Best Harris Brazing Flux in 2026

Active range 1050°F - 1800°F

1lb Jar

Made in USA

Active range 1050°F - 1600°F

Model Number: SSWF1

Item Package Dimension: 4.75" L x 4.75" W x 3.38" H

For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze

This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch

Active Temperature Range: 1400 to 2200 F (760 to 1205 C)

6.5 oz Flux

1 Troy Once (31 g) Solder

56% Silver

For brazing and welding cast and malleable iron and steel

For torch welding brass, bronze and copper

Working temperature 1200-1600F/650-870C

Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up

Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings

Balanced zinc and copper alloy

Package Weight: 0.01 pounds

Brinnell hardness: 100

Working temp: 700-750 degrees

Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod

Standard: The copper welding rods kit conforms to AWS A5.8

Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps

Low temperature, self-fluxing rod for use on aluminum and magnesium

700°F melting temperature

These aluminum rods come in an seven pack and are 18-1/8"

【MATERIAL】 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%.

【ADVANTAGES】Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces.

【PACKAGING】Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use.

Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks)

For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum.

For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron.

Sufficient Quantity to Use: the package comes with 40 pieces of brass rods for knife handles, enough to satisfy your crafting or repairing demands, bringing you much convenience

Appropriate Size for Processing: designed with a length of approx. 25 cm/ 9.85 inches and a diameter of approx. 2 mm/ 0.08 inches, the knife making handle pins are suitable for you to grip, store and carry around

Easy for Welding: the brazing rod is an ideal material for you to do welding work, such as sculpture welding, model welding, circuit board welding and so on, whose melting point is 2190 degrees Fahrenheit, serving as a nice helper for you

15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%; Phosphor (P): 4.8-5.2%; Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux.

Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!

Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006", Fluidity Rating: 3. The 15% silver contents greatly improve the performance of the brazing alloys, providing better wettability, higher strength and lower melting temperature. Consequently, making the welding fluids capable to flow deeply into the small brazing gap, providing higher strength and toughness of the welding joint, and reducing the brazing time.

High strength alloy used for gas brazing low carbon and low alloy steels

Used in applications require high tensile strength, greater than 45,000 psi

High silicon and manganese content eliminates the need for flux

Active range 1050°F - 1600°F

6.5oz. Bottle

Made in USA

White Creamy Consistancy

Contains 1 lb.

Excess flux can be removed with hot water

The product is 10PK 1/8"x18" ALU Rod

Easy to use

The product is manufactured in China

For brazing and welding cast and malleable iron and steel

For torch welding brass, bronze and copper

Working temperature 1200-1600F/650-870C

Material: The package includes 20PCS 5% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%; Phosphor (P): 6.5-7.0%; Copper (Cu): Rest. For the best results,

Standard: The BCuP-3 silver brazing rod containing 5% silver, is equivalent to the American standard AWS BCuP-3 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-1193 degrees Celsius.

Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 718-816℃, good fluidity during welding, molten metal can flow to small gaps

【APPLICATION】 Versatile and can be used for a variety of welding applications as well as DIY projects such as making whirligigs. Brass brazing rods is used for welding copper alloy, carbon steel and alloy steel. It can also be used as an inlaid carbide tool or DIY decorate. Note: Copper-zinc alloys are not suitable for argon arc welding.

【MATERIAL】 25 Rods 1/16" X 9.84" brass brazing wire are included in the package. The chemical composition of the brazing rods: Cu 59%~61%, Si 0.15%~0.35%, Sn 0.8%-1.2%, Pb 105mg/kg, Zn balance. Note: Welding needs to be done in an open place or outdoors. Please wear a protective mask to avoid damage from zinc gas.

【ADVANTAGES】Brazing temperature range: 1634-1661°F. Solidus: 1634°F, Liquidus: 1661°F. Tensile Strength: 130N/mm². HB: 100 N/mm2. Elongation%: 25%. Brass rods contain a small amount of tin and silicon, tin can improve the fluidity of the welding wire, silicon can effectively control the evaporation of zinc, eliminate pores, and get a good weld.

【Value Pack】 Each tube contains 40 pcs of bare solid brass brazing alloy rods, each rod is 1/16" in diameter and 14" in length. Total 1/2 lb or half pound valued pack. Great saving!

【Easy Flow Brazing Alloy】 Optimized formula of 59-61% Copper, 0.8-1.2% Sn Tin, 0.15-0.35% Silicon, Rest for Zinc. Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane gas welding torch set up;

【All-Purpose Filler Metal】Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings. This brass alloy is suitable to braze brass, bronze, low carbon steel, cast iron, nickel alloys and hard alloys parts, High Joint Tensile Strength up to 37700 PSI;

Occupational Health & Safety

Country of Manifacturer: United States

Manufacturer: Harris

Country Of Origin: United States

Model Number: SSWF1/2

Item Package Dimension: 2.8667" L x 2.925" W x 3.9" H

All-in-one Flux Cored Aluminum Brazing Alloy

Low temperature self-fluxing alloy ideal for brazing aluminum to aluminum or aluminum to copper.

Cadmium free zinc-aluminum brazing filler metal.

Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux

Formulated for high tensile strength and ductility

Smooth flowing

Active range 1050°F - 1600°F

1/4lb Jar

Made in USA

【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!

【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life.

【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs.

Price For: Each Tensile Strength (PSI): - Type: Flux Coated Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: Tube Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: - Item: Brazing Alloy Rod Material: Safety-Silv-56 Flux Coated Dia. (In.): 1/16 Length (In.): 18 Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51

Country of Origin (subject to change): United States

women capri pants cotton women capri pants with pockets women casual pants petite women casual pants for work women capri pants casual women capri pants plus size women capri pants for work women capri pants petite

capri pants for women plus size women capri pants high waist capri pants for women plus size black capri pants for women capri pants for women stretch linen capri pants for women white capri pants for women

women capris pants with pockets womens capris and cropped pants for summer elastic waist pants for women petite short elastic waist pants for women work women capris pants women capris pants plus size women capris pants high waisted

Upgraded Full Metal Cover Version, change old design's plastic knob to solid brass constructed knob.Better Performance, Thicker and Heavier for durability.Strong pencil flame to provide both working precision and optimized heat output, Max working temperature up to 1350℃, meets the most common needs for both professionals and DIY fans.

Smart sized, Easy to be used in any spaces, Manual ignition, torch run off MAPP, MAP Pro and Propane With recommended BLUEFIRE MAPP or other quality welding gas, this torch can easily handle soft soldering tasks, brazing copper tubing, thawing pipes, remove paint and tiles, wood working, melting, heating, and many other home and commercial purposes.Perfect tool for plumbing, air-conditioning, automobile repair and body works, Jewelry and beads making, DIY tasks, crafts and hobbies, and etc.

No Flux Needed:No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!