Best Ipolex Fiber Optic Transceivers in 2026

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 3-Meter(10ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.

Compatible with Cisco, Fortinet, Cisco Meraki, D-link, Supermicro, Mikrotik, Netgear, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.3-Meter(1ft), 30AWG.

10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High-Performance Computing.

Widely compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices.

Compatible with Ubiquiti Networks UF-RJ45-1G, Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.

10/100/1000BASE-T SFP to RJ45 Copper for Category 5e copper wire. Gigabit SFP to RJ45 Copper Module 10/100/1000M Auto-Negotiation. Compliant with MSA standards. RJ45 connector. Reach 100m.

Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function.

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 550 meters/ 1804 ft via OM3/OM4 multimode fiber (MMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 550 meters/ 1804 ft via OM3/OM4 multimode fiber (MMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

✅Multi Rate: 1.25Gb/2.5Gb/5Gb/10base-T Transceiver Support 10Gbase-R on host port，support 10Gbase-T / 5Gbase-T /2.5Gbase-T /1000Gbase-T on line port. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.

✅RJ-45 Connector: 10Gb SFP+ to RJ45 Ethernet Copper Module supports 10 Gigabit over Cat 6a/7/8 cable, up to 30 meters (98ft). Supprots 5Gb/2.5Gb rate over Cat 5e cable or better,up to 50 meters (164ft). Supprots 1000M rate over Cat 5e cable or better,up to 100 meters (328ft).

✅Wide Compatible: For Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Meraki, MikroTik, TP-Link TL-SM5310-T, Netgear AXM765, D-Link, Broadcom, QNAP, Linksys, Supermicro, Edge-core, EMC, F5, Norkia, QTC, Supermicro and Other Open Switches with 10G SFP+ Port.

[Data Rate] 10G, multi-rate (The switch optical port must be support 10G, the optical port on the other switch end can support multi rate). 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.)

[Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches.

[Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports.

Seamless Conversion of LC Fiber to Copper – This fiber optic to ethernet media converter kit includes a single mode 1000BASE-EX SFP module, which enables you to convert 1000BASE-EX LC fiber to 10/100/1000 Base-T RJ-45 copper media or vice versa.

Extend Your Transmission Distance – By using this ethernet fiber media converter, you can easily extend link distance up to 40 kilometers via OS1/OS2 single mode fiber (SMF, LC, Duplex).

Plug and Play – No software installation or configuration required. Hot-swappable design makes this ethernet fiber converter easy to install and troubleshoot.

A handheld Ethernet tester for quick, automated verification of network connectivity and availability. Connect an RJ-45 or fiber cable (2000 model only) from the network hub or wall plate to the LinkRunner AT RJ-45 LAN or fiber port.

Tests 10/100/1000 Mbps twisted pair and 100/1000 Mbps fiber optic Ethernet links

AutoTest accurately identifies network problems in 10 seconds

100% CISCO GLC-LH-SMD COMPATIBLE SFP TRANSCEIVER: Works with Cisco switches like Firepower, ASR920, IE2000, IE4000, ASR1000 and others

TECHNICAL SPECS: 1000BASE-LX/LH | 1 Gbps | Single Mode (SMF)/Multi Mode (MMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi)

TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Cisco routers and switches; DDM support reports the transceiver's status to most SNMP network management tools

40GbE QSFP+ to 4xSFP+ DAC Direct Attach Copper Twinax Breakout Cable, Passive, 1-Meter(3.3ft), 30AWG

Widely compatible with Cisco QSFP-4SFP10G-CU1M Devices, and other open switch Devices

40G QSFP+ to 4xSFP+ Cable can connect 40 Gigabit switch, router, server, NIC, or other fiber optic equipments with QSFP+ ports to 10 Gigabit equipments with SFP+ port for Network Attached Storage, Storage Area Network, and High Performance Computing

4PCS Gigabit SFP to RJ45 Copper Module 10/100/1000M Auto-Negotiation;Data Rate:1.25Gb/s, Interface:RJ45 connector; Reach:up to 100M transmission over CAT.5e Cable Type.

Widely Used in fiber switches,routers,NIC,server or other fiber optic equipments with 1Gb SFP ports.★Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches.

Connects a network switch SFP to RJ45 Gigabit Ethernet network for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications Low power consumption and low EMI emission design SFP RJ45 module; Hot-pluggable with advanced ESD protection.

ADDS FIBER: Optic connectivity to Cisco 100 to 500 Series switches

CONNECTIVITY: 1000BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 500 m

DURABLE AND LOW POWER CONSUMPTION: Less power usage and heat-conducting increases the life of the product

AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed and Extends in over Fiber - Distance and Fiber Type Depends on SFP Module You Choose

SUPPORTS both 155M (100FX/SX/LX/…) Fast Ethernet and 1.25G (1000FX/LX/SX/…) Gigabit Speed SFP transceivers (IMPORTANT – default setting is 1000M (Gigabit SFP), change the DIP switch setting if you use 155M (Fast Ethernet) SFP transceiver.

SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance

【SFP+ to RJ45 10GBase-T Copper SFP】Transmit data seamlessly up to 30 meters at 10Gbps (UTP cat. 6a or above), 100 meters at 2.5G/1G/100Mbps (Cat. 5e or above) between your SFP+ interface and the copper ethernet port.

【Wide Compatibility】Compatible with most fiber switches, media converters, routers or other fiber optic equipments with 10G SFP+ ports, TL-SM5310-T provides additional copper cable connections for peace of mind.

【Easy for deployment】Plug and Play with no software installation or configuration/technician needed.

【 10GBASE-LR】SFP+ to LC Optical Gigabit Ethernet transceiver module, Single Mode 1310nm LC duplex connector DDM 10km

【 Wide Compatibility】Compatible for HPE ProCurve J9151A HPE Aruba J9151D and Other Open Switches

【HPE SFP+ 】 SFP Transceivers modules supporting data rate of 10Gbps and 10km transmission distance with SMF.Compliant, SFP Transceivers Multi-Source Agreement and SFF-8472 digital diagnostics functions,Compliant MSA

EXTEND YOUR GIGABIT EITHERNET SIGNAL: This fiber transceiver unit converts a copper Ethernet signal to singlemode fiber (and vice versa) to extend a 10/100/1000 Mbps Gigabit Ethernet connection up to 12. 4 miles (20 kilometers). Two converters are needed to extend an Ethernet connection. Includes North America, U. K. , Europe and Australia plug adapters

EXTEND BEYOND THE LIMITS OF COPPER: Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-INT-SC-SM with singlemode fiber cable to reach greater distances.

SUPPORTS SINGLEMODE FIBER WITH SC CONNECTORS: Singlemode fiber optic cabling with SC ends connect the two converters, and copper cabling connects the converter to your desired network components.

Fiber Type:1.25Gb/s Dual LC OM3 Fiber Module 4Pcs; Wavelength: 850 nm Multimode; Reach: up to 550 meters; with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant.

Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function.

Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing.

📡 FLYPROFiber focuses on fiber optic trasceivers for 12 years. We produce high quality transceivers, every transceiver has been tested for 26 steps before shipping.

📡 This 10GBASE-SR Optics Multimode Module Cisco can be fully compatible with Cisco SFP-10G-SR/SFP-10G-SR-S, Netgear, Ubiquiti, Supermicro, Linksys, QNAP, D-Link, TP-Link, Asus and other open brand devices, widely used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 10Gb sfp+ ports.

📡 FLYPROFiber 10G SR MMF SFP+ Transceiver supports 10Gbs transfer speed for max distance 300m over OM3 MMF, 850nm wavelength.

100G Ethernet Module: 100G Gigabit Ethernet for Cisco QSFP port, MSA Compliant. Compatible for Cisco QSFP-100G-LR4-S and Other Open Switches.

100G QSFP28 Single-Mode Transceivers: 100Gb/s data rate, LC duplex connector, 4 LWDM Lanes: 4 LWDM lanes: 1295nm, 1300nm, 1305nm,1309nm, up to 10km, working temperature: 0℃ ~ +70℃, Tx Power(dBm): -4.3 ~ +4.5, Rx Sens.(dBm): ＜ -10.6.

Easy to Use: Plug and play, hot-pluggable. DDM allows you to monitor the critical information, to find out some potential problems. Widely used in fiber switches, routers, NIC, server or other fiber optic equipment with 100Gb QSFP28 ports.

【High Performance】 Single mode duplex 10 Gigabit SFP+ transceiver, supports up to 10km fiber length connection and 0~70℃ operating temperature.

【Widely Compatible】 The SFP+ transceiver are widely compatible with Cisco products(Cisco 3000 &6000 series router are not supported) and Netgear, MikroTik, Ubiquity, DLink etc., ( Not recommended for HP, Juniper and Aruba products). The fiber module also works well with switch, router, media converter and more 10G SFP+ optic ports

【High Quality】 The shell adopts high density and heat-resistant insulation zinc alloy, high performance chipset, which makes the product more stable and efficient transmission, and low power consumption. More than 1000k+ pcs SFP are already deploy in global market

✅40G QSFP+ to QSFP+ DAC Twinax cable assembly, 40GBASE-CU Passive, 40Gb/s Data Rate, 0.5-meter (1.64ft), 30AWG. DAC Length= with 2 QSFP+ connectors.

✅Widely compatible with Cisco QSFP-H40G-CU50CM, Meraki MA-CBL-40G-50CM, Mikrotik, Open Switch Devices with 40G QSFP+ ports.

✅Widely compatible with Cisco QSFP-H40G-CU50CM, Meraki MA-CBL-40G-50CM, Mikrotik, Open Switch Devices with 40G QSFP+ ports.

√ EASY TO INSTALL: Our Mini-GBIC (SFP) module provides a simple way to add Gigabit functionality to your Linksys or Cisco small business series switch.

√ CISCO & LINKSYS COMPATIBLE: Used to connect 2 switches together, using Gigabit fiber.

√ SUPER FAST: 1310 nanometer wavelength light in multimode filter optic cables with data transfer rates of up to 1Gbit/s.

The Cisco GLC-SX-MMD operates on ordinary multi-mode fiber optic link spans of up to 550 m in length

Cisco Original 1000BASE-SX SFP Module with DOM

Cisco Original 1000BASE-SX SFP Module with DOM

Package includes: 1x Gigabit Ethernet Media Converter SFP Slot, 1x SFP SX transceiver, 1x OM3 Multi-mode Fiber(1m=3.3ft), 1x Power Supply.

Gigabit Ethernet Media Converter: 10/100/1000Base-Tx to 1000Base-LX, 1.25Gb/s, support Gigabit Ethernet.

1000Base-SX Gigabit Multimode SFP Transceiver: Hot-pluggable, Connected with Multi-Mode Fiber.

Data Rate: 1.25Gbps; Wave Length: 1310nm.

Distances up to 10km; DOM Support.

1000Base-LX/LH SFP module: 1000Mbps data rate, Single-Mode, duplex LC connector, 1310nm wavelength, the transmission distance up to 10km, working temperature: 0℃ ~ +70℃, Tx Power(dBm): -9 ~ -3, Rx Sens.(dBm): ＜ -22.

40GBASE-SR4 QSFP+ to MPO Optical 40G Ethernet transceiver module, Multimode, 4-lanes, 850nm, 12-fiber MPO/MTP connector, DDM, up to 100m

Wide Compatibility - Cisco QSFP-40G-SR4 and other Open Switches. Compliant to the IEEE 802.3ba standard, SFF 8436 and QSFP Multisource Agreement

Easy to Use - Easy installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 40Gb QSFP+ ports

Ubiquiti Networks UACC-OM-MM-10G-D-2 Network transceiver Module Fiber, W127028467 (transceiver Module Fiber Optic 10000 Mbit/s 850 nm)

UACC-OM-MM-10G-D-2

2-Pack

10G Base-R (Open SFP+ 10G slot) to 10G Base-T UTP Copper RJ-45 port Fiber Media Converter;

Convert & Extend Copper Distance of Your High Speed 10gbps network connect far beyond – your SFP+ fiber transceiver distance is the only limit now;

Supports any SFP+ 10G transceiver of your choice, be it Single or Multimode, or even WDM single optical fiber type – it’s pure Open SFP+ slot;

Zero configuration and fast deployment of this compact 4 port fiber optic switch unmanaged. This bundle includes one Mutlimode SFP as shown in the product images. The CableRack switch 4 port gigabit allows you to add additional multimode fiber LC to LC or sing mode fiber transceivers or even mix and match them in the 4 port hub.

Accepts most compatible Singlemode and Multimode SFP modules including CableRack brand. Although this bundle includes one one SFP, this sfp switch may be populated with any additional 1GB fiber optic card transceivers, most compatible mm sfp using mm fiber will work in addition to singlemode lc to lc fiber transceivers and will be full compatible with glc sx mmd and glc lh sm modules.

All ports see all traffic including any added singlemode or multimode transceivers and the 1000BaseT RJ45 copper ethernet ports. This fiber ethernet converter takes most compatible sfp module also known as an sfp transceiver and will be a great unmanaged switch that you can set and forget.