Best Automotive Replacement Hall Effect Switches in 2026

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights

PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark

STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability

Multi Functional Switch Panel: Product integrated with dual USB port, digital voltmeter, 12V outlet, waterproof board and 5 on / off rocker switches, this 12V/24V electrical panel can meet your various needs

Safety Protection: Real time LED voltmeter shows the status of the voltage. Pre-wire design with 15A fuse providing you with an overload, over-current and short circuit protection.

Wide Application: This switch is suitable for 12V-24V Systems and widely applicable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine, boat, yacht, airplane, etc. Convenient to install with pre-wired and four assemble screws

Laser etched backlit with two LED lights

Single pole double throw on-off-on switch

All symbols are laser etched directly onto the switch face to ensure long image life

Perfect Design: Designed to connect and disconnect a DC12V 20A electrical circuit at will, SPST: ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. Fluorescent lamps will be lighted up when the switch is turned on

Safety Protection: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety

Easy Installation: Round on-off switch is easy to install, which is just direct setup, and no additional work required, our switch comes with a keyhole slot to prevent unwanted rotation

4 Gang rocker switch aluminum panel with DIY stickers and night glow stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12V and 24V vehicles.

Wide Application:Universal for all cars,RVs,Cans, Motorcycles, buses, boats,trailers,jeeps,UTV etc.

Panel Size:The aluminum panel dimension Length x Width x High(5"x2.75''x2.6'')

4 in 1 DIY Toggle Switch Panel: Dual USB Socket + Voltmeter + 12V Outlet + ON/OFF Toggle Switch. It’s convenient for installing and operating. Also detachable to replace other charger sockets or anything else that fits.

Real Time LED Voltmeter: The LED voltmeter shows accurate voltage status, reminds you whether the voltage is at a normal level, more secure for driving. Also allows quick and easy usage in the darkness. Your charging needs.

SAFETY: The wires was built-in 10A Fuse for over-load protection. It can charge safely, without risk of overheating or damaging devices.

Quality Assurance: The switch box is made of durable aluminum housing, it is wear-resistant, waterproof and dustproof. The surface is designed with the frosting, which is not easy to scratch. With adjustable mounting bracket, you can adjust the suitable angle according to your needs, seamlessly blend into your vehicle's interior

Adaptable power: From massive off-road lighting setups to heavy-hitting police warning lights, the switch box is the perfect universal solution for all DC power distribution jobs. Two 40 amp rated circuit with two 40 AMP fuses for short circuit protection, overload protection, reverse polarity protection, more secure to use

Simplified wiring: each circuit has one power and ground wire and four color-coded accessory wires, which is easy for you to connect the wire to the power supply and accessories separately

Multi-Function designed: This Switch Panel is integrated with 4 Rocker switches and QC3.0 dual USB charger with Voltmeter. Suitable for most 12V-24V DC cars, UTVs/ATVs, trucks, trailers, RVs, caravans, buses, marine boats, yachts etc..Material:Plastic,Metal

Efficient Charge: Dual usb charger enable you charge two devices simultaneously at full speed . It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.

LED Voltage Display: The Voltmeter is builted in the center of the USB charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles.

【High quality switches】Rocker Switch Made of strengthened ABS and anti-retardant materials, , 100% Waterproof Dust-tight Shockproof and Debris-proof, 10000 times pressing test, switch Sturdy flexible and durable.

【Compatible】7 Pin DPDT ON-Off-ON switch, rated at 12v 20Amp and 24v 10Amp, available for most electrical equipment, available for upgrading most wiring harness to control Led Light, Led Work Lights, Fog Lamps, Indoor lights, Dome light, Decorate Lights, Headlights, Taillights and Auxiliary Lamps & More.

【Easy to install】Panel mounting hole size of the switch: 1.46" (37.2 mm) x 0.83" (21.2 mm), mounting hole size available for most vehicles boat install or replace, It can be directly installed or replaced on the original panel, It is easy and simple to set it up.

Quality Assurance: The switch box is made of durable aluminum housing, it is wear-resistant, waterproof and dustproof. The surface is designed with the frosting, which is not easy to scratch. With adjustable mounting bracket, you can adjust the suitable angle according to your needs, seamlessly blend into your vehicle's interior

Adaptable power: From massive off-road lighting setups to heavy-hitting police warning lights, the switch box is the perfect universal solution for all DC power distribution jobs. 40 amp rated circuit with a 40 AMP fuses for short circuit protection, overload protection, reverse polarity protection, more secure to use

Simplified wiring: A power and ground wire and four color-coded accessory wires, which is easy for you to connect the wire to the power supply and accessories separately

Product name: Push button switch;Color: Black

Voltage & Current: DC 5A/24V 10A/12V (Use at less than 120 watts)

Switch head size: 1.66'' X 1.1'' X 1'';Wire Length: 11.8''

Push Button Switch: The ON-OFF rocker switch with SPST design (single pole single Throw) is manufactured to fit in the OEM switch blank for your cars. It come with a small pigtail that plugs into the back of the switch for better installation.

Cool LED illumination: built-in two premium LEDs Emits soft light to illuminate the patterns on the switch, easy for you to find the switch in the dark.

Wide Application: The switch is perfect for controlling Rear Lights, Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. The switch is rated for 3 amps, you would need a relay if your lights are rated higher.

Product Information: Product name: Surface-mounted Magnetic Door Switch, Type: MC-31, Color: White, Material: Plastic

Specification: Contact Type: NC, Hole Dia.: 5.8mm, Actuation Distance: 8mm±18mm

Sizes: 64*12.*12mm and 64*20*12mm（L * W * H）

Non-contact sensor design using Hall Effect integrated circuitry eliminates the high failure contact wiper design of the original equipment pedal

Direct replacement for a proper fit every time

High quality materials ensure durability

Push Button Switch: The ON-OFF rocker switch with SPST design (single pole single Throw) is manufactured to fit in the OEM switch blank for your cars. It come with a small pigtail that plugs into the back of the switch for better installation.

Cool LED illumination: built-in two premium LEDs Emits soft light to illuminate the patterns on the switch, easy for you to find the switch in the dark.

Wide Application: The switch is perfect for controlling Fog Lights, Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. The switch is rated for 3 amps, you would need a relay if your lights are rated higher.

✅Premium Quality, Direct Fit, 1-3 Days Delivery

✅Compatibility: 2008 2009 2010 2011 2012 Peterbilt 384 10.8L 10834CC 661Cu. In. l6 DIESEL Turbocharged; See below for the full vehicle list.

✅Enhance Performance. Easy Installation. High Reliability.

Hot Light Thermal Temp Switch Sensor fits for Polaris 1997-2003 Scrambler 500 / 1999-2004 Ranger 500 / 1999-2002 Magnum 500 / 2003-2007 Predator 500 / 2006-2007 Outlaw 500

Switch Sensor Complatiple with 2001-2004 Sportsman 400 /2008-2014 Sportsman 400 HO / 1996-98 Magnum 425 / 1998-99 Big Boss 500 6x6

Complatiple with Polaris 2003 2004 Sportsman 600 / 2002-2004 Sportsman 700 1999-01 Worker 500 / 2000-2002 Xpedition 325/425 /1997 Xplorer 500

POWER AND A SIGNAL INDICATOR This effect sensor switch of Hall Effect Sensor has a power indicator and a signal indicator.

3144E SWITCH TYPE SENSOR Counting Sensor Magnetic Detector uses 3144E switch type sensor for stable performance

MAGNETIC FIELD When the sensor senses a magnetic field, the digital output is low and the signal light is on; if no magnetic field is sensed, the digital output of Counting Sensor Magnetic Detector is high and the signal is not lit.

MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights

PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark

STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability

Fitment Notes: without Police Package,

Designed With The Latest Software And Manufactured With Modern Tooling

Direct Fit Replacement