Best Cnyst in 2026

◆ Testing parameters: Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx; Compatible with ISO, DIN, ANSI, JIS national standards;

◆ Measuring range (um): Ra: 0.005-16.000; Rz: 0.02-160.00;Data Storage: 100 groups

◆ 128 x 64 OLED dot matrix display, digital / graphic display; highlight no perspective;

◆ Durometer Test Block Kit

◆ Type A Durometer Test Block Kit containing 7 colors

◆ This Type A durometer tests the hardness of hard rubber and plastics.

◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring.

◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance ; with 3 size Sensor TS-2/ TM-1/ TL-1 Range: DN25~6000mm; Temperature : -30~90°C;

◆ Measurement Range 0~60 N/cm

◆ Display Range: 0~50N/cm

◆ Resolution 0.1, Fiducial Error: 5%

◆ Durometer Test Block Kit

◆ Type D Durometer Test Block Kit containing 3 colors,

◆ This Type D durometer tests the hardness of hard rubber and plastics.

◆ Durometer Test Block Kit

◆ Type D Durometer Test Block Kit containing 3 colors

◆ This Type D durometer tests the hardness of hard rubber and plastics.

◆ Measuring Range（mPa·s）: 20 ～ 100,000; Accuracy:±1% full scale range in use

◆ Number of Spindles: Spindles (Code L1,L2,L3,L4) are equipped with the product

◆ Rotating Speed(RPM): Four adjustable speed:6、12、30、60

◆ Resolution:128×64 OLED display; Hardness Standards:HL、HV、HRA、HRC、HRB、HB、HV、HS

◆ TestingRange:(170-960)HLD,(17.9-69.5)HRC,,(19-683)HB,(80-1042)HV,(30.6-102.6)HS,(59.1-88)HRA,(13.5-101.7)HRB

◆ Industry highlights, OLED display: Can clear display data under direct sunlight, suitable for all kinds of lighting conditions

◆ Be compatible with four standards of ISO, DIN, ANSI and JIS.Highly sophisticated inductance sensor.

◆ Measuring Range: Ra, Rq: 0.005~16.00µm / 0.020~629.9µinch; Rz, Rt: 0.020~160.0µm / 0.078~6299µinch

◆ Multiple parameter measurement: Ra, Rz, Rq, Rt, Small in size, light in weight and easy to use.

◆ High precision, high resolution, quick sampling speed, full-screen display.

◆ Measuring range: 20N·m/ 204.0Kg·cm/ 177.0Lb·in; Precision: ±1%; with integrated printer

◆ Division value: 0.001N·m/ 0.01Kg·cm/ 0.01Lb·in; Three units can be switched each other (N·m,kgf·cm,Ib·in).

◆ Stormer Viscometer: Touch screen viscometer is perfectly integrated with the touch screen technology, and the viscosity can be measured with a fashion, modern and high technology rapidly, accurately and directly.

◆ Control/Display mode: 5 inch colorful touch screen; Rotating speed: 200±0.1RPM/min

◆ Measurement accuracy: ±1%(full range); Measuring container:400ml

In the actual detection, it should be noted that the bounce frequency of the digital rebound test hammer should not be too fast, and the time interval of the second bounce should not be less than 1 second, so as to avoid the impact on the sampling accuracy caused by the bounce of the sensor tension spring when it has not been completely reset

Do not place the test hammer near magnets, motors or other equipment that will produce strong magnetic fields, and do not use the test hammer in an environment with strong magnetic fields. Exposure to strong magnetic field may cause abnormal operation of the test hammer or damage the test data stored in the test hammer.

.Please do not bring the test hammer from high-temperature environment to low-temperature environment or from low-temperature environment to high-temperature environment in a short time, which may cause water vapor condensation on the internal and external surfaces of the test hammer.

Single-channel double-cylinder, synchronous operation; automatic timing shutdown

The cylinder is made of high-quality colorless and transparent plexiglass.

Automatic preset speed, you can preset the number of laps at will; display preset value and real-time value in time division.

◆ Tension Indicator: Colored LED Indication of High,Low and OK

◆ Measuring range: 0~750N(Newtons), 0~120lb(Pounds), 0~77kg(Kilograms), 0~114 Seems

◆ Accuracy: ±5% of full-scale, Resolution: ±1N (or1 least significant digit of other units)

In the actual detection, it should be noted that the bounce frequency of the digital rebound test hammer should not be too fast, and the time interval of the second bounce should not be less than 1 second, so as to avoid the impact on the sampling accuracy caused by the bounce of the sensor tension spring when it has not been completely reset

Do not place the test hammer near magnets, motors or other equipment that will produce strong magnetic fields, and do not use the test hammer in an environment with strong magnetic fields. Exposure to strong magnetic field may cause abnormal operation of the test hammer or damage the test data stored in the test hammer.

.Please do not bring the test hammer from high-temperature environment to low-temperature environment or from low-temperature environment to high-temperature environment in a short time, which may cause water vapor condensation on the internal and external surfaces of the test hammer.

◆ This type Clamp-on Transducer is suitable for Ultrasonic Flowmeter/Ultrasonic Heat Meter like type of TUF-2000H/ TUF-2000P/ TUC-2000E.

◆ Medium Transducer for Pipe Diameter DN50 to 700mm,

◆ Medium Transducer Temperature : -30~90°C

◆ This type Clamp-on Transducer is suitable for Ultrasonic Flowmeter/Ultrasonic Heat Meter like type of TUF-2000H/ TUF-2000P/ TUC-2000E.

◆ Clamp-on Transducer TM-1 Medium Clip(size: 64*39*44mm)

◆ Medium Transducer for Pipe Diameter DN50 to 700mm,

◆ Caliber 8mm version is a general-purpose color difference meter, mostly used on flat surface considering the general method for detecting color, all walks of life habit, and the measuring caliber requirements of various materials.

◆ WF32 has eight kinds of measuring light source (A, D50, D65, C, F2, F7, F11 and F12);Illumination Condition: CIE Recommendation:8/d; Yellowness and Whiteness: Ganci whiteness. ISO brightness. YI yellowness

◆ Six kinds of color modes (CIE1976LAB, CIEXYZ, CIELUV, HunterLAB, sRGB, white yellowness) ;Measurement Condition: Observer:CIE 10°Standard observer, Light source:A C D50 D65 F2(CWF) F7 F11(TL84) F12(U30) , Contain light way:SCI SCE

◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring.

◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance ; TS-2 Sensor Standard Small Clip, Range: DN25~100mm; Temperature : -30~90°C; TS-2 Sensor size: 42*25*32mm

◆ Higher measurement stability and accuracy, Delta E ab<0.03.; Switchable 8mm and 4mm measuring apertures, easy to measure concave surface.

◆ Color Space: CI E L AB, XYZ, LCh, CI E RGB, CI E LUV; Color Difference Formula:ΔE* ab, ΔE( h) , ΔE* uv,ΔE* 94, ΔE*cmc ( 2: 1) , ΔE*cmc ( 1: 1) , ΔE* 00

◆ Double locating: illuminating locating and cross locating; New integrating sphere optical path design, more stable measurement; Illuminating/Viewing Geometry: 8°/ d

◆ Measuring range: 0-80%, Resolution: 0.1 or 0.01, Accuracy: ± 0.5%n

◆ Display: 4 digital LCD, with back light gives exact and clearly reading although you stay at the somber conditions.

◆ This instrument adopted the high frequency principle based on the introduction of the most advanced technology

◆ Durometer Test Block Kit

◆ Type A Durometer Test Block Kit containing 7 colors

◆ This Type A durometer tests the hardness of hard rubber and plastics.

Fine adjustment

Retractable pins in base for working on flat surfaces

Bottom v-groove ground for Cylindrical works

Our part # GAR-S22

Pocket size gage with 22 precision surfaces for specifying and controlling surface finishes

There are twenty two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled - ranging from 2 to 500 microinches

Portable, handheld device used to measure surface roughness in shop, metalworking, manufacturing, and quality control (QC) applications

2.4-inch, color, backlit, LCD touchscreen displays in vertical or horizontal orientation, left- or right-hand views, and has an Ingress-Protection (IP)-53 rating for water and dust resistance

Auto-calibration for accurate measurement of 39 parameters, five profiles, and storage of up to 10 measurement conditions, and one measured profile

The Surface Roughness Tester AMT211 complies with international standards ISO, DIN, ANSI, JIS. Users-friendly system and intuitive menu navigation, Multi-direction measurement such as lateral and upsid.

Sensor can work in the meter, also can work independent through 1.0m length cable (Max can be 3m).

Affordable Touch screen & button operational Surface Roughness Tester. Roughness parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr, Ry(JIS), Rmax, RPc, Rk, Rpk, Rvk, Mr1, Mr2, resolution 0.001 micron. With bluetooth, also can by app to connect with mobile phone.

Detector used with Surftest SJ-210 and SJ-301 surface roughness testers in shop floor, machining, statistical processing, histogram-based data management, and quality control (QC) applications

Diamond stylus tip material and radius for precision surface roughness detection

Built-in skid force of 400mN, or less, and measuring forces such as 4mN (SJ-301), or 0.75mN (SJ-210)

★Testing parameters:Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr, Rx, RPc, Rk, Rpk, Rvk, Mr1, Mr2;

★Measuring range (um):Ra: 0.005-16.000;Rz: 0.02-160.00

★Real-time clock settings and display, convenient data recording and storage.

Small and lightweight; ideal as mobile surface roughness measuring instruments with Increased flexibility with the removable drive unit

Large illuminated 4.3" TFT touch rotatable display just like a smartphone makes it simple to operate. Start button is also home button for direct access to start screen

31 parameters standards in accordance to ISO /JIS as well as parameter list: offer the same range of functions as a laboratory instrument

The 2.4-inch color graphic LCD provides excellent readability and an intuitive display that is easy to use. The LCD also includesa backlight for improved visibility in dark environments.

The Surftest SJ-210 is a user-friendly surface roughness measurement instrument designed as a handheld tool that can be carried with you and used on-site.

Charging is reduced approximately one quarter of the time compared with conventional models. The detector supports a variety of measurement orientations and can perform measurements up against a wall surface or while facing upward. When combined with optional accessories such as a height gage adapter, the detector can perform measurements in various orientations and settings.