Best Temperature Transducers in 2026

The Ultrasonic Flow Meter is 99% accurate and can measure the flow rate in any Plastic or Metallic Pipes. The High Temperature Transducers can work with temperatures from -40°F to 320°F (-40°C to 160°C).

Perfect for liquids like: water, sea water, kerosene, gasoline, fuel oil, crude oil, propane, butane and others.

Perfect to measure the flow rate in pipe materials like carbon steel, stainless steel, cast iron, ductile iron, copper, PVC, aluminium, asbestos, fiber glass and others.

◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring.

◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance ; with 3 size Sensor TS-2/ TM-1/ TL-1 Range: DN25~6000mm; Temperature : -30~90°C;

◆Range: DN15~300mm; Temperature : -30~90°C; with Standard small bracket size: 318*59*85mm

◆High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

◆Principle: transit-time ultrasonic flowmeter; Signal Output:1 way OCT output; Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data

❤❤(1)【Type of liquid：】Single liquid can transmit ultrasound, such as water, sea water, sewage, oil, alcohol, etc.

❤❤(2)【Pipe material：】Steel, stainless steel, cast iron, copper, PVC, aluminmum, glass steel, etc. Liner is allowed.

❤❤(3)【Installation methods: 】Wall mounting and Two ways of Din-rail mounting

This listing is for DN25-700mm pipe size, the water temperature is from -40-90 degree

It comes with TS-2 TM-1 type Transducer ; 5m*2 signal cable;metal clamp fixture; one aluminium case; tape ruler;adaptor; data line

The couping agent can not be sent to you because of air shipping regulation. Because it is like crystal liquid. You must use silica gel to replace. You must use it when you measure the flow rate. If you do not use the silica gel, it will have no signal

◆ This type Clamp-on Transducer is suitable for Ultrasonic Flowmeter/Ultrasonic Heat Meter like type of TUF-2000H/ TUF-2000P/ TUC-2000E.

◆ Medium Transducer for Pipe Diameter DN50 to 700mm,

◆ Medium Transducer Temperature : -30~90°C

◆ This type Clamp-on Transducer is suitable for Ultrasonic Flowmeter/Ultrasonic Heat Meter like type of TUF-2000H/ TUF-2000P/ TUC-2000E.

◆ Clamp-on Transducer TM-1 Medium Clip(size: 64*39*44mm)

◆ Medium Transducer for Pipe Diameter DN50 to 700mm,

◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring.

◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance ; TS-2 Sensor Standard Small Clip, Range: DN25~100mm; Temperature : -30~90°C; TS-2 Sensor size: 42*25*32mm