Best Cermant in 2026

Product Name : PCB Terminal Block;Model : 5.08-6P;Material : Plastic

Rated Value : AC 300V 10A 28-12AWG.

Pin Number : 6 Pin . Distance : 5.08mm/0.2"

Terminal Pitch:15EDG 3.81mm plug-in terminal block

Pin Number: 3，Rated Value: 300V 8A，Wire range: 28-16AWG，Color: Green

The pluggable terminal are made of high-quality materials, which are strong and durable. The highly insulated and flame-retardant shell can be used safely and reliably

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life

These resistor kits including 130 different values:1Ω-3MΩ,to fulfill your variety requirement

Power : 1/2 w(0.5w) , Tolerance : ±1%, Diameter : 3mm, ilm Length : 9mm, Axial leads end : 25mm, 1300 Pieces Metal Film Resistor

Product Name : PCB Terminal Block;Model : 5.08-2P;Material : Plastic

Rated Value : AC 300V 10A 28-12AWG;

SIZE: 2Pin Distance : 5.08mm/0.2"

Pcb prototype board, the proto boards are in the color of Red

Material: 94HB Bakelite Prototyping Board

FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on.

Signal voltage at drive end: 3.6-24V

Output voltage range: 3.6-30V (the output current depends on the specific situation but not 10mA, and the total power is inversely proportional to the voltage and current)

The jumper cap can realize whether the output terminal is a high potential output or a pull-down output.

The VLT6 is a revolutionary tilting TV mount. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt range.

The VLT6 extends from the wall 5.7", getting you the maximum tilt possible for your TV. The extension allows even the largest of TVs to achieve the maximum listed tilt range. More tilt translates to better glare reduction, think a better viewing experience.

Open wall plate design, allows for the VLT6 wall mount to be directly mounted over electrical outlets for a clean and streamlined look.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Assembly for Solar Combiner or Power Distribution

UL 600V Rating

UL 6-20 AWG Rating

Four connections with1/4" stainless steel studs and 3 x #8 stainless steel screws. Comes with 1/4” and #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal block that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

【Safety】Terminates 28-12 AWG；Rated Voltage: 250V/4KV; Rated Current: 32A. Long life, no corrosion, aging resistance, pressure resistance, high temperature and normal work. There is a test hole on the back of the compact splicing wire Connector. Test holes can be used to check if the wires are energized.

【Efficient】 No tools required in use, one plug can be used, greatly reducing the wiring work time. In fact, for home decoration, after the vertical connection terminal technology, each wire connection will save the wire length of about 500px , saving more than 80% of working hours, the comprehensive cost is greatly reduced.

【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances.

Fourteen connections with 2 x 5/16" stainless steel studs and 12 x #8 stainless steel screws. Comes with 4 x 8AWG 5/16”, 4 x 10AWG 5/16”and 24 x #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC

Four connections with M5 stainless steel studs and 3 x #8 stainless steel screws. Comes with 1/4” and #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

Two 5/16" stainless steel studs with divider for Positive and Negative connections. Comes with 2 x 4AWG & 2 x 8AWG 5/16” ring terminals, and stainless steel screws.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

Two connections with 5/16" stainless steel studs and 1 x #8 stainless steel screws. Comes with 8AWG 5/16” ring terminals, #8 insulated ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC. Max intermittent: 20A per connection

Two connections with M5 stainless steel studs and 5 x #8 stainless steel screws. Comes with 1/4”, #8 insulated ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Five connections red busbar with 5 x 3/8" stainless steel studs. Five connections black busbar with 5 x 5/16" stainless steel studs. Comes with 5 x 8AWG 3/8”, 5 x 8AWG 5/16” ring terminals.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

PCB Board: 30 pieces double sided PCB prototype boards in 4 different sizes, 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards

Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector

Screw Terminal Block: 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A

STRENGTH MATTERS:A product is only as good as the materials it’s made from.The eyelet terminals are made of 100% copper that has been annealed.Provides maximum conductivity.Achieve rock-solid connections.

BUILT LIKE A TANK:The copper ring terminals surface with tinned and passivation treatment to improve conductivity.The good-quality and high-purity copper determines that it has more wear-resistant, durable and anti-corrosion properties than ordinary copper wire lugs.Even in the small details,this copper lugs stands out from the crowd - The flared design allows for visual inspection of correct insertion,making wire insertion easier.

LONG TERM RELIABILITY:Tested to UL Listed and ABYC safety standards.The haisstronica's eyelet terminals can handle voltages up to 600 Volts at 275 Degrees F.and higher currents than common copper lugs amps.Why? Because whether your working on a car,truck,boat,or RV,you what to know that your equipment can handle whatever you throw at it.

【UL Listed】 Long life, no corrosion, aging resistance, pressure resistance, high temperature and normal work. There is a test hole on the back of the connector. Test holes can be used to check if the wires are energized.

【Efficient】 No tools required in use, one plug can be used, greatly reducing the wiring work time. In fact, for home decoration, after the vertical connection terminal technology, each wire connection will save the wire length of about 500px , saving more than 80% of working hours, the comprehensive cost is greatly reduced.

【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances.

Two Blocks of Each Color

UL 600V Rating

UL 12-22 AWG Rating

Fits 42"-90" TV's

Holds up to 125lbs

Tilts -12deg -7deg

76PCS TINNED BATTERY CABLE ENDS KIT:This 3/8",5/16" ring eyelet terminals kit includes 36pcs battery terminals will work with 8,6,4,2gauge wires.40pcs 3:1 heat shrink tube(red/black).

APPLICATION:Wiring projects such as Christmas lights,ships with high waterproof requirements,off-road vehicles,ship bottom pumps, lawn tractors,RVs,fish finder,etc.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!

EXCELLENT CRAFTSMANSHIP COPPER RING TERMINALS:The flaring design of the battery terminals makes it easy to insert the wires and complete the crimping and can firmly crimp the cable.Tested to UL listed and ABYC safety standards.

★【What You Get】 - In this terminal block set,it include 6pcs 4 positions 600V 15A double row screw terminal strip blocks with cover,6pcs 400V 15A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors,1pc screwdriver.Total 73pcs packed in a bag.

★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4 individual connections or by using the whole barrier bar or part of it up to 4 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.

★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable.

Wire Connectors, Industry standard twist on connector. - 500 Pack.

Wire Combination Max: (4) 16 AWG w/ (1) 20 AWG.

Wire Combination Min: (1) 18 AWG w/ (1) 20 AWG.

Corrosion Resistant 3/8" Stainless Steel Studs

3 Additional 20 Amp Screw Terminals for Smaller Wires

Nickel Plated Brass Bus-Bar and Stainless Steel Hardware for Increased Current Transfer

The Retrozone RZ3-1M 24 vac 2 wire spring return damper motors are designed as drop in replacements for Honeywell's M847D series motors on popular ZD and ARD dampers, including M847D1004, M847D1012, and other M847D series motors.

These motors also replace most Honeywell 2 wire normally open, power to close spring return motors, as well as many other brands

These motors are also replacements for the Hansen 135-6 motor, as well as other brands with the same footprint.