Best Harris Gas Welding Tips in 2026

Acetylene Cutting Tips Fit Harris Cutting Torch

Model: 6290 size: 1

Thickness: 15-25 Orifice: 1.2

Premium quality brand-new acetylene gas welding/brazing/preheating elbow tip 23A90 series for Harris hand torches. Pack of one 23A90 welding tip.

Tip thread 23/64"-26 (M). For welding or brazing using Acetylene.

Compatible mixers E-43, D-85, H-162E, V-W-1, V-W, as well as other aftermarket versions.

Size 0,1 and 2

One piece tip design

For use with oxygen & acetylene

Proudly Made in the USA and 100% Flame Tested

Provides a stable, concentrated flame even in windy conditions

Capable of brazing up to 1 1/2in of copper

READ THIS BEFORE YOU BUY:***These tips are compatible ONLY with Victor 100 Series Welding Torch Handles - These Tips WILL NOT FIT Victor Series "300" or Series "J" Handles***

READ THIS BEFORE YOU BUY: ***Check the picture Nº2 with the thread size and compare with your torch handle - If the thread size in Picture Nº2 does not match your Victor torch handle thread, Please search on Amazon the following ASIN Codes: B07CBZNGFV (Bigger Tips) and B0856TS3QQ (Smaller Tips)

Welding / Brazing Tip with Mixer Replacement for "100" Series Victor torch handles - Gases: Oxygen/Acetylene and Oxygen/Hydrogen

Five flames with 100% wrap around heat for easy brazing of copper tubing.

Capable of brazing up to 1" copper tubing.

Hook tip made of tough, durable stainless steel to protect against bending; mixer and nut are made from brass.

Heavy Duty Heating Tip/Nozzle/Rosebud with Mixer compatible with multiple Compatible with Harris Torch Handles - Carefully Check Picture #2 and Select the appropiate mixer that fits your torch.

Gases: Oxygen/Acetylene or Oxygen/Hydrogen

This is a general purpose heating nozzle with multi-flame head, ideal for heat treating, metal bending, caloric metal expansion, priming, etc. Manufactured in high-quality copper and brass. For safety, is always recommended to use flashback arrestors on the torch handle.

Premium quality brand-new one-piece type acetylene gas heating nozzle MFA series for Victor 300 series torches. Pack of one MFA nozzle.

Spiral mixer with double O-ring sealed to blend oxy-acetylene gas. Brass coupling nut with built-in snap ring. Total nozzle length: 12" (size 4 - size 8) and 17.5" (size 10). 65° elbow tip angle.

General purpose heavy duty multi-flame heating head for heat treating, straightening and priming with oxy-acetylene gas. Available nominal tip orifices: 4, 6, 8 and 10.

Proudly Made in the USA and 100% Flame Tested

Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit

Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc.

Series:6290,Size:1

Package:2 pcs of cutting tips included

General purpose tip with medium pre heat

Victor Style Gas Heating Tip/Nozzle, Medium Duty

For Oxy-Acetylene

Gas heating tips/nozzles are used to protect the quality of your welding or cutting

Heavy Duty Heating Tip/Nozzle/Rosebud Compatible with E-43 Mixer and 63-2, 18-5, 43-2 Compatible with Harris Torch Handles

Gases: Oxygen/Acetylene or Hydrogen

This is a general purpose heating nozzle with multi-flame head, ideal for heat treating, metal bending, caloric metal expansion, priming, etc. Manufactured in high-quality copper.

Premium quality brand-new Acetylene one-piece general purpose cutting tip 6290 series for Harris oxy-acetylene hand torch. Pack of 1.

Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5 and 6.

Medium preheat for hand/machine cutting use with Acetylene-Oxygen gas.

Premium quality brand-new Acetylene one-piece general purpose cutting tip 6290 series for Harris oxy-acetylene hand torch. Pack of 1.

Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5 and 6.

Medium preheat for hand/machine cutting use with Acetylene-Oxygen gas.

Premium quality brand-new Acetylene one-piece general purpose cutting tip 6290 series for Harris oxy-acetylene hand torch. Pack of 1.

Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5 and 6.

Medium preheat for hand/machine cutting use with Acetylene-Oxygen gas.

Package Dimensions: 1.524 H x 17.526 L x 5.588 W (centimetres)

General Fabrication

Package Weight: 0.045 kilograms

Package Dimensions: 6.9 H x 2.0 L x 2.0 W (centimetres)

General Fabrication

Package Weight: 0.06 kilograms

Package Dimensions: 2.032 H x 6.604 L x 1.905 W (centimetres)

General Fabrication

Package Weight: 0.022 kilograms

Package Dimensions: 1.8 cm (L) X 2.3 cm (W) X 8.1 cm (H)

Package Type: Mechanical Components

Package Quantity: 1

These tips are available with three different Mixer Models; E-43, D-85, and H-16-2E. Please Check Picture #2 and make sure you choose the right mixer that fits your torch handle. Select your option from the menu.

Before you buy, please check your torch handle and look for the model number, then compare it with Picture #2 of this listing. Not all Compatible with Harris torch handles use the same mixer

Mixer E-43 is Compatible with Torch Handles Models: 63-2, 18-5 and 43-2 - Mixer D-85 is Compatible with Torch Handle Model: 85 - Mixer H-16-2E is Compatible with Torch Handle Models: 16, 19-6, 19-6A, 50-9 and 50-36

Die Forged Brass Heavy Duty Torch Compatible with Harris. Torch handle compatible with E-43, E2-43, E3-43 and B-43-N Mixers.

Uses Series 6290 Cutting Tips Compatible with Harris

Includes one 6290-1 Acetylene Tip that can cut up to 3/4", one 23A90-0 Welding Tip and one J-63-1 Acetylene Heating Nozzle. (Thicker cuts, welds and heat capacities can be achieved with additional higher number tips)

Made in United States

Package height :9.2 cm

Package length :1.5 cm

1/2" - 25(M) Tube-Tip Thread

Occupational Health & Safety

Country of Manifacturer: United States

Manufacturer: Harris