Best Ubiquiti Networks Networking Transceivers in 2026

UPC: 817882022729

Weight: 1.350 lbs

Used indoors for speeds up to 1 Gbps

Compatible with Ubiquiti Networks UF-RJ45-1G, Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.

10/100/1000BASE-T SFP to RJ45 Copper for Category 5e copper wire. Gigabit SFP to RJ45 Copper Module 10/100/1000M Auto-Negotiation. Compliant with MSA standards. RJ45 connector. Reach 100m.

Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function.

10GBase-CU, SFP+ to SFP+ Connetor, Passive, 1 meters, 30AWG;

Compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc.

All products are passed by TDR & VNA tests in our Signal Integrity Lab.

10GBase-CU, SFP+ to SFP+ Connetor, Passive, EEPROM I2C, 0.5 meters (1.64ft), 30AWG, Black, 1 Pack.

Compatible with Cisco, Meraki, Ubiquiti, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Quanta, Solarflare, PaloAlto, F5, etc.

All products are passed by TDR & VNA tests in our Signal Integrity Lab.

Fiber Port: 550-m SFP transceiver included (1.25G, multimode, 850-nm)

Fiber Type: SFP MMF, Dual LC

RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover

SFP Passive DAC Patch Cable

Ultra-thin OD 4.2 mm (30 AWG)

Length: 0.5 m

✅10GBase-SR SFP+: 10 Gigabit Ethernet Multimode SFP+ Module, 10 Gb/s, 850nm wavelength, Duplex Dual LC, MMF, operates on multi-mode (OM3/OM4) LC/UPC fiber cable spans of up to 300m (984 Ft) in length. 2 Pack.

✅Wide Compatible: For Ubiquit UF-MM-10G, Unifi, Mikrotik, Netgear, D-Link, TP-Link and Other Open Equipments with 10G SFP+ Port.

✅Hot-swappable: PLUG and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP+ MSA and SFF-8431 Compliant, IEEE 802.3ae-compliant.

Multi-mode fiber

1.25 Gbps SFP

550 meter cable distance

✅Multi Rate: 1.25Gb/2.5Gb/5Gb/10base-T Transceiver Support 10Gbase-R on host port，support 10Gbase-T / 5Gbase-T /2.5Gbase-T /1000Gbase-T on line port. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant. 2 Pack.

✅RJ-45 Connector: 10Gb SFP+ to RJ45 Ethernet Copper Module supports 10 Gigabit over Cat 6a/7/8 cable, up to 30 meters (98ft). Supprots 5Gb/2.5Gb rate over Cat 5e cable or better,up to 50 meters (164ft). Supprots 1000M rate over Cat 5e cable or better,up to 100 meters (328ft).

✅Wide Compatible: For Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Meraki, MikroTik, TP-Link TL-SM5310-T, Netgear AXM765, D-Link, Broadcom, QNAP, Linksys, Supermicro, Edge-core, EMC, F5, Norkia, QTC, Supermicro and Other Open Switches with 10G SFP+ Port.

10Gb/s, 10GBase-LR SFP+ Transceiver, 1310-nm, Dual LC Connectors, reach up to 10km transmission over single-mode fiber.

Widely compatible with Cisco, Meraki, Ubiquiti UniFi, Mikrotik, Fortinet, Netgear, D-Link, Supermicro, TP-Link and other open switches.

Plug and Play, Hot Pluggable SFP+ MSA Compliant, Compliant with IEEE 802.3ae.

✅【10PCS 10GBase-SR SFP+ Module】Data Rate:10G, Interface:full-duplex LC connector,Multi-Mode SFP+ Module,850nm, Reach:up to 300m using multi-mode fiber cable (OM3/OM4).

✅【Wide Compatibility】For Cisco SFP-10G-SR, Ubiquiti UF-MM-10G,Meraki MA-SFP-10GB-SR, Mikrotik, Fortinet, Netgear, D-Link, TP-Link and Other Open Switches.

✅【High quality raw materials】It adopts the high quality of raw materials, and to ensure product reliability and enhances the service life.

ETHERNET OVER FIBER EXTENSION: Use this full duplex LC fiber media converter to convert and extend different networks over a Gigabit fiber cable connection up to 550m / 1804 ft.

INCLUDES SFP: For added convenience, this IT-grade network fiber media converter includes an SFP transceiver, enabling an 850nm LC multimode Gigabit fiber connection.

PLUG AND PLAY: Designed for ease of use, this LC fiber media converter has LED indicators for simple monitoring and quick & easy setup. It can be used as a standalone device or wall mounted.

1GBase-CU, SFP to SFP Connector, Passive, 0.5m (1.64ft), 30AWG, 1 Pack

Compatible with Cisco, Meraki, Ubiquiti, Mikrotik, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Quanta, Solarflare, PaloAlto, F5, etc

All products are passed by TDR & VNA tests in our Signal Integrity Lab

📡【 Fast & Stable Signal Transmission 】- This 10G(compatible 1.25G/2.5G/5G/10G) SFP+ RJ45 copper module connect with network router, server or switch. It transmits data up to 10Gb/1000Mbps transfer speed for max distance 30m with CAT6A/CAT7 cable.

📡【 Wide-Compatibility 】- The 10GBase-T SFP+ to RJ45 Transceiver fully compatible with Cisco SFP-10G-T-S/Meraki MA-SFP-10G-T, Netgear, Ubiquiti, Supermicro, Linksys, QNAP, Unifi, Broadcom, D-Link, TP-Link and other open switches, and used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 10Gb SFP+ transceiver ports.

📡【 Fully Hot-Swappable 】- Plug the SFP+ transceiver into your network device without a potentially costly 10Gbps network shutdown or device reboot, the copper module comes with a convenient bail clasp latch for removing.

Multi Data Rate for RJ45: 1.25Gb/2.5Gb/5Gb/10GBase-T. Cable Type: CAT.5e/6a/7/8 cable. Allows for data transmission at different rates and distances, with a maximum distance of 30 meters using 10Gbps, up to 50 meters using 5Gbps or 2.5Gbps, and a maximum distance of 100 meters for 1000Mbps. SFF-8431 and SFF-8432 MSA Compliant, IEEE 802.3az Compliant.

Wide Compatibility - The 1.25/2.5/5/10G-T SFP+ RJ-45 transceiver fully compatiable for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Mikrotik, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Linksys, QNAP, Unifi, Broadcom EMC, F5, Meraki MA-SFP-10G-T, Norkia, QTC and other open switches, and used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 10Gb SFP+ transceiver ports.

Plug and Play - Fully hot-swappable. Instantly use without any configuration, operating temperature range: 0℃ to 70℃, Single +3.3V power supply, RoHS compliant and lead-free. Plug the SFP+ transceiver into your network device without a potentially costly 10Gbps network shutdown or device reboot, the copper module comes with a convenient bail clasp latch for removing.

Original brand product.

Two-year warranty against factory defects.

Ubiquiti Networks UACC-OM-MM-10G-D-2 Network transceiver Module Fiber, W127028467 (transceiver Module Fiber Optic 10000 Mbit/s 850 nm)

UACC-OM-MM-10G-D-2

2-Pack

100% PALO ALTO NETWORKS LX COMPATIBLE SFP TRANSCEIVER: Designed, programmed and tested to work with compatible Palo Alto Networks switches and routers to deliver dependable 1GbE connectivity

TECHNICAL SPECS: 1000BASE-LX | 1Gbps | Single Mode (SMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi)

TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Palo Alto Networks routers and switches; DDM support reports the transceiver's status to most SNMP network management tools

Product Type: Computer Input Device

Package Quantity: 1

Package Dimensions: 2.3 cms (L) x 7.6 cms (W) x 10.4 cms (H)

Fully Compatible- for almost all Ubiquiti Unifi Ufiber 10G Gigabit Ethernet Switches, Servers, Routers, NICs on 10GBASE-T standards max distance up to 80 meters, the EEPROM data is unique coding and writing as Ubiquiti UF-RJ45-10G

10G-T SFP+80m-10GBASE-T SFP+ Transceiver Module supports 1/10Gbps up to 80m@Cat6a/Cat7 cable, RJ45 interface, hot pluggable,high quality broadcom chip, stainless steel material, anti-corrosion and salt spray resistance, stable performance, commercial operation temperature 32 to 158°F, 1.8W Power Consumption

Widely Compatible-for Open Sources brand including Ubiquiti Unifi UF-RJ45-10G, Netgear AXM765, Brocade 10G-SFPP-T, Finisar, Mikrotik, TP-link RJ45SFP+-TPL and Dlink DEM-440XT, Extreme 10338, Zyxel, Trendnet, Supermicro, Qnap, Linksys and other more. As we're sfp third-party manufacturer offering various of compatible options. If you are not sure about the compatibility of your devices, please question us or contact us

100% PALO ALTO NETWORKS SX COMPATIBLE SFP TRANSCEIVER: Designed, programmed and tested to work with compatible Palo Alto Networks switches and routers to deliver dependable 1GbE connectivity

TECHNICAL SPECS: 1000BASE-SX | 1Gbps | Multi Mode (MMF) | LC Connector | 850nm | Digital Diagnostic Monitoring (DDM) | Distances up to 550m (1804ft)

TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Palo Alto Networks routers and switches; DDM support reports the transceiver's status to most SNMP network management tools

10GBase-CU, SFP+ to SFP+ Connector, Passive, 3 meters (9.84ft), 26AWG, Black, 1 Pack.

Compatible with Cisco, Meraki, Ubiquiti, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Quanta, Solarflare, PaloAlto, F5, etc.

All products are passed by TDR & VNA tests in our Signal Integrity Lab.

📡 FLYPROFiber focuses on SFP to RJ45 trasceivers for 12 years. We produce high quality transceivers, every transceiver has been tested for 26 steps before shipping.

📡 This SFP to RJ45 Copper Module for Ubiqtui can be fully compatible with GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Netgear, Cisco, Supermicro, Linksys, QNAP, Unifi, Broadcom, D-Link, TP-Link and other open switches, and used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 1000BASE sfp ports.

📡 FLYPROFiber 1G SFP RJ45 Copper Module supports 1000BASE transfer speed for max distance 100m with CAT5A/CAT6 cable, 1000BASE SFP to RJ45 copper connector.

100% ARISTA NETWORKS AR-SFP-10G-T COMPATIBLE SFP+ TRANSCEIVER: Designed, programmed and tested to work with compatible Arista Networks switches and routers to deliver dependable 10GbE connectivity

TECHNICAL SPECS: 10GBASE-T | 10Gbps | Copper | RJ-45 Connector | Distances up to 30m (98.4ft)

TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Arista Networks routers and switches

100% EXTREME NETWORKS 10319 COMPATIBLE QSFP+ TRANSCEIVER: Designed, programmed and tested to work with compatible Extreme Networks switches and routers to deliver dependable 40GbE connectivity

TECHNICAL SPECS: 40GBASE-SR4 | 40Gbps | Multi Mode (MMF) | MPO Connector | 850nm | Digital Diagnostic Monitoring (DDM) | Distances up to 150m (492ft)

TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Extreme Networks routers and switches; DDM support reports the transceiver's status to most SNMP network management tools

W127041827