Best Ip65 Car Pushbutton Switches in 2026

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Latching switch: Push it, ON; Push it again, OFF

Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

[Shiny design]: Small and cute plus the design of Bling, it looks dazzling like a gem, very attractive, if you install it in your car, it will become a landscape in the car.

[High Quality]: Made of durable rust-free silver chrome metal, very durable and will not have an unpleasant smell, cute and good quality.

[Easy to install]: Each crystal ring has tape, which can provide you with convenient installation. Just peel off one side of the tape and stick it to the halo, then peel off the other side of the tape and fasten it tightly to the button on.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch；LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Specifications: 12mm with LED self-locking button switch (5PCS).

How to use: press to turn on; press again to turn off. Contact configuration: 1NO.

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

❤【UPGRADED VERSION SHINY IGNITION BUTTON DECOR】Hinestone ring decors can be used for car engine start and stop push buttons, radio switches, stick shift etc.

❤ 【HIGH QUALITY】Beautifully made with sturdy and durable rust-free silver chrome metal and embedded with bright sparkling crystal rhinestones.

❤ 【EASY TO INSTALL】Eeach crystal ring has an 3M adhesive tape, which can provide you convenience for the process of installation, just peel off a side of tape and stick to bling ring, then peel the other side of tape and stick to button tightly.

Easy to Install: Silver Stainless Steel Flat Round Momentary Pushbutton Switch with Blue light. Push & Hold, ON; Release, OFF. Hole size required: 0.74''/19mm.

Blue Push Button Switch: The led button switch and LED light are separated, the LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it.

Built to Last: Made of high-quality stainless steel, durable and anti-rust, the lifetime can up to 500,000 cycles. IP65 waterproof can be used in a wet or dusty environment.

▶ Momentary Starter Ignition Switch For Automotive, Marine, Truck, Boat, RV ATV, and much more applications.

▶ Mounts in a 5/8" Diameter Hole.

▶ Silver Contacts Rated for 50 Amps at 12 Volts.

【Auto Start Stop Button Widely used】- The high-quality start stop engine push button cover fits for about 90% vehicles.

【Strong Protection】- Decorate the engine switch button and to prevent scratches and unintentional touches by children, it will become a very cool decoration for the car!

【Unique Design】- This engine start push button cover changes the ordinary interior and add cool design to your car, making it high class, unique and different from any other.

1. RINGS SPECIFICATIONS: inner diameter: 1.2''; outer diameter: 1.5''; thickness: 0.12''; it's the size for most automobiles. Note: Confirm whether it applies to your automobile as per the dimensions.

2. HIGH QUALITY: 35 sparkling crystals are embedded on the silver stainless steel ring by using firm adhesive tape. The decorative ring with crystals is sparking and gorgeous.

3. STANDARD CONIGURATION: It's suitable for keys, ignition buttons, auto knobs, buttons, steering wheels, and shift levers (For some vehicle models, more than one decorative ring can be used).

Includes Black Neoprene Cap for Extra Protection Against Dirt and Moisture

Mounts in a 5/8" Diameter Hole in any Orientation

Silver Contacts Rated for 60 Amps at 12 Volts

High quality Metal wire drawing face plate, durable; Universal for 12V Car Auto or Power Speediness & Racing Cars.

LED indication light.

Buttons and Switches: 1 x ON-OFF toggle switch + 1 x red engine start button + 3 x toggle switches for additional use; Come with the Relay to control the buttons of this item.

STARELO Latching Push Button Switch adopts SPST design and is made of stainless steel. The compact and high-quality products not only bring you convenience, but also guarantee the service life, which is very suitable for your car.

Product Features: The compact appearance makes more space for your car, and it is easy to install and easy to use. It is worth mentioning that this product has IP65 waterproof protection, which extends the service life to a greater extent.:

How to use: Just press it once, and your switch will be turned on. There will be no button bounce on this self-locking switch; press it again to turn off the switch.

Latching Type: Push it, ON; Push it again, OFF

Easy to install,Screw clamp type terminals, don't need to solder,the installation method is easy to understand

IP67 Waterproof & IK10 Protection: Rustproof, can be used in wet or dusty environment

Momentary Type: Push and Hold,ON; Release,OFF

Easy to install,Screw clamp type terminals, don't need to solder,the installation method is easy to understand

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Latching maintained pushbutton power switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for auxiliary LED accent lights on truck beds, boat trims, sailboat masts, car underbodies, and motorcycles

This switch is constructed of non-oxidizing, corrosion resistant stainless steel. It has a protection rating of IP67 waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage

The switch and LED are separate. The LED can be on all the time or only when the switch is ON, depending on how you wire it

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12-24VDC only, Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.

Product name: Waterproof silver stainless steel led light bar blue LED push button switch.

Product parameter: 10A 12V 24VDC, LED voltage: only 12V,Electrical life: 200 thousand times.

Product size: Hole size required: 19mm/0.74''. Plug size: 170mm x 19.6mm x 17.2mm/6.7"*0.77"*0.67"(L*W*H).

[Working Mode]: Push and HOLD, Circuit conducted. Release, Circuit break off. Contact Configuration: Normally Open ON/OFF. Used in Single circuit.

[Contact Rated]: 250V AC 5A; 12V/36V DC 2A.

[Mounting]: Diameter size:22mm. Mounting hole diameter should be at least 22mm(0.87") and Smaller than 22.2mm(0.88"). Max panel thickness 5mm(0.2")

¡¾ LED Light Push Button Switch ¡¿-- LED light push button is built on it's own circuit , lighted when on, or could be wired to make it lighted alternate. Contact Configuration: 1NO; Screw Thread Width: 12mm / 0.47"; Dimension: 0.7 x 2.2cm / 0.28" x 0.87"

¡¾ For Various Electric Equipment ¡¿-- Latching switches are used for various additional electric equipment, inside & outside the car. LED Voltage: Red LED - 2V; Green, blue, white LED - 3V. When the voltage is higher than 2V or 3V, you need to add external resistor

¡¾ Premium Quality & Easy Installation ¡¿-- LED push button is made of premium brass plated material, high-grade appearance, nice touch feeling, and abrasion resistant, to ensure maximum durability for long lasting usageHole size required is 12mm. Easy to install, screw clamp type terminals to make fitting very easy, no cutting, or drilling required. Copper plating silver pin terminals for good conductive properties

【Preferred Material】Car Push Button Switch is made of high quality materials a, which is explosion-proof and shock-proof. High precision brass silver-plating, stable electrical performance. Quality stainless steel material, waterproof and rustproof Momentary Push Button Switch.

【Safety Tool】Car Push Button Switch is built-in medical waterproof ring, IP 65 professional waterproof, safe and reliable.

【Great Applicable】8mm mini momentary push button can be used for horn, power, start switch of your vehicle.

[Working Mode]: Push and HOLD, Normally Open Circuit ON. Release, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:19mm. Mounting hole diameter should be at least 19mm(0.75”) and Smaller than 19.2mm(0.76”).

[Working Mode]: Push and HOLD, Normally Open Circuit ON. Release, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:16mm. Mounting hole diameter should be at least 16mm(0.63") and Smaller than 16.2mm(0.64").

【Applicable Scope】Universal Design. This brand new set of metal push-button switch for circuit control in electromagnetic starter, contactor, relay and other electric circuits.

【High Quality Material】100% Brand new and High quality (Left Side and Right Side). These Motorcycle On Off Switch are made from premium PVC,ABS for long durability. Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.

【Perfect application】 Momentary type, High precision mechanism design offers acute operation and long service life.100% test before shipping to ensure product safety, stability and durability. And it is waterproof, shockproof, and durable. This momentary switch will be on when you push button, and it will be off when you undo button.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH

Brand New Silver Stainless Steel LED Light Bar Logo Ring LED Pushbutton Switch; LED voltage: 12V only, 10A For 12V-24VDC. Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO