Best Led Car Pushbutton Switches in 2026

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New 16mm Latching Switch; Black Shell Ring LED; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC； 12 volt switch

Water Drop Shape Paste Type DIY Button Switch, Small size rocker switch, does not occupy much space, rectangular design, sensitive keys, will not be triggered by mistake.

Easy to controll the circuit power OFF/ON. use power supply 7A/12V, maximum 10A/12V, voltage range: 0-220V, the higher the voltage, the current will decrease, 220V is less than 3.5A current.

Attached with black, white &black leads (Length: approximately 18.5"IN )

Mounting Hole Diameter: φ19mm

Red LED voltage: 12V only ; Switch Rating : 250V 5A

Shell Metarial:Stainless Steel (waterproof degsain)

Latching switch: Push it, ON; Push it again, OFF

Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Operating Current: 6 (A)

Operation : Push-On, Push again-Off, SPST switch

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

ON/OFF ILLUMINATED PUSH BUTTON SWITCH: 4 pin metal push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push button: 12mm.

EASY TO CONNECT & DURABLE: Latching switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSH BUTTON SWITCH: On/off push button switch with red indicator light, switch and LED ring light is separated, LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

Specifications: 12mm with LED self-locking button switch (5PCS).

How to use: press to turn on; press again to turn off. Contact configuration: 1NO.

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

➤This is a unique SPST ON/OFF Push Button switch developed specifically for the pursuit of individuality and perfection in you.

➤Easy to controll the circuit power on/off，DIY Button Switch Water Drop Shape Paste Type

➤Attached leads (Length: approximately 78.7"IN )

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch；LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Momentary switch operation type: Push & Hold,ON; Release,OFF；Pre-wired design:easy to install,save your time to connect wire to the switches.

Switch Shell Color: Black;Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles；2 year warranty

Mounting Hole Size: Φ16mm, Switch Rating: 5A/250AC, Switch Combination : 1NO1NC

12V Waterproof Push-Button Switch with quick connector, press once to open, then press again to close.

Push Button Switch with waterproof rubber boot, about 20cm AWG18 wire. 3M tape on the back and easy to install quick connector.

Ideal for any 12 volt DC application that requires a waterproof on/off push button switch.

Specifications: 12mm Momentary push button switch without Led(5PCS).

How to use: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Momentary (ON)/OFF switching. Press and hold for ON, release for OFF.

Blue angel eye LED ring illuminates when pressed

Pushbutton rated 3 amps at 12vdc

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

Latching switch: Push it, ON; Push it again, OFF

The newer model of U16C2, with a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

[ ✔ Brand New Push Button Switch ] Rating: 5A 12V DC; Mounting Hole Size: 0.63" (16mm); Operation Type: Latching; Push it, ON; Push it again, OFF. Contact Configuration: 1NO 1NC.

[ ✔ Ring RED LED Light ] 12V LED pushbutton switch use pole-less lamp beads. Bright and comfortable lights plus a metal appearance make the on-off switch very cool. The work-life of the led light is more than 40,000 hours.

[ ✔ WATERPROOF & ASEISMATIC ] IP65 Waterproof protection can be used in a wet or dusty environment, such as boat control panels, kitchens, outdoors, etc. A high-quality aluminum alloy metal shell tolerates vibration and other harsh environmental conditions.

Product Name: 12 volt switch on off, 12V Latching Push Button ; Latching switch: Push it，ON; Push it again，OFF；Contact Configuration: 1NO1NC；Protection level: IP65, IK10;

Mounting Hole Size : Φ19mm/0.74''；LED voltage: 12V/24V DC; Rated current: 3A; Blue LED Light.

High quality metal material & IP65 waterproof protection; The switch can be used in car motorcycle boat yacht modified, computer appliance lamp switch, industrial control, access control

Silver Stainless Steel Pushbutton Switch

LED voltage: 12V

Hole size required 19mm

Durable ABS plastic anti-retardant material

Voltage: DC 12V;Dimension: 34 * 24 * 53mm/1.34" * 0.94" * 2.09"

Symbol laser etched directly onto the switch face to ensure long image life,with Blue Led light

Latching Push Button Switch: Press the button - POWER ON, Release your finger - Maintain POWER ON, Press the button again - POWER OFF. It's SPST Normal Open Self-Locking Pushbutton not Momentary.

12mm Panel Mounting Hole Size, Φ9.5mm dia. High Round shape Button with Power Symbol, and Φ13.8mm dia. Bezel.

The switch with Wire Harness for easier connection of circuit. Green wires for SWITCH+ and SWITCH-,RED and Black wires for LED (LED doesn't distinguish between positive and negative).

Product name: Push button switch;Color: Black

Voltage & Current: DC 5A/24V 10A/12V (Use at less than 120 watts)

Switch head size: 1.66'' X 1.1'' X 1'';Wire Length: 11.8''

[Ring LED 12mm Latching Push Button Switch] Push it - ON, Push it again - OFF. Contact Configuration: 1NO1NC; DC12 volt Self-locking Switch.

[Aluminium Alloy Shell High Round Pushbutton Switch] 12mm 1/2" Mounting Hole, durable for a longer lifetime can up to 500,000 cycles.

[Easy to Install] Round latching switch with screw clamp type terminals to make fitting very easy, 4 pins, multi-type wire connection. The LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it.

. LED push button switch with water resistance rubber bootPerfect for Automotive, Motorcycle, ATV, or UTV electrical applications like lighting and accessories also works great for most DC electrical projects

. Ideal for any application requiring a water resistance on-off push button switch

. Waterproof Push Button Switch with Black Rubber Boot features 18 AWG 4 inch wire leads with 0.25 inch stripped end lengths

Silver Stainless Steel Pushbutton Switch

LED voltage: 12V

Hole size required 19mm

Specification: Latching push button switch 12v on off function with blue LED ring illuminated. Silver shell metal push button switch requires 19mm (about 3/4 inch) mounting hole size. Rating: 5A 12V DC; 5A 250V AC.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

Wire Harness: The package of the led push button switch also contains becoming wire harness for the round 19mm push button switch, the clasp design of the wire harness make it easy to install and remove.

The On/Off Switch is a spare part with the light kit, as the controller have power consumption when it is not use, it will drain about 7 mA current, so an on/off switch is very important to disconnect power when the bike was kept for long term storage.

Push Button Switch with waterproof rubber boot.Ideal for any 6-14 volt DC application requiring a waterproof on-off push button switch.Works great for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc.

Included : 1pc 12V Waterproof Push-Button On-Off Switch with 3M taple on pack,one quick connector

12V Waterproof Push-Button On-Off Switch with quick connector for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc

Easy install:- Push Button Switch with waterproof rubber boot and 3M tape on pack and quick connector

Ideal for any 12 volt DC application requiring a waterproof on-off push button switch.