Best Brass Pushbutton Switches in 2026

Rated Voltage: AC 110V 5A/220V 3A; Hole size required: 0.74''/19mm

19mm flat round latching push button switch: Press, ON; Press again, OFF, Contact Configuration: 1NO 1NC

Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED 19mm Latching Push Button Switch; LED voltage: 12V only, Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 0.63''/16mm

16mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Latching switch: Push it, ON; Push it again, OFF

With a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Mounting Hole Size : Φ19mm

LED voltage: 12V DC ;Blue LED Light

Shell Metarial:ZN-AL ALLOY (waterproof design)

ON/OFF ILLUMINATED PUSH BUTTON SWITCH: 4 pin metal push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push button: 12mm.

EASY TO CONNECT & DURABLE: Latching switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSH BUTTON SWITCH: On/off push button switch with red indicator light, switch and LED ring light is separated, LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

Momentary switch operation type: Push & Hold,ON; Release,OFF；Pre-wired design:easy to install,save your time to connect wire to the switches.

Switch Shell Color: Black;Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles；2 year warranty

Mounting Hole Size: Φ16mm, Switch Rating: 5A/250AC, Switch Combination : 1NO1NC

Latching switch (ON/OFF switch): Push it, ON; Push it again, OFF

The newer model of U16C2, with a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Mounting hole size: 19mm; Head Diameter: 22mm

Latching switch: Push-ON; Push it again-OFF

Shell Metarial: Zinc aluminum alloy(waterproof and dustproof degsain)

Mounting Hole diameter: 16mm

Type: Momentary, 1NO 1NC

Ambient Temperature: -25°C to + 55°C

Product Name: 12 volt switch on off, 12V Latching Push Button ; Latching switch: Push it，ON; Push it again，OFF；Contact Configuration: 1NO1NC；Protection level: IP65, IK10;

Mounting Hole Size : Φ19mm/0.74''；LED voltage: 12V/24V DC; Rated current: 3A; Blue LED Light.

High quality metal material & IP65 waterproof protection; The switch can be used in car motorcycle boat yacht modified, computer appliance lamp switch, industrial control, access control

Mounting Hole diameter: 16mm

Type: Momentary, 1NO 1NC

Working Voltage: 5A / 250VAC

Self-Locking Version: Latching push button switch 12V with ON OFF SPDT (1NC 1NO) latch function flat button design. The panel mounting hole dia. of this metal push button switch is 22mm (about 7/8 inch) with 5A 12VDC rating.

12 Volt Blue LED: The 22mm push button switch with 12V blue LED ring Halo illuminated design, which can help you easily locate the 12v switch when you are surrounded in the dark.

Wiring Harness: The 5 pin push button switch contains wiring harness, It's with 5 wires and 0.6 inch length, the clasp design of the wire harness make it easy to install and remove.

Our Push Button Switch through UL certification and CE certification.

LED voltage: 110V ~120V(AC/DC), Head Shape:High Round Momentary Push Button, Hole size required: 7/8''/22mm. LED Life:40000 hours.

22mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO1NC(SPDT).

【Wide Application】Universal for Electromagnetic furnace, Water dispenser, buses, boats, marine, trailers，kitchen appliance etc.

【DIY As You Like】Black Boat Rocker Switch, 3 terminals ON/OFF/ON switch, , longer life for use.

【Product Basic Parameters】AC250V/10A 125V/15A; Size: 23mm x 23mm x 26mm(LxWxH)

Latching switch: Push it, ON; Push it again, OFF. 100% Brand new and high quality, mechanical life for 500,000 cycles. Degree of protection: IP67, IK10

Mounting hole size: 19mm; Head Diameter: 22mm; Head shape: Flat; Enclosure material: Aluminum Alloy

Switch rating: 5A/250V AC, 5A/30V DC; LED rating: 15mA, AC/DC 12V; The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it.

[Working Mode]: Push and Release, button locked, Normally Open Circuit ON. Push and Release again, button recovered, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF Self-Locking. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:16mm. Mounting hole diameter should be at least 16mm(0.63") and Smaller than 16.2mm(0.64")

INDUSTRIAL QUALITY – Industrial quality mushroom head type button that serves as an emergency stop pushbutton or E-Stop, a fail-safe control power switch that provides both safety for the machinery and for the person using it. Comes with a spring return or a stay-put action type

HIGH VISIBILITY – Highly visible in color, size and shape with a mushroom head design to provide an easy and fast access to it, easy to operate in emergency situations

VERSATILE – Useful for different kinds of industrial installations. Widely used for control of electronic and/or magnetic starter, contactor and relay, or other similar circuit. Can be used in mount panels, stations, machines and consoles of textile equipment and operating rooms or distribution boxes for ships, airplanes or cities

Type: 22mm 7/8" Silver shell Green light Self-Locking Push Button Switch ON/OFF; Connector type: SPDT,2 position 6 pin ; Rated Voltage & Current : 10A 12-24V DC.

Material:Enclosure Stainless Steel; The base adopts flame retardant PA66; Protection level IP65 can be used in wet or dusty enviroment, With jumper terminals for easy installation and modification.

Wide application:Suitable for boats, trucks, cars, electric motorcycles, RVs, Also very suitable for DIY tasks etc.

Our Push Button Switch through UL certification and CE certification.Waterproof IP67 can be used outsides or marine applications such as ships. Stainless steel 304 shell is sturdy and durable.

Rated current 5A 250V, Stainless Steel Ring LED, Hole size required: 7/8''/22mm.,LED light:12V (AC/DC), Mechanical life: 1,000,000 cycles,Electrical life: 100,000 cycles.

22mm Latching Push Button Switch: Latching switch: Push it =ON; Push it again =OFF, Contact Configuration: 1NO1NC(SPDT), 6 pins.

[Working Mode]: Push and Release, button locked, Normally Open Circuit ON. Push and Release again, button recovered, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF Self-Locking. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:19mm. Mounting hole diameter should be at least 19mm(0.75”) and Smaller than 19.2mm(0.76”).

Price For: Each Contact Configuration: SPDT Switch Operation: (On) Contact Voltage AC Nom: 125V Contact Voltage DC Nom: 28V Contact Current Max: 6A Actuator / Cap Color: Black Series: MPG RoHS Compliant: Yes

40A Power Relay,5-Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability

The Wires Are Made By Heavy-Duty Material And Have Better Conductivity For The Main Contact And Pre-Wired With 7" Pigtail Leads

Excellent Construction:Interlocking Design Relay Socket Harness Base For Easy Cable Management & Organization.

SPDT momentary push button switches, press it - on, release it - off.

Contact type: SPDT; Rating: AC 250V / 2A, AC 120V / 5A

Mounting Type: panel mount; Terminal Number: 3, Mounting Thread Diameter : 6 mm / 0.24"

This is a perfect choice if you are in need of a rugged push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated Green LED Ring.

It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off functions with cable length 1m / 3.3ft.

These latched buttons are rated up to 5A and 250V AC while the LED is rated for 3-6V.

SPST

OFF/(ON)

Momentary

Pole and Throw: SPDT; Oeperation Type: Latching(Self Locking); Total Size:28 x 50mm / 1.1" x 1.97"(Max.Dia x L)

Product Name: Emergency Stop Push Button Switch; Country of Manufacture: CHINA; Material: Metal, Electronic Parts

Net Weight: 51g; Package Content: 1 x Emergency Stop Push Button Switch; Terminal Quantity: 3

[Working Mode]: Push and HOLD, Normally Open Circuit ON. Release, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:16mm. Mounting hole diameter should be at least 16mm(0.63") and Smaller than 16.2mm(0.64").

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New 16mm Latching Switch; Silver Stainless Steel Ring LED; LED voltage: 110V, Hole size required: 0.63''/16mm

Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC； 110 volt switch

Specifications: 19mm Blue LED Horn Momentary Push Button Switch with Wire Socket Plug.

How to use: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).

Mounting hole size: 0.74" /19mm, please check the size carefully before purchasing.