Best Fleor Bass Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for pickguard bass DIY custom;Enough material for 2 Tele or 2 Strat or Jazz Bass, one P-Bass of your own design and choice

3Ply Black/White/Black PVC material,0.09 inch thickness

Size:12 x17 inch (290x435mm)

The Pure Vintage range provides authentic Fender Pickguards made in the same exact fashion as they were 50-60 years ago.

Constructed of premium celluloid material.

Double check your screw-hole pattern to ensure you chose the right model.

Awesome pickguard screws,evenly finished and snugged up well in some dense wood,the heads coating does not come off easily

When a guitar for replacement pickups or wiring replace their rusty screws with these new screws can really brighten up a guitar

The mounting screws vary quite a bit, so you definitely do need to pick through them and find the right size for the job,They are exact specs of any screw you find for pickguards and back plate covers

Tex-mex pickups

Polysol-coated magnet wire

Staggered pole pieces for balanced output

Genuine Fender Replacement Part

High Quality

Durable

This pickguard fit 4 stings standard Fender Jazz Bass made in USA or Mexico,not Squier Jazz Bass. If you have other types of Jazz Bass guitar, you may need a little modification for line up.

There is 10 screw holes in the side of pickguard, without truss rod notch. No holes for thumb rest or pickup cover.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

This pickguard fit 4 stings standard Fender Jazz Bass made in USA or Mexico,not Squier Jazz Bass. If you have other types of Jazz Bass guitar, you may need a little modification for line up.

There is 10 screw holes in the side of pickguard, with truss rod notch.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

This Pickguard fits 13 Hole USA/Mexican Fender Standard P Bass,but not Fender Squier P Bass or other types of P Basses.If you have other types of P Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard,without truss rod notch. No holes for thumb rest or pickup cover.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation. PURE aluminum foil shield on the backside, better shielding property and anti-interference.

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard, with truss rod notch.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

Anti-scratch to protect the guitar, For Precision Bass guitar or similar

Material: PVC

Color: Black 1-Ply, 11 Screw

Fender Accesories 099-2157-000 Jazz Bass Guitar Pickguard

Jazz Bass Pickguard

Country of Origin: United States

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not USA Deluxe Jazz Bass, or Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

✔ | WIDE COMPATIBILITY | - The screws fit for most guitars or basses; Compatible with countersunk pickguards and cover plates.

✔ | PRODUCT DIMENSION | - Total length about 12mm; thread diameter about 3mm.

✔ | HIGH QUALITY MATERIAL | - The screws are made of high quality metal.

【Application】LAMSAM Guitar pickguard and pickups set fit for Fender stratocaster or SQ, MTM, a good choice for replacements of pick guard, please pay attention to the specifications

【Easy to Install】complete pickup and controls were pre-wired and attached to a scratch guard, with good and clean pots; it's a great way to save money and speed the completion of your solidbody guitar, only need to take a few minutes to wire to your output jack and grounding to your guitar bridge

【Staggered Alnico V Pickups on 3-ply plastic pick guards】pickups have alnico V bar maganets under each coil, making the pups to sound clarity and bright,

Pickguard is made of PVC Plastic and top layer is printed pattern by 3D technology

This Pickguard fits 10 hole standard Fender Jazz Bass made in USA or Mexico,but not Fender Squier or other types of Jazz Basses. If you have other types of Jazz basses,you may need to make a little modification to let it fit

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Authentic Fender Pickguard to ensure compatability.

Constructed of premium celluloid material.

Double check your screw-hole pattern to ensure you chose the right model.

The package length of the product is 14.9999999847 inches

The package width of the product is 9.49999999031 inches

The package height of the product is 0.99999999898 inches

This pickguard fits most(not all) Modern-Style American Standard series 4 string Precision Bass models,you may need a little modification if you use other model basses.

Pickguard holes may vary due to different country of origin or manufactured date, please double verify your screw-hole pattern according to our dimension photo to ensure the pickguard will fit your bass

High quality one ply Aluminum Anodized pickguard (not plastic) Thickness: 1.5mm (+/- 0.1mm error)

The bass pickguard is compatible with USA/Mexican fender electric bass par. This pickguard fits not fender squier jazz bass or other types of jazz basses.

Made of quality plastic material,rugged and easy to use.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

KAISH brushed Aluminum Anodized 4-hole Jazz Bass Control Plate for Fender American/Mexican Jazz Basses with 3/8"(9.5mm) CTS pots

1.5mm thickness

Designed to fit most American/Mexican Jazz Basses from 1964-Present

Genuine Kluson Universal Aluminum Ground Shield for most American P-Bass Pickguards Part #KGPAS

Replacement Kluson aluminum pickguard shield, designed to fit most American Fender P Bass guards. This is a universal shield so you don't have to stock multiple models. The price is unbeatable. Replaces Fender Part Number 001-9723-000.

Buy with confidence and full warranty from SportHiTech. Full manufacturer warranty and factory fresh.

Pickups are traditional split open type with ceramic magnets

Pickups Resistance: 8.0K 3.0H

Smooth and mid-range tone loaded bass pickguard kit

Authentic Fender Pickguard to ensure compatability.

Constructed of premium celluloid material.

Double check your screw-hole pattern to ensure you chose the right model.

Country Of Origin: United States

Model Number: 0018368049

Item Package Dimension: 4.599999995308" L x 2.299999997654" W x 0.199999999796" H

Application: Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates.

Material: metal alloy,Color: Chrome .

inch: Screw Head Diameter: 1/8 inch( 3mm),Screw Length: 1/2 inch(12mm)，the standard for Fender.

Pickups are traditional split open type with ceramic magnets

Pickups Resistance: 8.0K 3.0H

Smooth and mid-range tone loaded bass pickguard kit