Best Calt in 2026

Including: 1pc encoder, 1pc bracket, 1pc 200mm perimeter wheel and screws

Power supply 5V, Line Driver Output, 200PPR

Mini measuring unit 1mm

Ø38mm outer size and Ø6mm shaft

2000 P/R Resolution

5V Line driver output

Angle sensor outer diameter is only 22mm and 6mm shaft

Measuring full Angle 360 °

Output signal 0-3.3V

Angle sensor outer diameter is only 22mm and 6mm shaft

Measuring full Angle 360 °

Output signal 0-5V

0~200CM measuring range

0.1mm/pluse resolution

Pushpull output with ABZ 3 signals

Anti-Deformation & Non-Slip -- The wheel surface is made of thickening rubber, which is anti-deformation and anti-slip.It have high resolution

Strong Structure -- Aluminum alloy bracket, strong structure, durable in use

High Rigidity -- High rigidity, stable operation, easy to use

500mm length（about 20 inches ）

0.25%FS linearity,0-5K ohm Output

position sensor with 24DC supply

1- High accuracy, good stability,0-10kg

2- Sensitivity: 1.0-1.5 mV/V

3- Material:Stainless steel

Ø60mm shell and Ø10mm hollow shaft

about 0.2kg

Line driver output, 5VDC

Including: 1pc encoder, 1pc bracket, 1pc HB961 Indicator,1pc 300mm perimeter wheel and screws

Power supply 5-26V, Push pull output, 600PPR

min measuring unit:1mm

small size and light weight with high resolution 1000PPR

blind shaft design easy to install

pushpull output for reliable signal output

1- High accuracy, good stability, 10kg

2- Sensitivity: 1.0-2.0 mV/V

3- Material:stainless steel 17-4PH

5V DC supply

good quality for the material

easy to instal, 0-45m/s

9-30V dc supply

good quality for the material

easy to instal, 0-45m/s

Tension and compression can be used sensor

High accuracy with good stability loadcell 1kg

Mini size, 4 wires connection

sampling rate up to 80 times / second

transmitter 4-20mA out

push pull force indicator

Operating voltage: 24VDC

Output signal: 0-5V, 0-10V, 4-20MA

Accuracy: better than 0.2% F.S

1000mm length（about 40 inches)

0.25%FS linearity, 0-5V Output

position sensor with 24DC supply

GHS58-10C series encoder is designed to provide pulse feedback when the shaft is rotated.

200ppr, 5-26V pushpull

Shaft diameter 10mm, Body diameter 58mm, Cable length 1 meter.

Highly vibration-isolating

Well misalignment compensation

Low torsion spring stiffness

0~ 300CM measuring range

0.2mm / pluse resolution

Pushpull output with ABZ 3 signals, 5 to 26 volts

Highly vibration-isolating

Well misalignment compensation

Low torsion spring stiffness, Outer diameter D=26mm,Length L=50mm

Working voltage: 5V; One round number of pulse: 20

The Material of Knob Cap: aluminium alloy；The Specification of Knob Cap: diameter: 15mm/ 0.59in; height: 16.5mm/ 0.65in

The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited

【Rotary Encoder】These are continuous rotary encoder switch; Type: Encoder code with Switch; Adjustment method: 360 Degree Rotary; Number of digits: 20 digits; Pins: 5.

【Encoder Specification】Shaft Diameter: 6mm/0.24inch; Shaft Length: 20mm/0.79inch; With built in push button switch (push to operate).

【Widely Application】Can be used for data entry as with modern in car CD players, for volume & on/off control or data selection via LED or LCD display; perfect for use with PIC or ATMEL microcontrollers.

IN4148 Data: Forward rectified current:200mA,Maximum recurrent peak reverse voltage:100V

Feature:Small glass structure ensures high reliability/Fast switching/Low leakage

Case: Glass,hermetically sealed

3D joystick for flight simulation games, Analogue Stick Thumb sticks Joystick Cap Mushroom Head.

Developed for Nintendo Switch game console. DIY your Nintendo Switch controller.

Suitable for PS3, Nintendo Switch, Raspberry Pi, Retropie, MAME and all windows systems! Hold the Mode key for 5 seconds to switch to mode.

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases.

Do not touch the product with water, as this may cause abnormal output waveforms.

Material: Plastic, Metal; Main Color: Blue, Silver Tone.

Type: Encoder code with Switch; Adjustment method: 360 Degree Rotary; Number of digits: 20 digits; Pins: 5.

Shaft Diameter: 6mm/0.24inch; Shaft Length: 20mm/0.79inch.

In the forward rotation, the A line phase leads the B line phase; when reversed, the B line phase leads the A line phase. The phase relationship and number of rotations of AB can be identified using a simple digital logic circuit (exclusive OR gate and D flip-flop).

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases.

Do not touch the product with water, as this may cause abnormal output waveforms.

Material: Plastic, Metal; Main Color: Blue, Silver Tone.

★Product Name: Encoder code with Switch; Adjustment Method: 360 Degree; Pin Numbers: 7; Rated Voltage: 5 V.

★Shaft Diameter: 6mm/0.24"; Shaft Height: 20mm/0.79"; Thread Diameter: 6.8mm/0.27".Shaft Movement Direction: Action Type: Momentary.

★Material: Plastic, Metal; Main Color: Blue, Silver Tone.Shaft type: Plum blossom handle