Best Connector Car Pushbutton Switches in 2026

Latching switch: Push it, ON; Push it again, OFF

Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Mounting Hole Diameter: φ19mm

Red LED voltage: 12V only ; Switch Rating : 250V 5A

Shell Metarial:Stainless Steel (waterproof degsain)

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Black AluminiumPower Symbol Pushbutton Switch; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

ON/OFF ILLUMINATED PUSHBUTTON SWITCH: 4 pin metal self-locking push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push-button: 12mm.

EASY TO CONNECT & DURABLE: Latching pushbutton switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSHBUTTON SWITCH: ON/OFFpush button switch with blue indicator light, switch and LED ring light is separated, the LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

12V Waterproof Push-Button Switch with quick connector, press once to open, then press again to close.

Push Button Switch with waterproof rubber boot, about 20cm AWG18 wire. 3M tape on the back and easy to install quick connector.

Ideal for any 12 volt DC application that requires a waterproof on/off push button switch.

Latching switch: Push it, ON; Push it again, OFF

The newer model of U16C2, with a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

Product Name: 12 volt switch on off, 12V Latching Push Button ; Latching switch: Push it，ON; Push it again，OFF；Contact Configuration: 1NO1NC；Protection level: IP65, IK10;

Mounting Hole Size : Φ19mm/0.74''；LED voltage: 12V/24V DC; Rated current: 3A; Blue LED Light.

High quality metal material & IP65 waterproof protection; The switch can be used in car motorcycle boat yacht modified, computer appliance lamp switch, industrial control, access control

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Stainless Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Durable ABS plastic anti-retardant material

Voltage: DC 12V;Dimension: 34 * 24 * 53mm/1.34" * 0.94" * 2.09"

Symbol laser etched directly onto the switch face to ensure long image life,with Blue Led light

The On/Off Switch is a spare part with the light kit, as the controller have power consumption when it is not use, it will drain about 7 mA current, so an on/off switch is very important to disconnect power when the bike was kept for long term storage.

Push Button Switch with waterproof rubber boot.Ideal for any 6-14 volt DC application requiring a waterproof on-off push button switch.Works great for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc.

Included : 1pc 12V Waterproof Push-Button On-Off Switch with 3M taple on pack,one quick connector

12V Waterproof Push-Button On-Off Switch with quick connector for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc

Easy install:- Push Button Switch with waterproof rubber boot and 3M tape on pack and quick connector

Ideal for any 12 volt DC application requiring a waterproof on-off push button switch.

Push Button Switch: The ON-OFF rocker switch with SPST design (single pole single Throw) is manufactured to fit in the OEM switch blank for your cars. It come with a small pigtail that plugs into the back of the switch for better installation.

Cool LED illumination: built-in two premium LEDs Emits soft light to illuminate the patterns on the switch, easy for you to find the switch in the dark.

Wide Application: The switch is perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. The switch is rated for 3 amps, you would need a relay if your lights are rated higher.

【Latching Switch】Push-ON; Push it again-OFF

【Brand New Pushbutton Switch】16mm Black Aluminium Alloy Ring LED Latching Pushbutton Switch ; LED voltage: 12V-24V

【IP66 Waterproof Degree】High quality metal material and can be used in wet or dusty enviroment.

【Brand New Pushbutton Switch】16mm Momentary Black Aluminium Alloy Ring LED Pushbutton Switch ; LED voltage: 12V-24V.

【Momentary Switch】Push and Hold-ON; Release-OFF

【IP66 Waterproof Degree】High quality metal material and can be used in wet or dusty enviroment.

Dual led backlit on-off push button switch with the wiring connector, convenient for you to install. It can control 2 lights at the same time.

Dual different color led bulbs, the button emits red lights when the car is powered on and it turns to green after being pressed.(ON-GREEN, OFF-RED)

Rated at 3Amp/12V, surface face size is 1.54'' X 0.83''(39mm X 21mm), minimum depth required (From Face Plate): 2.69'' . The switch is perfect for controlling camera, fog lights, reverse lights, led light bar, led work light, spot lights, rear light, off road light, etc.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC