Best Ring Car Pushbutton Switches in 2026

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED 19mm Latching Push Button Switch; LED voltage: 12V only, Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New 16mm Latching Switch; Black Shell Ring LED; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC； 12 volt switch

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

[Shiny design]: Small and cute plus the design of Bling, it looks dazzling like a gem, very attractive, if you install it in your car, it will become a landscape in the car.

[High Quality]: Made of durable rust-free silver chrome metal, very durable and will not have an unpleasant smell, cute and good quality.

[Easy to install]: Each crystal ring has tape, which can provide you with convenient installation. Just peel off one side of the tape and stick it to the halo, then peel off the other side of the tape and fasten it tightly to the button on.

ON/OFF ILLUMINATED PUSHBUTTON SWITCH: 4 pin metal self-locking push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push-button: 12mm.

EASY TO CONNECT & DURABLE: Latching pushbutton switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSHBUTTON SWITCH: ON/OFFpush button switch with blue indicator light, switch and LED ring light is separated, the LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch；LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

❤【UPGRADED VERSION SHINY IGNITION BUTTON DECOR】Hinestone ring decors can be used for car engine start and stop push buttons, radio switches, stick shift etc.

❤ 【HIGH QUALITY】Beautifully made with sturdy and durable rust-free silver chrome metal and embedded with bright sparkling crystal rhinestones.

❤ 【EASY TO INSTALL】Eeach crystal ring has an 3M adhesive tape, which can provide you convenience for the process of installation, just peel off a side of tape and stick to bling ring, then peel the other side of tape and stick to button tightly.

【Auto Start Stop Button Widely used】- The high-quality start stop engine push button cover fits for about 90% vehicles.

【Strong Protection】- Decorate the engine switch button and to prevent scratches and unintentional touches by children, it will become a very cool decoration for the car!

【Unique Design】- This engine start push button cover changes the ordinary interior and add cool design to your car, making it high class, unique and different from any other.

1. RINGS SPECIFICATIONS: inner diameter: 1.2''; outer diameter: 1.5''; thickness: 0.12''; it's the size for most automobiles. Note: Confirm whether it applies to your automobile as per the dimensions.

2. HIGH QUALITY: 35 sparkling crystals are embedded on the silver stainless steel ring by using firm adhesive tape. The decorative ring with crystals is sparking and gorgeous.

3. STANDARD CONIGURATION: It's suitable for keys, ignition buttons, auto knobs, buttons, steering wheels, and shift levers (For some vehicle models, more than one decorative ring can be used).

Momentary (ON)/OFF switching. Press and hold for ON, release for OFF.

Blue angel eye LED ring illuminates when pressed

Pushbutton rated 3 amps at 12vdc

Latching switch: Push it, ON; Push it again, OFF

The newer model of U16C2, with a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

✅【Tybasthe Original Design】Tybathe push to start button cover adopts a new automatic lifting structure, built-in high-performance spring device, and the opening & closing response is more sensitive. The ultra-stable structure counteracts car vibrations without making noise. Tests have proved that it can be opened and closed more than 1,000,000 times and still remain normal.

✅【Professional Protection】By simulating hundreds of daily use situations, Tybasthe push start button cover can effectively prevent the start button from being scratched by other items, making the button more cool. In addition, it can also prevent children or pets from touching the start button by mistake, improving driving safety.

✅【Superb Craftsmanship】The start button cover is strictly made of high quality zinc alloy, after up to 12 times of complex industrial processing, with excellent characteristics of hardness and scratch resistance, rust resistance, water resistance, non-fading and non-deformation, ensuring that you can use it for a long time.

STARELO Latching Push Button Switch adopts SPST design and is made of stainless steel. The compact and high-quality products not only bring you convenience, but also guarantee the service life, which is very suitable for your car.

Product Features: The compact appearance makes more space for your car, and it is easy to install and easy to use. It is worth mentioning that this product has IP65 waterproof protection, which extends the service life to a greater extent.:

How to use: Just press it once, and your switch will be turned on. There will be no button bounce on this self-locking switch; press it again to turn off the switch.

Product name: High Domed Waterproof black stainless steel rear lights blue LED push button switch.

Product parameter: 10A 12V 24VDC, LED voltage: only 12V,Electrical life: 200 thousand times.

Product size: Hole size required: 19mm/0.74''. Plug size: 170mm x 19.6mm x 17.2mm/6.7"*0.77"*0.67"(L*W*H).

Latching Push Button Switch: 12v push button switch 19mm with wire socket, 4 pin (2 switch pins and 2 LED pins).

Function: Push button switch 12v, you can choose suitable wiring methods according to your needs. Self locking ON/OFF Design: Press - switch ON; Press Again - switch OFF.

Rating: 20A 12 Volt DC, different with other 12v push button switch, this latching switch is a heavy duty waterproof push button switch.

Latching maintained pushbutton power switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for auxiliary LED accent lights on truck beds, boat trims, sailboat masts, car underbodies, and motorcycles

This switch is constructed of non-oxidizing, corrosion resistant stainless steel. It has a protection rating of IP67 waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage

The switch and LED are separate. The LED can be on all the time or only when the switch is ON, depending on how you wire it

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12-24VDC only, Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.

Product name: Waterproof silver stainless steel led light bar blue LED push button switch.

Product parameter: 10A 12V 24VDC, LED voltage: only 12V,Electrical life: 200 thousand times.

Product size: Hole size required: 19mm/0.74''. Plug size: 170mm x 19.6mm x 17.2mm/6.7"*0.77"*0.67"(L*W*H).

Momentary Button: Black Stainless Steel Flat Round Momentary Pushbutton Switch with Blue light. Push & Hold, ON; Release, OFF.

Easy to Install: With Solder Terminals. This stainless steel metal push button requires a mounting hole size: 0.74inch (19mm). IP65 waterproof can be used in a wet or dusty environment.

Ring Blue LED Light: The momentary button switch and LED light are separated, the LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it.

【Preferred Material】Car Push Button Switch is made of high quality materials a, which is explosion-proof and shock-proof. High precision brass silver-plating, stable electrical performance. Quality stainless steel material, waterproof and rustproof Momentary Push Button Switch.

【Safety Tool】Car Push Button Switch is built-in medical waterproof ring, IP 65 professional waterproof, safe and reliable.

【Great Applicable】8mm mini momentary push button can be used for horn, power, start switch of your vehicle.

[Working Mode]: Push and HOLD, Normally Open Circuit ON. Release, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:19mm. Mounting hole diameter should be at least 19mm(0.75”) and Smaller than 19.2mm(0.76”).

Specifications: You will get a Brand New Red Aluminium Mushroom Head Push Button Switch.The rated voltage of this switch is: 250V AC, rated current: 5A, required aperture: 0.63''/16mm.

Function: Mushroom Momentary Push Button Switch.The switch is compact and operates quickly and gently.

Design: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).Contact Configuration: 1NO.

【Latching Switch】Push-ON; Push it again-OFF

【Brand New Pushbutton Switch】16mm Black Aluminium Alloy Ring LED Latching Pushbutton Switch ; LED voltage: 12V-24V

【IP66 Waterproof Degree】High quality metal material and can be used in wet or dusty enviroment.

[Working Mode]: Push and HOLD, Normally Open Circuit ON. Release, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF. Used in Single circuit switch or DUAL circuit change-over.

[LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.

[Mounting]: Diameter size:16mm. Mounting hole diameter should be at least 16mm(0.63") and Smaller than 16.2mm(0.64").

Specifications: PBS-33B(SD-211), brand new Round Push Button Switch - pack of six.There are five colors for you to choose from.

Function: The input voltage of this classic round head button switch is 3A 125V AC. After pressing and holding the switch, the device immediately enters the working state; after releasing the switch, the device immediately stops running.

Design: switch is 2pin, single pole single throw design, with 200mm/7.87” pre-soldered wire,mounting hole size is 12mm/0.5inch.

Package Contents: Value Pack - 2 Of American Bully-Matt Black Metal Start Button Protection Cover.

Suitable: Various Usage Scenarios, Unique Designed, For Decorate & Protect Most Vehicles Start Button, You Can Also Use This For Cover The Door Peephole Privacy Cover, Security View Cover, Hidden Push Button Switch, USB Cover, Power Button Cover, etc. Or Any Hole That Within 1.125" Diameter.

Size (Approx.): The Button Cover Base Outer Diameter Is 1.65", The Inner Diameter Is 1.125", Front 1.4"x1.69", Thickness 1.26", Flip 90°. Please Confirm The Size Of The Vehicles Start Button Outer Diameter Is Not Bigger Than 1.5", Not Smaller Than 1.125. Not Design For The Big Key.

✔Universal Style - This rotating engine start stop button cover fits 95% of all car models. Ignition smaller than 1.14 inches (29mm) can be fit to install. Please check the size before purchasing to make sure this product fits your car.

✔High Quality Alloy - This engine start stop ring button cover is made of high quality zinc alloy, beautifully made with a good glossy finish and very smooth rotation, it provides a beautiful decoration for your ignition.

✔Sports Racing - This rotating button cover is very cool and makes your car interior look less ordinary and more sports racing style. It also fully protects your engine start stop button from scratches. It is a product that combines practicality and decoration in one.

✔Applicable Models - The engine start stop button cover compatible with Land Rover Discovery Sport 5 Range Rover Jaguar XJ XF XE F-Type F-Pace XJR XFR original car data. Please confirm your model before purchasing to confirm that the product is suitable for your car.

✔Preferred Material - Made of high-quality aluminum alloy material, wear-resistant, scratch-resistant and dust-proof. Not only can get upgraded protection, upgrade the grade, but also can enjoy the exquisite decoration in the car.

✔1:1 Design - This product is tailor-made for your car, providing high-end and fashionable decoration style, changing the ordinary interior design of the car, adding unique colors to your car, making it more upscale, unique and cdistinctive. It can be highly consistent with the interior of your car, it can cover existing scratches and prevent your car from other scratches. it can cover the existing scratches and prevent your car from other scratches.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH

Brand New Silver Stainless Steel LED Light Bar Logo Ring LED Pushbutton Switch; LED voltage: 12V only, 10A For 12V-24VDC. Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO