Best 9.Solutions in 2026

(2x) 1/4″-20 Female Thread

(2x) 3/8”-16 Female , (1x) 3/8”-16 Male Thread Thread

2.36" Jaw Opening

5/8" Pin

Clamping Range: 0 to 1.97"

Tightening Knob

5/8” stud with tapped 3/8” end

2.36" Jaw Opening

(2x) 1/4”-20 Female Thread , (2x) 3/8”-16 Female Thread

5/8" and 3/8"-16 tapped ends

Can Attach Multiple Pins Together

Weight: 0.12 lbs (each)

1-Set of 29.5" Long Rods

3/8"-16 Threads on Both Ends of the Rod

Includes One Rod Connector

Joins Two 5/8" Rods

Allows 360° Positioning

Weight: 0.35 lbs

Tilt-Adjustable Quick Mount Receiver

Weight: 0.12 lbs

Attaches to 9.Solutions Magnetic Quick Mount Receiver Interface

1/4"-20 Camera Screw Connector

Supports DSLR-Sized Cameras

Attaches to 9.Solutions Magnetic Quick Mount Receiver Interface

Can fit with any M10 or 3/8” rod

Clamping Range: 0 to 1.97"

Weight: 0.9 lbs

Jaws Open from 0.3 to 1.37"

(1x) 3/8” (10mm) Pass-thru Receptacle , (1x) 5/8” (16mm) Pass-thru Receptacle

Load Capacity: 11 lb

Socket to receive 5/8” round or Hexagonal studs

2.36" Jaw Opening

(2x) 1/4”-20 Female Thread , (2x) 3/8”-16 Female Thread

Grip Joint with 3/8" & 5/8" Receptacles

Clamping Range: 0 to 1.97"

Tightening Knob

Tough polymer construction will last for years

Includes 20 mini clamps

Perfect for smaller spaces

Clamping Capacity (in): 6-1/2

Throat Depth (in): 3-1/4

Clamping Pressure (lb): 300

Heavy-duty 6-inch long clamp has an actual maximum opening of 2.5 inches.

Thick spring material can ensure the product is durable.

Spring clip is made of nickel-plated steel, durable and anti-rust.

Fits into a 3/8” hole in the top of the auxiliary fence

Range of travel 1/2″-5-3/4″ (12mm to 146mm)

Allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the Clamp getting in the way.

Heavy-duty tempered-steel springs for fast, reliable opening and closing. Maximum clamping power equals 44 lbs.

Point of pressure always remain near jaw tips throughout the entire range of openings.

Nickel-plated steel jaws ensure longer tool life.

Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp

Size: approx. 9.5 x 6.5 x 3.8cm/ 3.7" x 2.56" x 1.5" (L*W*H). Holding capacity force: 198 lbs.

Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips

INCLUDES: (4) Hold Down Clamps for T-tracks/T-slots; (4) 5/16-Inch-18 thread 3-1/2-Inch long T bolts; (4) Washers; (4) 5/16-Inch-18 thread 5-star knobs

FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies

FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity

【Precise 90 degree angle clamps for woodworking】Our clamping square kit is made of high quality aluminum alloy and stainless steel clamps to ensure 90 degree accuracy. Anodized red surface,rust proof, durable and corrosion resistant.CNC machined for durability and years of use

【Easy to Use】 Simply place the 90 degree positioning square in the corner of the part and secure it with a set of wooden clips. It is easy to use and the woodpeckers tools have beveled edges that won't damage fragile cutting edges, creating a perfect 90 degree angle. It's as easy as having an extra hand and greatly increases your ability to make true 90 degree angles

【Wide Application】This 14cm carpentry right angle jig set is professionally used to assemble boxes, drawers, cabinets, frames, furniture cabinets, etc. At the same time, this clamping square for woodworking has precise graduations and can be used as a ruler. Perfect for squaring up shelf cabinets and keep a square while assembling frames, cabinets, or just about any box

Mini Size：Compact design perfect for use with the T-slots on desktop CNC machines like the 3018 series.

Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in)

Working range: The clamp accommodates material up to 1.77'' thick and features easy to tighten knobs for quick installation or removal of stock material.

【Corrosion-Resistant】TUV approved, high precision single ear stepless hose clamps are made of 304 stainless steel. These clamps are anti-rust and corrosion resistant, a good choice for long-term use. Hose clamps are used to seal various types of hoses. Included pincer is used to increase clamp force. The jaws of the crimper are made of chrome vanadium steel, which is durable and will not collapse or deform. It is the perfect design for repairing pipes & plumbing systems.

【Cochlear Design】Cochlear design ensures continuous clamping during temperature changes, machine variations, or dimensional changes. The pipe is always in good sealing and fastening status.

【Polished Smooth Edge】The edge of all clamps are polished smooth, and they will not damage the hose. 360 ° Stepless Design, no inner protrusion/gap and Narrow band design provide a more centralized seal pressure.

[APPLICATION]: For mills with 7/16" table slot

[SIZE]: Studs are 3/8" - 16 TPI

[PACKING]: 24 studs (4 pieces of each 3", 4", 5", 6", 7", 8" long), 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 end hold-downs, Wall case

【High Quality】Our spring clamps are made of durable plastic. Rugged nylon construction helps keep the project placed and lasting performance for longer life.

【Human Engineering Handle】Our spring clips use a round handle for a comfortable grip. Anti-slip handles to reduce hand fatigue and make you operate efficiently.

【Excellent Design】Flexible orange grippers can rotate different degrees to adjust different objects, and the orange grippers can also be removed, to be used in other items.

HIGH QUALITY: 12 pieces 3.5 inches long spring nylon clamp. Our spring clamps are made of durable plastic. Rugged nylon construction helps keep the project placed and lasting performance for longer life.

FLEXIBLE SPLINT: The orange splint is made of plastic material, not easy to scratch the surface of the object. Splints can rotate to different degrees to adjust different objects. the orange splint can also be removed, allowing chips to be used to hold other items. More flexible and convenient to use.

HIGH STRENGTH SPRING: The plastic clips adopt high strength spring design, the spring applies a certain pressure, strong clamp, and efficient use. It is a good partner for your DIY projects like photography, background, carpentry, etc.

[SIZE]: Table Slot: 9/16IN, Stud Size: 1/2IN-13

[PACKING]: 24 studs; 4 pieces 3, 4, 5, 6, 7, 8" Long, 4 coupling nuts, 6 flange nuts, 6 T-slot nuts (part #202-4817 please refer the table below for the dimension), 6 serrated end clamps, 6 step blocks, Wall Holder

[MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts heat treated.

[SIZE]: Table T-Slot size: 5/8IN, Stud size: 1/2IN-13

[PACKING]: T Nut No. TN-0212 Step Clamp 25S-12, 40S-12, 60S-12, (2pcs Each size) Setp Block: STB-1, STB-2, STB-3 (2pcs Each size)

[MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts heat treated.

Holding Capacity:220Lbs, solid grip; with adjustable rubber pressure tips.

Latch Clamp 201B with plastic cover handle, easy, safe and comfortable operation. Material: Metal, Plastic, Rubber Cushion.

Package Included :10pcs smallest hold-down toggle clamp with function - Oil and Stain resistant red vinyl hand grip.

🏠【2023 UPGRADE SIZE】Plus Size Square(7.1INCH and 180MM) + Plus Size Clamps Design(5.15 INCH); Compared to short steel L rods in the market. The L bolt of our large Clamping Square plus & csp clamps is long enough to get a better grab on the material, fine for small items and also for larger ones

🏠【PROFESSIONAL WOODWORKING TOOL】Aluminum corner clamps for woodworking can work with clamping tool, to check and position the corner for wood board jointing to gluing up or welding at a right angle. 90 degree corner clamp tool is pretty practical to make your woodworking project easier.

🏠【FURNITURE WIDELY APPLICATION】Precision positioning squares carpenter tool is suitable for DIY assembling boxes, drawers, cabinets, frames and other furnitures. Long L bolt can maintain a perfect square while assembling any box or frame. Right angle clamp jig also can be used for processing outside angel corners, metal right angels, welding and other professional operations.

Holds up to 49 lbs.

Holds objects 2.5” to 7.5” in diameter.

Mounts with three #10 bolts or screws (not include).