Best Waterproof Pushbutton Switches in 2026

▶【Easy to Install】- Simply install the receiver between the devices to be controlled and the power supply. You can switch your lights on and off from anywhere via the remote control switch panel. Expand your lighting system freely but not affect the existing system.

▶【Strong Signal】- IP66 waterproof, thus use safely even in damp places. The effective distance between the receiver and the control panel is up to 328ft indoors and 1969ft outdoors. Strong signal through the walls and remote control your bulbs, halogen lamps, fluorescent lamps, CFLs, LED lights, fans and other electrical switchboards, etc. max. Integrated power: 1000W.

▶【Dual Switch】- With the multi-switch function you can control 1 device with 2 independent switches. You could use one switch to replace the existing switch and the other as a remote control switch or three way switch. One Thinkbee Wireless receiver can hold up to 8 control panels. Ideal to control your garden shed, garage and exterior lighting comfortably from home!

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

This Push Button Switch Warranty 3 years . If there are quality problems within 3 years, you can send us email. We will send you new ones.

Special attention: Light connect to 110V-220V ,Can light up ；Ith : 10A; Ui : 600V; Material : Plastic and Metal; Terminal Quantity : 4; Contact Type :1NC; Action Type : Momentary.

Waterproof grade ：IP65; LED Button Color : Red; Mount Hole Diameter : 22mm / 0.87"(7/8"); Fit Panel Thickness: Max 0.5cm / 0.2".

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Operating Current: 6 (A)

Operation : Push-On, Push again-Off, SPST switch

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

Mounting Hole Size : Φ19mm

LED voltage: 12V DC ;Blue LED Light

Shell Metarial:ZN-AL ALLOY (waterproof design)

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

ON/OFF ILLUMINATED PUSHBUTTON SWITCH: 4 pin metal self-locking push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push-button: 12mm.

EASY TO CONNECT & DURABLE: Latching pushbutton switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSHBUTTON SWITCH: ON/OFFpush button switch with blue indicator light, switch and LED ring light is separated, the LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Momentary Switch With Dust Cover

Heavy Duty Waterproof Construction - 12 Volt / 50 Amp

Universal - Starter / Horn Switch

Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ19mm, Switch Rating: 2A / 36V DC / AC, Switch Combanation: 1NO.

Head Shape: High Round;Screw clamp type terminals to make fitting very easy.

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

1.Feature: This 12 volt push start button is momentary SPST design. The momentary push button switch with a black neoprene cover can prevent water, moisture and dirt.

2.Size: The height of the starter switch is 2.46 inch(without cover), the diameter of the starter button is 1.1 inch. The reqiured mounting hole of the horn button switch is 5/8 inch(0.625 inch).

3.Voltage: The rating of this waterproof engine start button is 50A 12v.

Brand New Red Aluminium Mushroom Head Push Button Switch; Voltage: 250V, 5A. Hole size required: 0.87''/22mm

22mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles

Specifications: 12mm with LED self-locking button switch (5PCS).

How to use: press to turn on; press again to turn off. Contact configuration: 1NO.

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Momentary switch operation type: Push & Hold,ON; Release,OFF；Pre-wired design:easy to install,save your time to connect wire to the switches.

Switch Shell Color: Black;Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles；2 year warranty

Mounting Hole Size: Φ16mm, Switch Rating: 5A/250AC, Switch Combination : 1NO1NC

★ 2 sets 16mm push button Blue LED light switch with IP67 & IK10 Protection, can be used in wet or dusty environment.

★ This on off ac switches come with 5 pins wire terminal with socket plug, don’t need soldering, make your work simple and easy! The LED light can be always on or only on when device working, it depends on how you connect the wire.

★ On/off push button switch type: Momentary push button and Latching push button for your choice. Momentary button switch operation method: press and hold the button –>ON, Release the button –> OFF. Latching button switch operation method: press the button–>ON, press the button again–> OFF.

12V Waterproof Push-Button Switch with quick connector, press once to open, then press again to close.

Push Button Switch with waterproof rubber boot, about 20cm AWG18 wire. 3M tape on the back and easy to install quick connector.

Ideal for any 12 volt DC application that requires a waterproof on/off push button switch.

Easy to Install: Silver Stainless Steel Flat Round Momentary Pushbutton Switch with Blue light. Push & Hold, ON; Release, OFF. Hole size required: 0.74''/19mm.

Blue Push Button Switch: The led button switch and LED light are separated, the LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it.

Built to Last: Made of high-quality stainless steel, durable and anti-rust, the lifetime can up to 500,000 cycles. IP65 waterproof can be used in a wet or dusty environment.

Operation : Push-On, Push again-Off, SPST switch;

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

Operating Current: 3 (A); Rated thermal current: 6 (A); Contact resistance: 50 (Ω); Insulation resistance: 100 (MΩ)

Momentary Type: Push & Hold - ON, Release – OFF

Mounting Hole Size: Φ12mm, Switch Rating: 2A/36V DC/AC, Switch Contacts: 1NO

Easy to Install: Screw clamp type terminals, don’t need to solder

Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant

12V DC, 50A, SPST (single pole, single throw)

Material: Diecast Aluminum & Plastic. Contacts are pure copper for long life . Screw terminals are brass, nickel plated

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

2 PCS Brand New Pre-wired 12mm Black Aluminium Alloy LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 0.5''/12mm

12mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Mounting hole size: 19mm; Head Diameter: 22mm

Latching switch: Push-ON; Push it again-OFF

Shell Metarial: Zinc aluminum alloy(waterproof and dustproof degsain)

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Blue Aluminium High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Specifications: 12mm Momentary push button switch without Led(5PCS).

How to use: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

Mounting Hole Size: Φ16mm (5/8 Inch), Switch Combination : 1NO1NC.

Operation Type : Latching/ Self-Locking [Push it - ON, push it again - OFF].

Ring LED can be on all the time or only when switch is on which depends on how you wire it.

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ16mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]