts - 2 for the button and 2 for the LED

<b>Price For:</b> Each <b>Product Range</b>: R13-584 Series <b>Contact Configuration</b>: SPST <b>Switch Operation</b>: Off-On <b>Contact Current Max</b>: 3A <b>Contact Voltage AC Nom</b>: 250V <b>Switch Terminals</b>: Solder

Specifications: PBS-33B(SD-211), brand new Round Push Button Switch - pack of six.There are five colors for you to choose from.

Function: The input voltage of this classic round head button switch is 3A 125V AC. After pressing and holding the switch, the device immediately enters the working state; after releasing the switch, the device immediately stops running.

Design: switch is 2pin, single pole single throw design, with 200mm/7.87” pre-soldered wire,mounting hole size is 12mm/0.5inch.

If need other voltage, leave message while place order. If no message, we will send the item in 12V.

Certification:CCC

XB4BW35G5 SQD Illuminated push button, metal, flush, orange, 22, spring return, 110

Specifications: R13-507, brand new Round Push Button Switch - pack of ten.

Function: The input voltage of this classic round head button switch is 3A 250V AC/6A 125V AC. After pressing and holding the switch, the device immediately enters the working state; after releasing the switch, the device immediately stops running.

Design: switch is 2pin, single pole single throw design, mounting hole size is 16mm/0.63inch.

DUAL PUSHBUTTON SWITCH

EXTENDED

GREEN