Best Lesnow in 2026

🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more

🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs

🌟This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.

1.High-quality material: Upholstery pins are made of rust-proof metal steel needles, which are rust-proof and corrosion-resistant to avoid long-term rust and stain the sofa bed skirt.

2.Easy to install: Screw into fabrics such as sofas along the direction of rotation of the twist pins without damaging the fabrics.

3.Good stability: Bed skirt pins adopt a spiral rotation design, and they are installed by rotating clockwise, and the fixing is not loose.

1. Wide range of uses：Desoldering pump is widely used in the electronics and electrical industries, suitable for precision small devices, integrated circuit pins, home appliance repairs, digital repairs, etc., efficient and portable to remove waste tin residue.

2. Ergonomic design: Desolder pump adopts aluminum alloy shell, the operation is not slippery, the grip is comfortable, and the use is convenient.

3. High-quality suction nozzle: Good solvent resistance, lightweight design, easy to carry, suitable for long-term use, and improve work efficiency.

🌟The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more

🌟This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.

🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

The Ideal Flux For Electrical And Electronic Repairs

Contains 2 Ounce In A "Hockey Puck" Jar

Formulated For Use With Tin/Lead And Lead-Free Alloys

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

√ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire

√ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)

√ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket

√ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire

√ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)

√ Flux content 1.8%，electrical soldering wire dia is 0.6mm (0.0235inch)，gross weight 100gram (0.22lbs),good size for pocket

(1) Kester 24-6040-0061 Spool, 1 Pound per Spool

Diameter - 0.062"Inch (1.50mm)

60% Tin / 40% Lead (Product contains Halogen)

(1) Kester 24-6337-0027 Spool, 1 Pound per Spool

Diameter - 0.031"Inch (0.80mm)

63% Tin / 37% Lead (Product contains Halogen)

tin 60% and lead 40%

Model Number: 24-6040-0053

Item Package Dimension: 2.599999997348" L x 2.599999997348" W x 2.399999997552" H

Specially repackaged by TekLine Supply

1-Ounce pocket size pack contains approx 27 feet of solder!

67/37 Tin/Lead is most common for electronics work

Oxide-free clean copper

Static free bobbins

Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)

Smooth action to dispense solder from the spool

Dual solder spools - Maximum 1 kg spool capacity for each tier

Item Package Dimension: 6.75" L x 4.5" W x 1.25" H

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

Made in the USA 1Lb Spool using only Virgin Material

60/40 is 60% Tin and 40% Lead

Melting Temperature of 360° - 376°F

Adjustable "electronic" closed-loop temperature control

Dial the temperature you want

Temperature control sensor in heater ensures consistent heat

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron

Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F)

Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating

Solder wire: solder wire with rosin core; It weighs 50 g/ 0.11 lb.

Relative parameters: the size of solder wire roll is 5.5 x 5.5 x 2.8 cm/ 2.17 x 2.17 x 1.1 inches.The diameter of the electrical soldering wire is 0.8 mm/ 0.031 inch; Sn/Pb: 63%/ 37%; Flux: 2.2%. The melting point of soldering iron wire is 183 degrees Celsius/ 361 degrees Fahrenheit.

Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly.

★ Fine rosin core solder.

★ Lower Melting Point: 361 F/183 C.

★ Wire diameter: 0.8mm. Gross Weight: 100g.

Lead-free solder wire: lead-free solder wire with rosin core; It weighs 100 g/ 0.22 lb.

Relative parameters: the size of solder wire roll is 5.5 x 5.5 x 2.8 cm/ 2.17 x 2.17 x 1.1 inches.The diameter of the electrical soldering wire is 0.6 mm/ 0.023 inch; Sn/Cu: 99.3%/ 0.7%; Flux: 2.2%. The melting point of soldering iron wire is 227 degrees Celsius/ 441 degrees Fahrenheit.

Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly.

Unleaded soldering with 2% rosin core made from 99% tin, 0.3% silver, and 0.7% copper; Nontoxic and lead-free; Fast melting and maximum wetting spread; No spattering and corrosion; Heat fatigue and oxidation resistant; Melts clean and flows smooth; Less slag and smoke;

Solder wire or estaño para soldar for electronic, electrical, printed circuit board, rc car, guitar, Led strip, drone, or jewelry soldering, wire splicing, stained glass, and DIY hobby applications

Easy to work with; Evenly distributed rosin core; No rosin flux application mess; Good electrical & thermal conductivity; Compatible with most soldering irons and equipment;

Tin Lead solder wire alloy content, Tin 60%-Pb 40% (Sn60Pb40), Flux 1.7%

High quality rosin core solder wire. The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth

Good soldering kit for electrical soldering

Superior fluxing ability

Instant wetting

After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes

Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board

100% copper wick has fine braid design to promote strong capillary action to pull in excess solder

Trigger-start ignition easily ignites the flame

Versatile webbed flame completes a variety of household projects, including small diameter soldering, thawing, melting and heat application

Use only with propane fuel, such as the Bernzomatic 14.1 oz. Propane Hand Torch Cylinder

TRIGGER START - Trigger start torch for ease of lighting, instant on/off trigger increases fuel savings.

DURABLE - Stainless steel burn tube, cast aluminum body, brass burn tip.

HIGH PERFORMANCE - Pressure regulation allows the flame to burn in any direction and ensures consistent performance.