Best Bluefire Brazing Rods in 2026

15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%; Phosphor (P): 4.8-5.2%; Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux.

Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!

Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006", Fluidity Rating: 3. The 15% silver contents greatly improve the performance of the brazing alloys, providing better wettability, higher strength and lower melting temperature. Consequently, making the welding fluids capable to flow deeply into the small brazing gap, providing higher strength and toughness of the welding joint, and reducing the brazing time.

5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%; Phosphor (P): 6.5-7.0%; Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux.

Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!

Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006", Fluidity Rating: 3. The 5% silver contents greatly improve the performance of the brazing alloys, providing better wettability, higher strength and lower melting temperature. Consequently, making the welding fluids capable to flow deeply into the small brazing gap, providing higher strength and toughness of the welding joint, and reducing the brazing time.

【Value Pack】 Each tube contains 40 pcs of bare solid brass brazing alloy rods, each rod is 1/16" in diameter and 14" in length. Total 1/2 lb or half pound valued pack. Great saving!

【Easy Flow Brazing Alloy】 Optimized formula of 59-61% Copper, 0.8-1.2% Sn Tin, 0.15-0.35% Silicon, Rest for Zinc. Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane gas welding torch set up;

【All-Purpose Filler Metal】Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings. This brass alloy is suitable to braze brass, bronze, low carbon steel, cast iron, nickel alloys and hard alloys parts, High Joint Tensile Strength up to 37700 PSI;

Superior Performance - Works at much lower temperatures (728 °F/387°C) than most comparable brazing alloy products, allowing you to repair and fabricate more aluminum and other non-ferrous parts.

Perfect Welding Results: strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent machinability.

Scope of Application:Works with aluminum, aluminum alloy, steel and iron, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals. Allowing you to apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane torch like the best metalwork enthusiasts do.

【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!

【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life.

【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs.

Upgraded Full Metal Cover Version, change old design's plastic knob to solid brass constructed knob.Better Performance, Thicker and Heavier for durability.Strong pencil flame to provide both working precision and optimized heat output, Max working temperature up to 1350℃, meets the most common needs for both professionals and DIY fans.

Smart sized, Easy to be used in any spaces, Manual ignition, torch run off MAPP, MAP Pro and Propane With recommended BLUEFIRE MAPP or other quality welding gas, this torch can easily handle soft soldering tasks, brazing copper tubing, thawing pipes, remove paint and tiles, wood working, melting, heating, and many other home and commercial purposes.Perfect tool for plumbing, air-conditioning, automobile repair and body works, Jewelry and beads making, DIY tasks, crafts and hobbies, and etc.

No Flux Needed:No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!