Best 8Milelake in 2026

Ideal for 4 wheel drive cars/trucks

Includes left and right handed thrust bolt assemblies

The kit includes 18 adapters which fit a variety of modern car brands

This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup

Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut

threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools

1/2 inches Deluxe Axle Nut Impact Sockets Set, 9pcs

Includes 29, 30, 31, 32, 33, 34, 35, 36 and 38mm sockets

Designed for removal or installation of axle nuts. Drive in. 1/2,

Remove steering wheels of most vehicles with or without telescoping tilt steering columns

Includes one forcing screw and four sets of cap screws needed for various thread requirements

Includes steering wheel puller

Forged steel construction: made for use on trucks with heavy duty chassis and a larger torsion bar

Work in safety: designed to hold the torsion bar while you make adjustments to your vehicle

DOES NOT FIT 2011+ Chevy / GMC 2500 / 3500 models, fits: 1988 to 2003 GMC and Chevrolet 1/2 (1500), 3/4 (2500) and 1-ton (3500) pickups, 1991 to 2001 Oldsmobile Bravada, the S-10 Blazer and S-15 Jimmy 4WD pickups with 4.3L V-6 engines Plus More. Does NOT fit the 2011+ HD models.

Test fuel pump output pressure to 10PSI

Read engine vacuum to 28

Comes with large 3-1/2 inches

【APPLICATION】This brake caliper piston compression tool is used for replacing brake pad, resetting brake piston, and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle.

【UNIVERSAL COMPATIBILITY】This multi-disc brake caliper wind back tool kit includes 10 adapters, 1 retainer plate, 1 right thrust bolt assemblies, it fits for hundreds of domestic and import vehicle.

【DURABLE MATERIAL】This brake pad and caliper service tool kit is made of durable steel, it has great wear and corrosion resistance. it can provide long service life.

Used for removing and installing oxygen sensors in many vehicles that are 7/8inches / 22mm in size

2pcs CR-MO Steel 6 Point Sockets

1pcs CR-V Steel 6 Point Socket

Professional Multi Use MacPherson Interchangeable Fork Spring Compressor Set

Compresses all types of MacPherson style coil springs front and rear.

Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm

【Water Pump Sprocket Holder Tool】The water pump sprocket holder tool can hold the timing chain in place so that the water pump can be removed for maintenance. The full-circle structure of the tool can well hold everything in place, avoid camshaft readjustment, and keep parts from falling into the timing chain cover.

【Material】The water pump sprocket retainer is made of high-quality carbon steel. Its high hardness makes it not easy to break and durable. The black anti-oxidation layer on the tool surface can effectively protect the tool and prolong its service life.

【Simple Operation】The full-circle sprocket holding tool has a special design and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain.

Tie Rod/ Pitman Arm Tool Kit Tie Rod Spreader with 11/16 inch Wedge Opening

Ball Joint Separator with 15/16 inch Jaw Opening Pitman Arm Wedge with 1.1/8 inch Opening

8 inch Handle for use with a regular hammer Handle with 0.401 inch Shank for use with an aim impact hammer

[APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively.

[EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case.

[DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life.

APPLICATION: This brake caliper piston compression tool is used for replacing brake pad, resetting brake piston, and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle.

UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 11 adapters, 1 retainer plate, 1 right thrust bolt assemblies, it fits for hundreds of domestic and import vehicle.

DURABLE MATERIAL: This brake pad and caliper service tool kit is made of durable steel, it has great wear and corrosion resistance. it can provide long service life.

Master deluxe custom bush, bearing and seal driver

The discs go from 18mm (25/32) all the way to 65mm (2-9/16") in 1mm increments plus 2-29/32" 74mm

All discs are connected with a 12mm shaft and screw which quickly connects to a 180mm 7-1/2" handle

Automotive fan clutch wrench for removing water pump on models with temperature dependent viscosity drive fans, removing lock nuts on the thermo-Viscous fans.

Fan clutch nut wrench includes two size, 32mm & 36mm, easy to use.

Auto fan clutch is made of high quality steel, which has strong hardness and not easy to be broken or bent. there is a layer of rubber in the middle part, rust-proof and does not hurt your hands.

10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen

Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome

Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2""

Gasoline engines 1.2 6V - 1.2 12V - 1.4 - 1.6 - 1.8 - 1.8T - 2.0 16V

Diesel engines 1.2, 1.4, 1.9, 2.0 TDI PD 1.7, 1.9D / TD / SDI / TDI 2.5 V6 TDI

Lock and Wrenches (SW6) for timing belt tensioner for 4-cylinder diesel engines, for example, VW Golf, Caddy, Touran, Touran from 2004

APPLICATION： The Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle

MATERIAL： Heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.

COMPATIBLITY： The Ball Joint tool compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints

Heat treated steel circlip pliers for large equipment repair

Spring ratchet locking mechanism to securely hold against snap ring tension

Internal pliers capacity 3-1/16 inch to 6-1/4 inch (78 mm to 159 mm) snap rings

4pcs MT2 shank Drive Spur Cup live center for woodworking lathe

This MT#2 Lathe Center Set is all you need to start spindle turning on your wood lathe.

Made from high quality steel, sturdy and durable.

0.39 inches Round Style shank chisels for heavy duty service work.

9 kinds of different shape Air Hammer Chisel, provided the needs of different jobs.

Excellent quality air hammer chisel, it can used with a pneumatic tool.

21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen

Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off

Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches

APPLICATION： The Front Wheel Hub Drive Bearing Removal Tool can easily replaces wheel bearings while keeping the steering knuckle and strut assembled on the vehicle. eliminating the need for front end alignment after service while reducing damage to the hub and bearings.

MATERIAL： Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.

COMPATIBLITY： Suitable for most front wheel drive cars, light trucks and vans

Applications: fit for Audi, fit for VW, fit for Skoda, and fit for Seat

Used for Locking the Camshaft, Crankshaft and Diesel Pump while setting the Timing Belt

Includes 2 Crank Locks, Sepertine Belt Tool, and a Tensioner Holding Pin

Bearing remover and install tools Can use for Domestic And Import Front Wheel Drive Car Truck

Accessories Included: Bushing: 2.16"(54.92mm) O.D. x 0.55"(14.01mm) Thicknes, 2.32"(58.93mm) O.D. x 0.55"(14.01mm) Thickness, 2.48"(62.95mm) O.D. x 0.55"(14.01mm) Thickness, 2.62"(66.49mm) O.D. x 0.55"(14.01mm) Thickness, 2.75"(69.75mm) O.D. x 0.55"(14.01mm) Thickness, 2.81"(71.41mm) O.D. x 0.55"(14.01mm) Thickness, 2.89"(73.46mm) O.D. x 0.55"(14.01mm) Thickness, 2.95"(75.00mm) O.D. x 0.55"(14.01mm) Thickness, 3.05"(77.55mm) O.D. x 0.55"(14.01mm) Thickness, 3.21"(81.46mm) O.D. x 0.55"(14.01mm) T

Sleeve [A-D]:4.03"(102.25mm) O.D. x 2.55"(64.65mm) Length, 3.61"(91.68mm) O.D. x 2.55"(64.65mm) Length, 3.41"(86.66mm) O.D. x 2.55"(64.65mm) Length, 3.00"(76.23mm) O.D. x 2.55"(64.65mm) Length

10 Pcs tool set servicing 15 different applications

For most motorcycles, dirt bikes & ATV,s

SIZES: M14x1.5 M16x1.5 M18x1.5 M26x1.0 M28x1.0 M25x1.5 M22x1.0

Pulls flange-type rear axles and most front-wheel drive hubs

Internal and external jaws provide a variety of combinations to pull bearings gears and seals

Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs

Practical - Use the Terminal Release/Remover Set to release the terminals from plastic connector housings on American, European and Japanese vehicles

Durable - Constructed with high-strength steel with a chrome finish for longevity and rust-resistance

Comfortable & Convenient Grip - Handles designed for extra grip and comfort; Each handle is individually marked for quick reference to included application chart

100 piece tungsten carbide router bit kit with 1/4inches shank - 2-blade bits on most bits

Precision ground cutting edges stay sharper - Heat treated shanks and bodies for durability

Bits for use on metal, wood, plastic and masonry - Controlled depth of cut minimizes kickback

Type:9L Capacity Manual Fluid Evacuator ;Fluid temperature range : 35°F- 200°F

Suction Probes: Ø4, Ø6, Ø8, Ø10,and 1pc of Ø4 brass probe) probe length 1M

Use to evacuate automotive fluids:engine and gear oil, transmission fluid, brake fluid, coolant