Best Mg Chemicals Desoldering Wicks in 2026

Oxide-free clean copper

Static free bobbins

Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes

Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board

100% copper wick has fine braid design to promote strong capillary action to pull in excess solder

High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand

Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs

High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable

🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more

🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs

🌟This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.

Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.

Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.

Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.

【Easy to Use Solder Sucker】Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.

【Desoldering Wick with Copper Braid】2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.

【Premium Desoldering Pump】The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.

Price For: Each Braid Material: Copper Width: 2mm Length: 5ft Braid Color: Green Braid Size: #3 Features: Packaged in ESD-Safe Static-Dissipative Bobbin Flux Type: Rosin Activated RA Leaded Process Compatible: Yes RoHS Compliant: Yes

Country of Origin:United States

Package dimensions:15.24"L x 7.62"W x 0.51"H

1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.

2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.

3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.

What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs

No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards

Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency

Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement

Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing

Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents

High quality desoldering braid with unique no clean flux and gemetrically- precise weave

Pure oxygen free copper wire with 0.1"W x 5'L, weight 0.4oz

Excellent thermal transfer for faster, safer desoldering using lower temperature irons

Product type :MECHANICAL COMPONENTS

Package dimensions :16.51 cm L x8.89 cm W x1.016 cm H

country of origin :United States

10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.

High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.

Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.

Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it

Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency

Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work

【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.

Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.

✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux.

✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs.

✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process.

High quality desoldering braid with unique no clean flux and gemetrically- precise weave

Pure oxygen free copper wire with 0.1"W x 5'L, weight 0.4oz

Excellent thermal transfer for faster, safer desoldering using lower temperature irons

☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks

☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick

☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder.

Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!

Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily

The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free

High Quality Flux - Get the soldering results you desire with a quality electronics flux. SRA #135 No Clean paste makes soldering easier. Simply dip wires or apply to PCBs for fast wetting action.

Keep it Tinned! - Proper iron tip maintenance is crucial to reliable and effective soldering. Stop wasting solder wire and try tip tinner to prevent your tips from turning black with flux residue.

Soldering Wick - Removing electronic components can be difficult but a good flux makes the process a bit easier by efficiently wicking the residual solder from the joint into the copper weave.

Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it

Material: the desoldering wicks are made of Pure oxygen free copper wire , precise weaving design can improve the capillary effect.

Widely Used: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards.

【 Perfect Combo Accessories Kits for Solder Work 】----- 2 Packs Fine Tin Lead Rosin Core Solder Soldering Welding Iron Wire Reel with flux + 2 Packs Soldering wick sucker + 1 No-clean solder paste wax, widely use for Electronics devices Repair DIY Hobby Metalworking Welding

【 Alloy Parameters of the solder wire 】----- Tin 60%Sn / Lead 40%Pb, content 1.2% solder flux. Dia : 0.6mm, Weight : About 1.76oz/50garameters of the solder wire ----- Tin 60%Sn / Lead 40%Pb, content 1.2% solder flux

【 Low melting point Lead Solder Wire 374℉/190℃ 】----- High insulation resistance, flows well and heats evenly, reduced welding time; Good activity, stable performance, fast tinning; Forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction, the solder joints are bright and firm

Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction,the solder braid can quickly absorbed molten solder and left a clean working area.

Easy to use:the desoldering solder wicks can provide an easier way to correct mistakes on small PCB boardsand will not make damage to the board, clean small components, suitable for re-soldering and desoldering.

Package Contents of Solder wick:1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs

Flat Braid Preparation: Our tin solder wick is prepared with flat braid and soft design, which makes you easier to operate when you actually use it.

Fast Thermal Transfer: Solder wick can do fast thermal transfer, suitable for fast absorption, very easy to use and improve work efficiency.

Low Residue: Solder wick is very safe and low residue, suitable for all kinds of PCB and circuit boards.

High Quality Material-To ensure the quality,ShineNow Solder Wick is made of high purity and oxide free copper,it provides good thermal conductivity and better solder absorbtion

No Clean Desoldering braid-ShineNow SN-2030 soldering wick left very few residues and if there is any it is pcb safe,rohs approved,no need to clean.

Economical Desoldering braid-Our Desolder wick is as long as 10 feet, twice the length of normal 1.5m solder wicks and 2.0mm length is the most popular size,it is economical and very useful.

Package Includes: you will receive 3 pieces of pens, and 6 pieces of desoldering wicks, in total of 9 pieces, sufficient quantity and a considerate combination to meet your daily use and replacement needs

Suitable Size: the pen measures about 5.12 inches/ 13 cm in length, and the soldering wick is about 4.92 ft/ 1.5 meters long and different sizes at 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm wide, which is convenient to hold in hand; Please check the size carefully before purchasing

Quality Material: the solder wick is made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents