Best Flyprofiber in 2025

📡100M(3FT), OM3 LC-LC Fiber Optic Patch Cable Multimode 10Gb is designed for high density applications in gigabit ethernet, fiber channel, local area networks, data center, premise installation, wide area networks, commercial and so on, ideal for connecting 10G SR, 10G LRM, SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections.

📡Maximum Transmission Distance - 1Gb Ethernet Distance of 550Meters at 850nm; 10Gb Ethernet Distance of 300Meters at 850nm; 40Gb Ethernet Distance of 300Meters at 850/nm; 100Gb Ethernet Distance of 200Meters at 850nm. Bandwidth is 2000 MHz·km @850nm.

📡7.5mm Minimum Bend Radius - Corning US 50/125um Fiber and Cladding, which is Insensitive to bending, easy peeling, easy welding, ensures small optical loss and stable transmission (insertion loss≤0.3dB, return loss ≥30dB.), Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high-density installations with cables crammed into an extremely small footprint.

📡0.5M(1.6FT), OM3 LC-LC Fiber Optic Patch Cable Multimode 10Gb is designed for high density applications in gigabit ethernet, fiber channel, local area networks, data center, premise installation, wide area networks, commercial and so on, ideal for connecting 10G SR, 10G LRM, SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections.

📡Maximum Transmission Distance - 1Gb Ethernet Distance of 550Meters at 850nm; 10Gb Ethernet Distance of 300Meters at 850nm; 40Gb Ethernet Distance of 300Meters at 850/nm; 100Gb Ethernet Distance of 200Meters at 850nm. Bandwidth is 2000 MHz·km @850nm.

📡7.5mm Minimum Bend Radius - High Rated 50/125um Fiber and Cladding, which is Insensitive to bending, easy peeling, easy welding, ensures small optical loss and stable transmission (insertion loss≤0.3dB, return loss ≥30dB.), Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high-density installations with cables crammed into an extremely small footprint.

📡High Rated OS2 9/125μm Fiber and Cladding, which is Insensitive to bending,Easy peeling,Easy welding,ensures small optical loss and stable transmission. The core is Japan imports zirconia powder ceramics, which is High Return Loss,Low Insertion Loss,Low Attenuation feautures.

📡This LC to LC Single-mode Duplex OS2 fiber patch cords operate at -20ºC to +70ºC.Compatible with all standard fibre optic equipment and connectors,They are suitable for indoor use, if you need outdoor fiber, please send us an email.

📡15mm Minimum Bend Radius that is 4X more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint.

Rugged Outdoor Durability: The outdoor-rated construction of this cable features a UV-resistant and weatherproof jacket, ensuring long-lasting performance in harsh environments, including extreme temperatures, humidity, and exposure to sunlight.

Armored for Strength: Our LC fiber jumper cable is built with a stainless steel tube inside to protect the inner core (fiber glass) from damage caused by pets and other external factors. It is pressure-resistant, wear-resistant, and heat-resistant, making it ideal for outdoor use.

Space-saving Uniboot Connectors: Our LC duplex connector with uniboot is encased in a common housing with one boot, terminating on a single twin-fiber round cable. By using cable assemblies with LC Uniboot connectors, half of the space can be saved over traditional duplex cable. Uniboot single jacket patch cables make patch panel cable management considerably easier.

📡4M(13ft), OM2 LC-LC Fiber Optic Patch Cable Multimode 1Gb is designed for high density applications in gigabit ethernet, fiber channel, local area networks, data center, premise installation, wide area networks, commercial and so on. Used for LED laser network equipment such as SFP and GBIC transceivers, media converters, industrial Ethernet devices, and optical fiber NIC's, in gigabit ethernet 1000Base-LX, 1000Base-SX, or 10GBase-S/LR4/LRM.

📡Maximum Transmission Distance - 1Gb Ethernet Distance of 550Meters at 850nm. 10Gb Ethernet Distance of 82Meters at 850nm. Bandwidth is 500/500MHz.km @850/1300nm.

📡7.5mm Minimum Bend Radius - High Rated 50/125um Fiber and Cladding, which is Insensitive to bending, easy peeling, easy welding, ensures small optical loss and stable transmission (insertion loss≤0.3dB, return loss ≥30dB.), Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high-density installations with cables crammed into an extremely small footprint.

📡【 Fast & Stable Signal Transmission 】- This 10G SFP+ RJ45 copper module connect with network router, server or switch. It transmits data up to 10Gb/1000Mbps transfer speed (Does Not Support 2.5Gbps And 5Gbps), for max distance 30m with CAT6A/CAT7 cable.

📡【 Fast & Stable Signal Transmission 】- This 10G SFP+ RJ45 copper module connect with network router, server or switch, it transmits data up to 10Gb/1000Mbps transfer speed for max distance 30m with CAT6A/CAT7 cable. Please note that our 10G-T RJ45 Transceiver for Ubiquiti does not support 2.5Gbps and 5Gbps！

📡【 Fully Hot-Swappable 】- Plug the SFP+ transceiver into your network device without a potentially costly 10Gbps network shutdown or device reboot, the copper module comes with a convenient bail clasp latch for removing.

📡As a optical passive devices, FLYPRO Fiber attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave

📡LC/UPC singlemode fixed fiber optic attenuator 10dB,Polarization dependent loss ≤0.2dB and return loss ≥50dB

📡The fiber attenuator test system features high attenuation accuracy, low added loss and good stability

📡As a optical passive devices, FLYPROFiber attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave

📡LC/UPC singlemode fixed fiber optic attenuator 10dB,Polarization dependent loss ≤0.2dB and return loss ≥50dB

📡The fiber attenuator test system features high attenuation accuracy, low added loss and good stability

📡As a optical passive devices, FLYPRO Fiber attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave

📡LC/UPC singlemode fixed fiber optic attenuator 5dB,Polarization dependent loss ≤0.2dB and return loss ≥50dB

📡The fiber attenuator test system features high attenuation accuracy, low added loss and good stability

📡【 Fast & Stable Signal Transmission 】- This 10G(compatible 1.25G/2.5G/5G/10G) SFP+ RJ45 copper module connect with network router, server or switch. It transmits data up to 10Gb/1000Mbps transfer speed for max distance 30m with CAT6A/CAT7 cable.

📡【 Wide-Compatibility 】- The 10GBase-T SFP+ to RJ45 Transceiver fully compatible with Cisco SFP-10G-T-S/Meraki MA-SFP-10G-T, Netgear, Ubiquiti, Supermicro, Linksys, QNAP, Unifi, Broadcom, D-Link, TP-Link and other open switches, and used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 10Gb SFP+ transceiver ports.

📡【 Fully Hot-Swappable 】- Plug the SFP+ transceiver into your network device without a potentially costly 10Gbps network shutdown or device reboot, the copper module comes with a convenient bail clasp latch for removing.

📡 FLYPROFiber focuses on fiber optic trasceivers for 12 years. We produce high quality transceivers, every transceiver has been tested for 26 steps before shipping.

📡 This 10GBASE-SR Optics Multimode Module Cisco can be fully compatible with Cisco SFP-10G-SR/SFP-10G-SR-S, Netgear, Ubiquiti, Supermicro, Linksys, QNAP, D-Link, TP-Link, Asus and other open brand devices, widely used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 10Gb sfp+ ports.

📡 FLYPROFiber 10G SR MMF SFP+ Transceiver supports 10Gbs transfer speed for max distance 300m over OM3 MMF, 850nm wavelength.

📡The LC-FC Hybrid Fiber Optic Adapter is specially designed to incorporate the Small Form Factor LC into FC configured environment,like Visual Fault Locator(VFL), power meters, OTDRs, and other test equipments.

📡The compact design enables network operators to reduce cost via space-savings, and by eliminating hybrid cable assemblies. It's very lightweight due to their plastic bodies.

📡The zirconia ceramics provids high dimensional accuracy and good stability to work perfectly with fiber cable or test equipment.

📡As a optical passive devices, FLYPROFiber attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave

📡SC/UPC singlemode fixed fiber optic attenuator 7dB,Polarization dependent loss ≤0.2dB and return loss ≥50dB

📡The fiber attenuator test system features high attenuation accuracy, low added loss and good stability

📡As a optical passive devices, FLYPROFiber attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave

📡SC/UPC singlemode fixed fiber optic attenuator 7dB,Polarization dependent loss ≤0.2dB and return loss ≥50dB

📡The fiber attenuator test system features high attenuation accuracy, low added loss and good stability

📡As a optical passive devices, FLYPROFiber attenuators mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave

📡SC/UPC singlemode fixed fiber optic attenuator 7dB,Polarization dependent loss ≤0.2dB and return loss ≥50dB

📡The fiber attenuator test system features high attenuation accuracy, low added loss and good stability

📡 FLYPROFiber focuses on SFP to RJ45 trasceivers for 12 years. We produce high quality transceivers, every transceiver has been tested for 26 steps before shipping.

📡 This SFP to RJ45 Copper Module for Ubiqtui can be fully compatible with GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Netgear, Cisco, Supermicro, Linksys, QNAP, Unifi, Broadcom, D-Link, TP-Link and other open switches, and used in fiber switches, routers, NIC, media converters, servers and other fiber equipment with 1000BASE sfp ports.

📡 FLYPROFiber 1G SFP RJ45 Copper Module supports 1000BASE transfer speed for max distance 100m with CAT5A/CAT6 cable, 1000BASE SFP to RJ45 copper connector.

📡High Rated OS2 9/125μm Fiber and Cladding, which is Insensitive to bending,Easy peeling,Easy welding,ensures small optical loss and stable transmission. The core is Japan imports zirconia powder ceramics, which is High Return Loss,Low Insertion Loss,Low Attenuation feautures.

📡This LC to LC Single-mode Duplex OS2 fiber patch cords operate at -20ºC to +70ºC.Compatible with all standard fibre optic equipment and connectors,They are suitable for indoor use, if you need outdoor fiber, please send us an email.

📡15mm Minimum Bend Radius that is 4X more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint.

📡High Rated OS2 9/125μm Fiber and Cladding, which is Insensitive to bending,Easy peeling,Easy welding,ensures small optical loss and stable transmission. The core is Japan imports zirconia powder ceramics, which is High Return Loss,Low Insertion Loss,Low Attenuation feautures.

📡This LC to LC Single-mode Duplex OS2 fiber patch cords operate at -20ºC to +70ºC.Compatible with all standard fibre optic equipment and connectors,They are suitable for indoor use, if you need outdoor fiber, please send us an email.

📡15mm Minimum Bend Radius that is 4X more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint.

📡3M(10ft), OM4 LC-LC Fiber Optic Patch Cable Multimode 40/100Gb is designed for high density applications in gigabit ethernet, fiber channel, local area networks, data center, premise installation, wide area networks, commercial and so on, ideal for connecting 40G BIDI SR, 10G SR, QSFP+, SFP+ transceivers etc. for 10G/40G/100G Ethernet connections and is the preferred fiber specification for 40G/100G applications.

📡Maximum Transmission Distance - 1Gb Ethernet Distance of 550Meters at 850nm; 10Gb Ethernet Distance of 300Meters at 850nm; 40Gb Ethernet Distance of 300Meters at 850/nm; 100Gb Ethernet Distance of 200Meters at 850nm. Bandwidth is 2000 MHz·km @850nm.

📡7.5mm Minimum Bend Radius - High Rated 50/125um Fiber and Cladding, which is Insensitive to bending, easy peeling, easy welding, ensures small optical loss and stable transmission (insertion loss≤0.3dB, return loss ≥30dB.), Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high-density installations with cables crammed into an extremely small footprint.

➤Universal Compatibilty: BlueRigger optical audio cable is compatible with Soundbar, Home Theatre, HDTV, Game Consoles (Xbox, PS4 etc), Blu-Ray Player, DVR, DAC, Audio Processor, Receiver/Preamp etc. Compatible with Toslink, S/PDIF and optical ports

➤Solid Construction: Precision-polished 24K Gold plated optical connectors for optimal signal transfer and corrosion resistance. This protects against RFI & EMI interference. The slim connector design, allows for a snug and easy fit in the device

➤Durable and Secure Connection: Lightweight, flexible high quality PVC jacket for long lasting usage. This cable comes with removable rubber tips to protect the connectors from dust and prevents oxidation. NOTE: Please remove the protective cover before use

[PROTECT YOUR TOSLINK CABLE WITH BUILT-IN END CAPS] FosPowerâ€s toslink digital optical audio cable has built-in end caps to protect your connectors. No longer worry about broken connection points.

[INTERFERENCE FREE TOSLINK CABLE] No more Interference! Constructed from a high-quality fiber that completely eliminates RF, EM, and group loop interference.

[PREMIUM QUALITY DESIGN] Unlike others, FosPowerâ€s Toslink cable is designed with high-quality parts. With metal connections and a durable nylon mesh jacket this cable is optimized for maximum protection against wear and tear.

[PROTECT YOUR TOSLINK CABLE WITH BUILT-IN END CAPS] FosPowerâ€s toslink digital optical audio cable has built-in end caps to protect your connectors. No longer worry about broken connection points.

[INTERFERENCE FREE TOSLINK CABLE] No more Interference! Constructed from a high-quality fiber that completely eliminates RF, EM, and group loop interference.

[PREMIUM QUALITY DESIGN] Unlike others, FosPowerâ€s Toslink cable is designed with high-quality parts. With metal connections and a durable nylon mesh jacket this cable is optimized for maximum protection against wear and tear.

Perfect compatibility - Syncwire Optical Audio cable is compatible with standard and high-definition devices with Toslink (s/PDIF, Optical) ports. Perfect for the sound bar to receiver/preamp, Audio processor, DAC, TV and PS4, PlayStation, Xbox gaming systems etc.

Unparalleled sound quality - features Corrosion-Resistant, gold-plated connectors and buffer tubing for optimal signal transfer. Clear uncompressed PCM Audio and compressed 5.1 to 7.1 surround Sound.

Incredible durability - Syncwire Digital optical Audio cable Features a durable PVC outer layer for premium Quality and long usage.

Perfect for equipment with a TOSLINK interface (OPT In / OPT Out or S/PDIF In / S/PDIF Out. TOSLINK connector to TOSLINK connector (F05 connector)

Ideal for transmitting digital audio from your TV, video game console (PS3/PS4/Xbox One), DVD/Blu-ray player or TV streaming box to a soundbar, an amplifier/amp, or a stereo/Hi-Fi system, D/A converter, etc.

The fiber optic audio cable is completely immune to electrical interference thanks to its metal-free, flexible PVC cable. Each cable undergoes multi-stage quality tests for maximum product quality during manufacturing

[PROTECT YOUR TOSLINK CABLE WITH BUILT-IN END CAPS] FosPowerâ€s toslink digital optical audio cable has built-in end caps to protect your connectors. No longer worry about broken connection points.

[INTERFERENCE FREE TOSLINK CABLE] No more Interference! Constructed from a high-quality fiber that completely eliminates RF, EM, and group loop interference.

[PREMIUM QUALITY DESIGN] Unlike others, FosPowerâ€s Toslink cable is designed with high-quality parts. With metal connections and a durable nylon mesh jacket this cable is optimized for maximum protection against wear and tear.

➤Universal Compatibilty: BlueRigger optical audio cable is compatible with Soundbar, Home Theatre, HDTV, Game Consoles (Xbox, PS4 etc), Blu-Ray Player, DVR, DAC, Audio Processor, Receiver/Preamp etc. Compatible with Toslink, S/PDIF and optical ports

➤Solid Construction: Precision-polished 24K Gold plated optical connectors for optimal signal transfer and corrosion resistance. This protects against RFI & EMI interference. The slim connector design, allows for a snug and easy fit in the device

➤Durable and Secure Connection: Lightweight, flexible high quality PVC jacket for long lasting usage. This cable comes with removable rubber tips to protect the connectors from dust and prevents oxidation. NOTE: Please remove the protective cover before use

UNIVERSAL COMPATIBILTY: BlueRigger optical audio cable is compatible with Soundbar, Home Theatre, HDTV, Game Consoles (Xbox, PS4 etc), Blu-Ray Player, DVR, DAC, Audio Processor, Receiver/Preamp etc. Compatible with Toslink, S/PDIF and optical ports

SOLID CONSTRUCTION: Precision-polished 24K Gold plated optical connectors for optimal signal transfer and corrosion resistance. This protects against RFI & EMI interference. The slim connector design, allows for a snug and easy fit in the device

DURABLE AND SECURE CONNECTION: Lightweight, flexible high quality PVC jacket for long lasting usage. This cable comes with removable rubber tips to protect the connectors from dust and prevents oxidation. NOTE: Please remove the protective cover before use. CL3 rated for in wall installations

Perfect Compatibility - Syncwire optical audio cable is compatible with standard and high-definition devices with Toslink (S/PDIF, optical) ports. Perfect for the sound bar to receiver/preamp, audio processor, DAC, TV and PS4, Playstation, Xbox gaming systems etc.

Unparalleled Sound Quality - Features corrosion-resistant, gold-plated connectors and buffer tubing for optimal signal transfer. Clear uncompressed PCM audio and compressed 5.1 to 7.1 surround sound.

Incredible Durability - Syncwire digital optical audio cable features a durable PVC outer layer for premium quality and long usage.

Perfect for equipment with a TOSLINK interface (OPT In / OPT Out or S/PDIF In / S/PDIF Out. TOSLINK connector to TOSLINK connector (F05 connector)

Ideal for transmitting digital audio from your TV, video game console (PS3/PS4/Xbox One), DVD/Blu-ray player or TV streaming box to a soundbar, an amplifier/amp, or a stereo/Hi-Fi system, D/A converter, etc.

The fiber optic audio cable is completely immune to electrical interference thanks to its metal-free, flexible PVC cable. Each cable undergoes multi-stage quality tests for maximum product quality during manufacturing