Best Healifty Guitar Bridges Bridge Parts in 2026

HiMass bass bridge

.75” string spacing

Zinc saddles

Nickel-plated steel vintage-style bridge assembly with six bent "Fender" stamped saddles

Assembly includes saddles, intonation screws/springs, and saddle height adjustment screws

Tremolo block will accept standard 10/32 thread tremolo arm

Product 1: Genuine chrome-plated ashtray-style bridge and pickup covers

Product 1: Includes mounting hardware

Product 1: Used on vintage Precision Bass guitars

The Package Length of the Product is 23.876 centimeters

The Package Width of the Product is 14.986 centimeters

The Package Height of the Product is 2.286 centimeters

Fits Strat or tele Electric guitar, can be used on hardtail bridge and other bridges with 2-1/16" (52.5mm) string spacing

Material: metal alloy; String spacing: 52.5mm(2-1/16")mm

The saddles help prevent string breakage, improve tone and sustain and keep your guitar in tune

Guitar bridge pins-Comes with 24 pieces guitar pins (12pcs black guitar pins + 12pcs ivory guitar pins, made of ABS), fits for most acoustic guitars and great replacements for your old or damage guitars.

Bridge Pin Puller-1pc plastic pin puller inside for better convenience,no longer need pliers or side cutters to pop pegs out and risk damaging guitar.

Great gift- These plastic bridge pins are the nice gift for yourself or the guitarist, well made and it comes in a nice metal box.

Genuine Fender replacement accessory kit

Contains volume and tone control knobs, pickup switch tip and tremolo arm tip, tremolo backplate and pickup covers

Tremolo tips are non-threaded with .199" hole diameter that fit Player and Standard Series Stratocasters

Machined 4 string bass bridge is computer designed and made out of heavy gauge brass (not that cheap flimsy stuff).

This is a professional quality, plated Brass, direct replacement for a traditional 5 hole, 4 string Fender bass bridges. It will mount without any modification to the bass.

The back block covers those ugly string balls, giving your bass guitar that clean look.

Real Bone-Donner acoustic guitar bridge pins is made of real cattle bone which is high quality.You can see a trace of cattle bone fiber under strong light. Widely applicable -Standard size, card slot about 5.0mm design. Donner guitar pins is applicable to most brands of guitars. Please check the dimensions before purchasing to avoid special circumstances.If it is too large, sand it with sandpaper to get the right size.

Widely applicable -Standard size, card slot about 5.0mm design. Donner guitar pins is applicable to most brands of guitars. Please check the dimensions before purchasing to avoid special circumstances.If it is too large, sand it with sandpaper to get the right size.

Reinforcement sustain-Not only can it act as a fixed string, but it can also effectively enhance the sustain on the original guitar.

Why Should You Use STRING TIE? It Makes Changing Strings a Quick and Easy Process.

It Enhances Sound by Focusing Tension on the End of the Bridge.

It Prevents Grooving of the Bridge and Scratching of Guitar Body and Top.

Function: the guitar removal tool is designed to pull the bridge pin directly without damaging the guitar; And the bridge pins are small and exquisite, useful spare parts for guitars

Reliable Guitar Puller: the bridge pin puller is made of good quality alloy; It is lightweight and portable, a beautiful accessory for your guitar, easy to use

Suitable Range: the guitar puller fits most standard bridge pins and serves as a puller, extractor and removal tool to replace acoustic guitar bridge pins

Bone nut size: 43mm X 6mm X 8.5mm.

Bone saddle size: 72mm X 3mm X 9mm.

6pcs Guitar Bone Bridge Pins: Length: 30.8mm/1.21inch; Diameter of the head: 7.6mm/0.31"; Skirt /collar: 5.33mm/0.21"; End of post: 3.4mm/0.13"; Length of post: 23.7mm/0.93"; Dot's dimension: 3.2mm/0.13".

Tailpiece Studs Spacing: Approx. 81.9 mm (3.23 inch). Whole tailpiece length: Approx. 101 mm (3.98 inch). Tailpiece String spacing: Approx. 10.5 mm (0.41 inch).

Saddle bridge(L x W): 88.9 x 13.7 mm(3.5 x 0.54 inch), bridge post spacing: Approx. 73.9 mm (2.91 inches), bridge string spacing: Approx. 10.5mm (0.41 inch). Please check the parameter drawing in the attached pics before placing your order.

With zinc alloy material, bronze plating surface, excellent durability.

♫ Fits Strat or Tele style guitar

♫ String spacing: 52.5mm (2-1/16");Material: Zinc alloy

♫ Improving tone and sustain and keeping your guitar in tone

A unique solution to a common bridge problem, this spruce device attaches beneath a guitar bridge

An adjustable spruce "pressure post" rests against the tailblock, providing leverage to flatten the soundboard

Better bridge contact and alignment can also enhance sound projection

Universal size suitable for most modern acoustic guitars.

High quality guitar end pegs for strong and consistent string fixing.

Designed to ensure clean string tone and resonance.

"PATENTED SYSTEM - Acoustic guitar bridge plates are constantly under stress produced by the strings, which over time hollows-out traditional bridge pin holes. Power Pins 2.0 are a patented and durable acoustic guitar pin system that leads the string straight through the pin, keeping the string tension on a horizontal plane. They install simply and quickly (no modification required) and, once applied, never need to be removed. Comes with Power Plate upgraded and installation tool.

"PROTECTS BRIDGE AND BRIDGE PLATE - Over time, the tension of an acoustic guitar's strings slowly hollow-out the pin holes on its bridge plate, damaging an important and difficult-to-replace component. By streamlining the tension, these attractive additions protect the integrity of the bridge plate and can functionally repair previous damage to older guitars.

"OFFERS IMPROVED SOUND - In addition to protecting the bridge, Power Pins 2.0 improve bridge-to-soundboard contact, which evens response, increases tone, and clarifies the individual character of each string, especially when amplified.

Brand new Tune-O-Matic style stop bar tail piece in chrome color.

Compatible with Les Paul / SG style guitars and many 6-string electric guitars that use the traditional stop type tailpiece. 

This tail piece has an overall string span of 52.5mm(2.07inch) with the six string holes set deep into the rear edge of the tailpiece. It has a curved profile to match the curve of LP style guitars.

Universal size suitable for most modern acoustic guitars, 100% brand new and never used.

Shell with 4mm green abalone dot inside and brass circle outside on the head.

High quality moulded ABS plastic material. Black with green abalone dot. Length: Approx. 30mm(1.18in). Diameter of the head: Approx. 7.8mm(0.3in). Diameter of the end: Approx. 3.5mm(0.14in).

Material:cocobolo wood;Package Include:6 pcs guitar bridge pins

Fit for most acoustic guitar.This wooden guitar pins is a great choice to replace your old or damaged ones

Upgrade your bridge pins.Improve your guitar sound quality!Creates brighter and stable tone.Increase the responsiveness of the instrument and add clarity,sustain and more punches

Precision engineered, with quality Plating. The roller saddles are perfect for using with a Bigsby, or just to reduce string breakages and add sustain on any LP style guitar. This model has 6.3mm post holes to drop over 6mm posts, typically found on most Epiphone guitars and many other similar import guitar brands.

Includes anchors and large M8 threaded bridge posts with 6mm diameter top section

High stability saddle retention rings to eliminate saddle rattle

Genuine Fender Replacement Part

High Quality , Durable

Fits American and American Standard Series (USA) models manufactured from '86-'07. Saddles will not retrofit to a vintage-style bridge plate due to the offset intonation screw design.

Set of 6 stainless steel guitar bridge saddles in perfect working shape

Steel saddles will increase the sustain and tuning stability; No rough edges or burrs

Super low affordable price; These saddles require very little work and skill to install, it’s an easy way to improve your tone and sustain

The Authentic Patented Double-Locking Tremolo

Steel plate, screws, and inserts

Zinc saddles & block

NEW AND IMPROVED: Our new larger and more ergonomic design is features a flexible material, which makes it easier to push onto your guitar pins, and allows for gentler removal on most 6 and 12 string guitars.

PATENTED TECHNOLOGY: The Snapz Acoustic Guitar Bridge Pin Puller uses patented technology and a comfortable, ergonomic design for the safest, quickest, and most convenient way to remove bridge pins from your acoustic guitar.

PROTECTS YOUR GUITAR: Pliers and other devices can damage your guitar bridge while removing bridge pins. The Snapz Acoustic Guitar Bridge Pin Puller, however, protects your bridge and keeps it looking as good as the day you bought it.

Hold your guitar string in place while not affecting your tone

Guitar bridge pins-Comes with 6 pieces guitar pins , fits for most acoustic guitars and great replacements for your old or damage guitars.

Pin puller tool - Is designed to pull bridge pin directly without damaging your guitar and requires very little experience to install.

The technology of the guitar bridge pins has been upgraded, the white decorative points are not easy to fall out, and the appearance of the guitar pegs is more shiny and new.

Made of ebony with green abalone dot and brass circle on the head.

Upgrade your bridge pins. These high quality, precisely machined guitar bridge pins/endpins are polished to accent the beauty of the genuine ebony. It is a great replacements for your old or damaged ones

These beautiful pins are hand-made from the finest quality Ebony. Not only will these stunning pins make your guitar look marvelous, their density and rigidity provide better vibrational transfer through the bridge compared to plastic, so your guitar will sound better too!

Materials:iron

screw thread diameter:6mm

Arm Length:170mm (approx.).

brass material.Sturdy and robust steel plate for increased resonance & Sustain

It is suitable for electric guitar.Dimension: 20mm length x 10.5mm width x 6mm height,10.50mm width (standard spacing).Fits string width from E to e 54mm (2 1/8").

comes with wrench.Very easy to set intonation and action using the allen key provided