Best 10Gtek Computer Networking Transceivers in 2025

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with multimode LC for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications

Compatible with MSA compliant equipment from Cisco, Ubiquiti, TP-Link, Huawei, Mikrotik, Netgear, Supermicro

Low power consumption and low EMI emission design; Hot-pluggable with advanced ESD protection

Data Rate: 1.25Gb/s

Wavelength: 850-nm; Reach: up to 550 meters

Fiber Type: Dual LC OM3 multi-mode fiber

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.3-Meter(1ft), 30AWG.

10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High-Performance Computing.

Widely compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices.

10GBase-CU, 2 Meter

2-pair differential twinax cable, Passive, EEPROM I2C

Compatible with Cisco SFP-H10GB-CU2M, Ubiquiti, Fortinet and more

UPC: 817882022729

Weight: 1.350 lbs

Used indoors for speeds up to 1 Gbps

10GBase-CU, SFP+ to SFP+ Connetor, Passive, 1 meters, 30AWG;

Compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc.

All products are passed by TDR & VNA tests in our Signal Integrity Lab.

Fiber Port: 1.25G, SC, 1310-nm

Fiber Type: SMF, Dual SC

RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover

【Convert Fiber to Ethernet】Designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa.

【Versatile Compatibility】Works with both single-mode and multi-mode fiber SFP modules and is fully compatible with 10/100/1000 Base-T Ethernet connections.

【Easy to Use】Plug and play with no software installation or configuration needed.

Data Rate: 10G

Wavelength: 850-nm; Reach: up to 300m

Fiber Type: Dual LC OM3/OM4 multi-mode fiber

Data Rate: 1.25Gb/s

Wavelength: 1310-nm

Reach: up to 10 km; Fiber Type: Dual LC single-mode fiber

Fiber Port: 550-m SFP transceiver included (1.25G, multimode, 850-nm)

Fiber Type: SFP MMF, Dual LC

RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover

✅1000Base-SX: 1.25 Gb/s, 850nm wavelength, MMF, Duplex Dual LC connetor link multi-mode fiber (OM1/OM2/OM3/OM4) LC/UPC cable, reach up to 550 m (1800 Ft). 2 Pack.

✅Wide Compatible: For Ubiquiti UniFi UF-MM-1G, Mikrotik S-85DLC05D, Netgear AGM731F, Intel, D-Link, TP-Link, Supermicro, Broadcom, Linksys, ZyXEL and Other Open Equipments.

✅Hot-swappable: Gigabit MiniGBIC Module PLUG and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z- compliant.

Compatible with Ubiquiti Networks UF-RJ45-1G, Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.

10/100/1000BASE-T SFP to RJ45 Copper for Category 5e copper wire. Gigabit SFP to RJ45 Copper Module 10/100/1000M Auto-Negotiation. Compliant with MSA standards. RJ45 connector. Reach 100m.

Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function.

LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems; LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources.

CONNECTOR TYPES: N type male to N type male; HF/VHF/UHF ; DC up to 6 GHz

ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required; Ensures maximum performance for your antenna installation.

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 550 meters/ 1804 ft via OM3/OM4 multimode fiber (MMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

SFP Passive DAC Patch Cable

Ultra-thin OD 4.2 mm (30 AWG)

Length: 0.5 m

Data Rate: 10G

Wavelength: 1310-nm; Reach: up to 10 km

Fiber Type: Dual LC single-mode fiber

Data Rate: 10G

Interface: RJ-45; Cable Type: CAT.6a/CAT7

Reach: up to 30 meters

Data Rate: 10G

Wavelength: 1310-nm; Reach: up to 10 km

Fiber Type: Dual LC single-mode fiber

Widely compatible for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Mikrotik, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Broadcom and other open switches.

Supports Links up to 30m using Cat.6a/7 Cable.

SFF-8431 and SFF-8432 MSA Compliant, IEEE 802.3az Compliant;

Widely compatible with Cisco, Meraki, Ubiquiti UniFi, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Broadcom, Linksys and other open switches. Ps: For Mikrotik CRS305 switch, pls purchase this version: #ASIN: B01MTNO4OE.

Data Rate: 1.25Gb/s; Connector: RJ-45 Copper

Cabling: Cat 5e/6/6a. It supports links up to 100m using Cat.5e Cable

Compliant with IEEE 802.3z Gigabit Ethernet

ANSI Fiber Channel compliant

Compliant with Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA) ports

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a single mode 1000BASE-EX SFP module, which enables you to convert 1000BASE-EX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 40 kilometers via OS1/OS2 single mode fiber (SMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.

✅Wide Compatible: For Intel E10GSFPT, MikroTik, Ubiquiti, Unifi, Netgear, QNAP, D-Link, Fortinet, TP-Link and Other Open Equipments with 10G SFP+ Port.

✅Hot-pluggable: PLUG and PLAY,operating temperature range: -20℃ to 70℃. Widely used in Switches, Server, Routers, NIC, Media Converter,and other fiber optic equipments.

[Data Rate] 10G, multi-rate (The switch optical port must be support 10G, the optical port on the other switch end can support multi rate). 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.)

[Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches.

[Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports.

Airband Aviation

NAV/COM/GPS

Li-Ion Battery

Strong Compatibility - for Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Ubiquiti UF-SM-10G, Mikrotik, D-Link, Supermicro, Netgear and Other Open Switches.

10GBase-LR SFP+ Module - 10Gb/s, single-mode, 1310nm, Duplex LC fiber, up to 10KM transmission distance.

Easy to use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch.

COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Ubiquiti UF-RJ45-10G, connecting 10g ethernet Switch, Edge Router, servers, network interface card (NICs) , media converter etc;

CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports);

PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az; Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery;