Best Opstran in 2026

Fully Compatible- for almost all Cisco 10G Gigabit Ethernet Switches, Servers, Routers, NICs on 10GBASE-T standards, the EEPROM data is unique coding and writing as Cisco SFP-10G-T SFP-10G-T-S SFP-10G-T-X.

10 Pack 10G SFP+RJ45 30m-10GBASE-T SFP+ Transceiver Module supports 1/10Gbps up to 30m@Cat6a/Cat7 cable, 10G SFP+ to RJ-45 copper connertor, high quality broadcom chip, stable performance, commercial temperature range from 0 to 70°C (32 to 158°F), 1.8W Power Consumption

Application-It's widely used on Cisco brand and other more open source 10G switches, servers, routers, network interface card (NICs) and other transmission equipment for Enterprise LAN Networks in data center and other cooper networking connections with 10Gb sfp+ ports. Compliant with IEEE 802.3an, IEEE 802.3az, SFP+ MSA, SFF-8431

99% Compatible- for almost all Dell and Dell Force10 10G Gigabit Ethernet Switches, Servers, Routers, NICs on 10GBASE-T standards, the EEPROM data is unique coding and writing as Dell Foce10 GP-10GSFP-T

10G SFP+RJ45 30m-10GBASE-T SFP+ Transceiver Module supports 1/10Gbps up to 30m@Cat6a/Cat7 cable, 10G SFP+ to RJ-45 copper connertor, high quality broadcom chip, commercial temperature range from 0 to 70°C (32 to 158°F), 1.8W Power Consumption

Easy to install-It supports real-time configuration, plug and play, hot pluggable sfp footprint. It doesn't require any setup or installation for either device. It greens up immediately and connects right away. When install sfp, please rotate the latch down at a 90 degree to unlock your sfp transceiver. Attention not to look directly into the sfp interface when it's plugged in the network device

Fully Compatible- for almost all Ubiquiti Unifi Ufiber 10G Gigabit Ethernet Switches, Servers, Routers, NICs on 10GBASE-T standards max distance up to 80 meters, the EEPROM data is unique coding and writing as Ubiquiti UF-RJ45-10G

10G-T SFP+80m-10GBASE-T SFP+ Transceiver Module supports 1/10Gbps up to 80m@Cat6a/Cat7 cable, RJ45 interface, hot pluggable,high quality broadcom chip, stainless steel material, anti-corrosion and salt spray resistance, stable performance, commercial operation temperature 32 to 158°F, 1.8W Power Consumption

Widely Compatible-for Open Sources brand including Ubiquiti Unifi UF-RJ45-10G, Netgear AXM765, Brocade 10G-SFPP-T, Finisar, Mikrotik, TP-link RJ45SFP+-TPL and Dlink DEM-440XT, Extreme 10338, Zyxel, Trendnet, Supermicro, Qnap, Linksys and other more. As we're sfp third-party manufacturer offering various of compatible options. If you are not sure about the compatibility of your devices, please question us or contact us

『99% Compatible』for HP X121 1G SFP RJ45 Transceiver, especially for HPE Aruba and HPE ProCurve Networks gigabit ethernet 1000BASE-T standards, coding and writing as HP ProCurve J8177A/ J8177B/ J8177C/ Aruba J8177D J8177DCM JL747A

『1G SFP RJ45』1000BASE-T SFP Fiber Optic Transceiver Module over Cat5 Cable, 1.25Gb/s Copper SFP, 100 meters, 1.25Gbps, SFP to RJ45 connector, hot and play, auto-negotiation, MSA Compliant, IEEE STD 802.3 and 802.3ab, 0 to 70°C (23 to 158°F)

『Application』 It's able to use on all HPE ProCurve Series and HP Aruba Series 1000BASE-T 1.25Gigabit Ethernet 1G switches, Servers, Routers, NICs and other transmission equipment for Enterprise LAN Networks in data center and other cooper networking connections, and are rigorously tested to ensure reliable performance that meets or exceeds industry standards, while the information displayed may slightly vary from the original products.

100% Compatible- for almost all HPE Aruba and HPE ProCurve 10G Gigabit Ethernet Switches, Servers, Routers, NICs on 10GBASE-T standards, the EEPROM data is unique coding and writing as Aruba JL563A

10G SFP+RJ45 30m-10GBASE-T SFP+ Transceiver Module supports 1/10Gbps up to 30m@Cat6a/Cat7 cable, 10G SFP+ to RJ-45 copper connertor, high quality broadcom chip, commercial temperature range from 0 to 70°C (32 to 158°F), 1.8W Power Consumption

Easy to install-It supports real-time configuration, plug and play, hot pluggable sfp footprint. It doesn't require any setup or installation for either device. It greens up immediately and connects right away. When install sfp, please rotate the latch down at a 90 degree to unlock your sfp transceiver. Attention not to look directly into the sfp interface when it's plugged in the network device

Fully Compatible- for almost all Ubiquiti Unifi Ufiber 10G Gigabit Ethernet Switches, Servers, Routers, NICs on 10GBASE-T standards, the EEPROM data is unique coding and writing as Ubiquiti UF-RJ45-10G; and also wide Compatible for all Open Sources brand including Netgear AXM765, Brocade 10G-SFPP-T, Finisar, Mikrotik, TP-link RJ45SFP+-TPL and Dlink DEM-440XT, Extreme 10338, Zyxel, Supermicro, Qnap, and other more.

AC600 Nano size wireless Dual band USB Wi-Fi adapter for fast and high speed Wi-Fi connection.

Strong 2.4G/5G connection allows the user to use the Internet with lag-free experience.

Sleek and miniature sized design allows the user to plug and leave the device in it's place.

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 10/100/1000M

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Data Rate: 1.25Gb/s

Interface: RJ-45; Cable Type: CAT.5e

Reach: up to 100 meters transmission over CAT.5e

Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with multimode LC for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications

Compatible with MSA compliant equipment from Cisco, Ubiquiti, TP-Link, Huawei, Mikrotik, Netgear, Supermicro

Low power consumption and low EMI emission design; Hot-pluggable with advanced ESD protection

Data Rate: 1.25Gb/s

Wavelength: 850-nm; Reach: up to 550 meters

Fiber Type: Dual LC OM3 multi-mode fiber

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.3-Meter(1ft), 30AWG.

10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High-Performance Computing.

Widely compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices.

Data Rate: 1.25Gb/s

Wavelength: 850-nm

Reach: up to 550 meters; Fiber Type: Dual LC OM3 multi-mode fiber

10GBase-CU, 2 Meter

2-pair differential twinax cable, Passive, EEPROM I2C

Compatible with Cisco SFP-H10GB-CU2M, Ubiquiti, Fortinet and more

Data Rate: 1.25Gb/s

Wavelength: 850-nm; Reach: up to 550 meters

Fiber Type: Dual LC OM3 multi-mode fiber

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 3-Meter(10ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.

Compatible with Cisco, Fortinet, Cisco Meraki, D-link, Supermicro, Mikrotik, Netgear, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.

Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG.

SFP+ Cable can connect switch, router, server, NIC or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network and High Performance Computing.

Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices.

UPC: 817882022729

Weight: 1.350 lbs

Used indoors for speeds up to 1 Gbps

10GBase-CU, SFP+ to SFP+ Connetor, Passive, 1 meters, 30AWG;

Compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc.

All products are passed by TDR & VNA tests in our Signal Integrity Lab.

Fiber Port: 1.25G, SC, 1310-nm

Fiber Type: SMF, Dual SC

RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover

10 GbE high bandwidth cable connects a switch, server, NIC, or transceiver for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications such as Fibre Channel, InfiniBand, and SONET

Passive SFP+ cable connects equipment up to 7 meters for high density networking environments with Top of Rack (TOR) or Middle of Row (MOR) switching requirements; Low power consumption SFP+ twinaxial cable provides a cost-effective fiber alternative to installing fiber transceivers and cables to connect a 10G network

SFP+ Small Form Factor Pluggable Plus cable is hot pluggable with an SFP+ 20-Pin connector; Quick release latch provides a secure connection until the release tab is pulled

【Convert Fiber to Ethernet】Designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa.

【Versatile Compatibility】Works with both single-mode and multi-mode fiber SFP modules and is fully compatible with 10/100/1000 Base-T Ethernet connections.

【Easy to Use】Plug and play with no software installation or configuration needed.

10 GbE high bandwidth cable connects a switch, server, NIC, or transceiver for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications such as Fibre Channel, InfiniBand, and SONET

Passive SFP+ cable connects equipment up to 7 meters for high density networking environments with Top of Rack (TOR) or Middle of Row (MOR) switching requirements; Low power consumption SFP+ twinaxial cable provides a cost-effective fiber alternative to installing fiber transceivers and cables to connect a 10G network

SFP+ Small Form Factor Pluggable Plus cable is hot pluggable with an SFP+ 20-Pin connector; Quick release latch provides a secure connection until the release tab is pulled

Fiber Port: 40-km SFP transceiver included (1.25G, singlemode, 1310-nm)

Fiber Type: SFP SMF, Dual LC

RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover

Data Rate: 10G

Wavelength: 850-nm; Reach: up to 300m

Fiber Type: Dual LC OM3/OM4 multi-mode fiber