Best Linear Sensors in 2026

5PCS ADI TMP36GZ temperature sensors,High accuracy solid state temperature sensor.

Voltage Input: 2.7V to 5.5V DC,Output range: 0.1V (-40°C) to 2.0V (150°C)

Temperature range: -40°C to 150°C / -40F to 302F 2°C accuracy

100PSI PRESSURE TRANSDUCER - Convert the physical parameters of the gas , liquid and other physical parameters of the pressure sensor into a standard electrical signal.

WIDE APPLICATION - Plug and play for fuel, oil, air, water pressure inputs, can be used in oil tank, gas tank, etc.

PREMIUM MATERIAL - Made from top grade 316 stainless steel & high temperature resistant plastic, endure all kinds of working environment.

Warranty:1 Year , Heated

Pin Count:3-pin

Other Part Number:38800-HN2-000,38800-HN2-005,38800-HN2-015

A1302 Ratiometric Linear Hall Effect Sensors Chip

10Pcs A1302 Ratiometric Linear Hall Effect Sensors Chip

Important: Carefully check fitment of Amazon, list description and part pictures. Must make sure our part pictures are same as yours. Because The first two could not identify vehicle months & engine difference. If pictures (body,socket,plugs) are same, certainly the part will fit your car. Or If you have part no., please make sure the part no. is among our Interchange part number list. If yes, the part usually fits your car. So the pictures or part no. are more important.

1 year warranty

Guaranteed genuine quality Free and easy replacement or refund in one year quality warranty time.

Good quality and material. Total 40 Pieces in one set.

Operating temperature is -40℃ to +100℃, 3 pins terminals length about 15mm/0.59inch.

3V to 6.5V operating voltage, used for electric vehicle motor or industrial motor.

500mm length（about 20 inches ）

0.25%FS linearity,0-5K ohm Output

position sensor with 24DC supply

STABLE STRUCTURE: The Temperature Sensor adopts of Epoxy resin sealing structure so it is shake proof and temperature-resistant.

A SCOPE OF APPLICATION: PT100 Temperature Sensor can be used in a wide range of applications. It can not only form a bulk field installation structure with thermocouple and thermal resistance.

INTERFERENCE PREVENTING: PT100 Temperature Sensoris installed in the junction box of thermal resistance and thermocouple on site to directly output 4-20ma

compatible with 2015+ Mustang 2.3L Turbo EcoBoost 4 Bar T-MAP Sensor.

T-MAP Sensor with built in temperature sensor.

Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes.

Working voltage 5-24v wide voltage start

1KHz High response frequency

With 1m flexible link cable

KY-024 Linear Magnetic Hall Switches Speed Counting Sensor Module

Signal output instructions; single signal output

Circuit boards output switch quantity! (can be directly by SCM)

【High Precision】: ±2%FS small output error, full temperature range, high sensitivity and accuracy

【Widely Used】: Widely used in oil tank, gas tank and diesel tank to detect oil, fuel, diesel, gas, water or air pressure

【Voltage Protection】: Complete surge voltage protection function, safe for use

Adopted of Epoxy resin sealing structure so it is shake proof and temperature-resistant, suitable for installation and use in harsh site environment.

It is installed in the junction box of thermal resistance and thermocouple on site to directly output 4-20ma and 0-10ma signals, which not only saves costs, but also improves the anti-interference ability in the long distance transmission of signals.

High precision, low power consumption, wide range of ambient temperature, stable and reliable work.

0~ 300CM measuring range

0.2mm / pluse resolution

Pushpull output with ABZ 3 signals, 5 to 26 volts

Output low current IOL: 50mA. The hall effect sensor switches are suitable for electronic toys, small household appliances, sports equipment, etc.

Power supply voltage VCC: 24V. The sensor is small in size, high in sensitivity, easy to install and disassemble

Limit parameter (25 Celsius degree). The sensor has a wide operating temperature range and can be applied to a variety of equipment

TEST FIRST:- Test garage door to see if sunlight is causing the problem by temporarily shading the sensor. If garage door still does not shut, then this product WILL NOT FIX THE ISSUE.

Easily Installs on Existing Garage Door Sensor to Block Sunlight from Interfering with Garage Door Closing (See QR code for instruction))

Made of Durable PLA Plastic (3D printed)