Best Waterproof Car Pushbutton Switches in 2026

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Flat Round Pushbutton Switch; Rated Voltage: 250V; 1 NO; Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New 16mm Latching Switch; Black Shell Ring LED; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC； 12 volt switch

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED 19mm Latching Push Button Switch; LED voltage: 12V only, Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Mounting Hole Diameter: φ19mm

Red LED voltage: 12V only ; Switch Rating : 250V 5A

Shell Metarial:Stainless Steel (waterproof degsain)

Operating Current: 6 (A)

Operation : Push-On, Push again-Off, SPST switch

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

ON/OFF ILLUMINATED PUSH BUTTON SWITCH: 4 pin metal push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push button: 12mm.

EASY TO CONNECT & DURABLE: Latching switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSH BUTTON SWITCH: On/off push button switch with red indicator light, switch and LED ring light is separated, LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ19mm, Switch Rating: 2A / 36V DC / AC, Switch Combanation: 1NO.

Head Shape: High Round;Screw clamp type terminals to make fitting very easy.

Brand New Green Aluminium Mushroom Head Push Button Switch; Voltage: 250V, 5A. Hole size required: 0.87''/22mm

22mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles

1.Feature: This 12 volt push start button is momentary SPST design. The momentary push button switch with a black neoprene cover can prevent water, moisture and dirt.

2.Size: The height of the starter switch is 2.46 inch(without cover), the diameter of the starter button is 1.1 inch. The reqiured mounting hole of the horn button switch is 5/8 inch(0.625 inch).

3.Voltage: The rating of this waterproof engine start button is 50A 12v.

Momentary Switch With Dust Cover

Heavy Duty Waterproof Construction - 12 Volt / 50 Amp

Universal - Starter / Horn Switch

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Specifications: 12mm with LED self-locking button switch (5PCS).

How to use: press to turn on; press again to turn off. Contact configuration: 1NO.

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch；LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Momentary switch operation type: Push & Hold,ON; Release,OFF；Pre-wired design:easy to install,save your time to connect wire to the switches.

Switch Shell Color: Black;Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles；2 year warranty

Mounting Hole Size: Φ16mm, Switch Rating: 5A/250AC, Switch Combination : 1NO1NC

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ16mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Blue Aluminium High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

12V Waterproof Push-Button Switch with quick connector, press once to open, then press again to close.

Push Button Switch with waterproof rubber boot, about 20cm AWG18 wire. 3M tape on the back and easy to install quick connector.

Ideal for any 12 volt DC application that requires a waterproof on/off push button switch.

12V waterproof push-button on-off switch with 4 "(10cm) wire leads

Single pole switch; Rubber boot unscrews for flush mounting applications (requires drilling 5mm "hole)

Carbhub 12V waterproof push-button on-off switch, ideal for any application requiring a waterproof on-off push button switch

Specifications: 12mm Momentary push button switch without Led(5PCS).

How to use: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant

12V DC, 50A, SPST (single pole, single throw)

Material: Diecast Aluminum & Plastic. Contacts are pure copper for long life . Screw terminals are brass, nickel plated

Operation : Push-On, Push again-Off, SPST switch;

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

Operating Current: 3 (A); Rated thermal current: 6 (A); Contact resistance: 50 (Ω); Insulation resistance: 100 (MΩ)

product Name : Metal Push Button Switch; Metal shell,mechanical life for 500,005 cycles

Terminal Number:2 Pin screw-type terminals ; Mounting Hole Size: 16mm 5/8" ; Switch Rating: 3A/12-250V, Switch Combanation: 1NO ; Total Size : 24x 21mm / 0.95"x0.83'' (L*W)

Universal fit all 17V Car Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

[ ✔ Brand New Push Button Switch ] Rating: 5A 12V DC; Mounting Hole Size: 0.63" (16mm); Operation Type: Latching; Push it, ON; Push it again, OFF. Contact Configuration: 1NO 1NC.

[ ✔ Ring RED LED Light ] 12V LED pushbutton switch use pole-less lamp beads. Bright and comfortable lights plus a metal appearance make the on-off switch very cool. The work-life of the led light is more than 40,000 hours.

[ ✔ WATERPROOF & ASEISMATIC ] IP65 Waterproof protection can be used in a wet or dusty environment, such as boat control panels, kitchens, outdoors, etc. A high-quality aluminum alloy metal shell tolerates vibration and other harsh environmental conditions.

Product Name: 12 volt switch on off, 12V Latching Push Button ; Latching switch: Push it，ON; Push it again，OFF；Contact Configuration: 1NO1NC；Protection level: IP65, IK10;

Mounting Hole Size : Φ19mm/0.74''；LED voltage: 12V/24V DC; Rated current: 3A; Blue LED Light.

High quality metal material & IP65 waterproof protection; The switch can be used in car motorcycle boat yacht modified, computer appliance lamp switch, industrial control, access control

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Black Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Size:Waterproof Push Button Switch with Black Rubber Boot features 4 inch wire leads.Button Diameter: 12mm, Mounting Hole Diameter: 12mm

Current& voltage:3 (A）& 250 (V);Constructed with high quality copper switch contacts and is rated for up to a 10 amp usage

Material: plastic,rubber,metal;Perfect for Automotive, Motorcycle, ATV, or UTV electrical applications like lighting and accessories, most DC electrical projects

Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ16mm, Switch Rating: 2A / 36V DC / AC, Switch Combanation: 1NO.

Head Shape: High Round;Screw clamp type terminals to make fitting very easy.