Best Aa-Racks in 2026

The Model X33 Truck Rack is manufactured with premium quality powder coating and a glossy finish that will lead to long term durability. Designed in California, Made in Malaysia.

The top section is built with reinforced Two "T" sleeve bars plus Middle Cross Bar. The Double-barred Middle section won't easily dent or bend, making it even stronger than a one-barred design.

The extendable design also makes it compatible with different Truck-bed Width ranged from Min.49" - Max.69".

Custom Adjust Bar Height provides maximum carrying versatility for easy loading, carrying and storage

Durable, reinforced heavy duty aluminum construction and distributed utility loads up to 450 lbs

Powder-coated with weather resistant paint. Built to work & last

The X31 features a tested loading capacity of 800 lbs.It is powder coated in the color of black

The rope hook on the side of all four uprights provides the security for tying the tools or loads

There are FIVE drilling holes on the upright plate, which make X31 more compatible bolting on different sizes of bed margins.You could choose our C-Clamp (ASIN:B0789DDLBJ) for which No Drilling Required

Can be used on most Truck Racks / Van Racks / SUV Racks

Cast Aluminum door and end cap, Stainless Steel saddle brackets U-bolts and hardware

Spring loaded door latch and urethane gasket for weather resistance

The X31 features a tested loading capacity of 800 lbs.It is powder coated in the color of black

The rope hook on the side of all four uprights provides the security for tying the tools or loads

Non-Drilling X31 Truck Rack with Black C-Clamps (Set of 8) included, NOT COMPATIBLE with trucks with Utility Track Systems

Low-profile utility rack built for the purpose of carrying short ladders, kayaks or cargo Basket & cargo Box

Durable, reinforced heavy duty aluminum construction and distributed utility loads up to 800 lbs

Powder-coated with weather resistant paint. Built to work & last

This is the combination of the basic model X35 and The Cab. Protective Screen

The Cab. Protective Screen is removable

Commercial grade steel for heavy duty use

Universal design to fit a variety of full-size pickup trucks, NOT COMPATIBLE with trucks with Utility Track Systems

Durable, reinforced heavy duty aluminum construction 71" wide x 28" high

Great for hauling ladders, lumber, pipe, and distributed utility loads up to 800 lbs

Set of 4 quality P-AC-03 truck cap & lid clamps for short bed.

Made with structural aluminum to ensure quality and strength

For the specific size, please refer to list picture No. 2 for reference

Designed to fasten to fiberglass pickup truck caps.Universal Mounting installation ( Drilling Required ) Cross Bar Length: 60''

Each Crossbar is made of extruded aluminum, designed for Heavy-Duty purpose (Load capacity dependent on load capacity of cap/shell)

Mounting base is made of Gauge 7 (3.5mm actual) aluminum

Set of 4 clamps designed to mount truck rack/truck caps on many pick-up truck models.Also available set of 6 (ASIN: B0793L4X2D)

Made with structural aluminum to ensure quality and strength

Size easily and fit firmly to your truck and cap

The Model X33 Truck Rack is manufactured with premium quality powder coating and a glossy finish that will lead to long term durability. Designed in California, Made in Malaysia.

The top section is built with reinforced Two "T" sleeve bars plus Middle Cross Bar. The Double-barred Middle section won't easily dent or bend, making it even stronger than a one-barred design.

The extendable design also makes it compatible with different Truck-bed Width ranged from Min.49" - Max.69".

【Jetty Saddle System】Flexible two point saddle system with upgraded stainless steel base which adapts to kayak hull design. Hold your kayak in place, occupy minimal space on load bar. Can load from either side of vehicle

【Rubber Padding】Integrated rubber padding protects kayak during transport. They are Anti-Slip, water and sun resistant

【How to Use】Attach Carrier to Vault Cargo roof rack rails for an easy kayak transportation solution

【Jetty Saddle System】Flexible four point saddle system, which adapts to kayak hull design. Hold your kayak in place, occupy minimal space on load bar. Can load from either side of vehicle

【Rubber Padding】Integrated rubber padding protects kayak during transport. They are Anti-Slip, water and sun resistant

【How to Use】Attach Carrier to Vault Cargo roof rack rails for an easy kayak transportation solution

Unique Three-bolt Lock design makes it compatible to most van rain gutters; while keeping the stability for the loads, it is easy to install & uninstall.

The Model X316-T is high-profile van roof rack. It is designed for older generation model van with medium height rooftop. It has a gutter-to-rooftop clearance of 6.5 inches. ( Please see Listing Picture No. 4 for reference )

Cross bars are built with the thickness of Gauge Grade No. 13 (2.25mm actual steel thickness) for heavy-duty purpose.

Will fit onto toppers (drilling required for installation)

17 Gauge (1.35mm actual) Steel construction provides 350lb Max. loading capacity

1.2" diameter cross bars;Length adjustable from 35" to 57"

Our unique Three-bolt Lock design makes it compatible to most van rain gutters; while keeping the stability for the loads, it is easy to install & uninstall.

The X27-T features the Adjustable Middle Bar design which fits the new model van with uneven roof. It has an adjustable range of 28.5 mm. It fits both the older models and newer model vans, making it universal to most cargo vans.

The Protective Rubber Covers on both upright clamps prevent metallic friction on the rain gutters, which can also further reduce chance of rusting. The X27-T also comes with six Adjustable Ladder Stoppers; (two for each bar), they provide the convenience and security for multiple ladder carrying.

Our unique Three-bolt Lock design makes it compatible to most van rain gutters; while keeping the stability for the loads, it is easy to install & uninstall.

The Protective Rubber Covers on both upright clamps prevent metallic friction on the rain gutters, which can also further reduce chance of rusting.

The adjustable middle square bar of model X27 is built with the thickness of 1.5mm steel tube and 2mm actual thickness of steel plates are used on both side mounting base.

Set of 4 high quality and strength truck cap clamps, Constructed of tempered aluminum with a Mill Finish

Seize easily and fit firmly for many truck caps and camper shell

For the specific size, please refer to list picture No. 2 for reference

【DOUBLE FOLDING】This kayak roof racks is adjustable to fit different shapes of kayaks and other outdoor gears, minimize vibration and noise,while maximize safety during transportion. Fold away to allow your car to fit in parking garages.

【Rubber Pedal & Foam Protector】The extra thick foam padding on the kayak carrier provide better grasp of the kayaks.The enlarge rubber base gives a better support to protect your car roof from scratching.They are Anti-Slip, water and sun resistant.

【How to Use】Install the kayak Carrier to Vault Cargo roof rack rails for an easy kayak transportation solution.Strap the kayak to the roof racks with tie down strap. Tie the bow and stern to the front and rear of car for extra safety. Pull and push the kayaks to make sure firm and sturdy.

Our unique design of Bracket Bar are built to strengthen the existing basic truck rack style. Each two of the Bracket Bar are jointed with 6 / 4 Grade 8 Carriage Bolts; adding a total of TEN Carriage Bolts built on each upright poles.

The package also comes with Two of the One-Piece Handrail, which provides the “Grab and Hop” convenience of getting on the truck bed. The middle of two side bars increase two welded steel plates to enhance brace to even load distribution.

It features the extendable top cross-bar which can be adjusted for different sizes bed width. The adjustable range covers inner bed width from Min. 51'' Max.71''. The height is 30.5'' to the clearance and 28'' to the cross bar.Fits 5.0'~8.0' bed

The AX27 features the Rust-free material of Aluminum. The package comes with a completed set of Mounting clamps & hardware.

Our unique Three-bolt Lock design makes it compatible to most van roof rails,while keeping the stability for the loads, it is also easy to install & uninstall.

The Extendable Top Bar allows the AX27 to fit in different width of van roof. The top bars extension ranged from Min 56" ~ Max 63"

Constructed of Heavy Duty Rust-Free Aluminum with Stainless Steel Hardware; Durable and ready to handle tough environments

No-drill required & sold individually

Seize easily and fit firmly to your truck and cap

【FOLDING & Stainless Steel】Each Stainless Steel kayak rack folds down to allow your car to fit in parking garages and not have to remove. Folding kayak racks also provide more flexibility to fit different shapes of kayaks,firmly hold the kayaks during transporation.

【STRONG CONSTRUCTION】The kayak carrier is made of power coated corrosion-resistant steel, make it strong and safe to haul kayaks for long trip with as much as 150lbs loading capacity.

【RUBBER PEDAL & FOAM PROTECTOR】The foam padding and the rubber base of the kayak rack are made of real rubber and foam. They are Anti-Slip, water and sun resistant for more hauling safety and longer service time.

【FOLDING】Each J-hook on the kayak roof rack foldable to allow your car to fit in parking garages,occupy least space.

【STURDY CONSTRUCTIOIN】Constructed of heavy duty powder coated tubular steel,extra thick foam paddking cover full range of each bar, AA-Racks kayak carriers provide the ultimate car roof top kayak transporting solution for your outdoor adventures.The rubber bracket base and reinforced hardwares add more security on the road,free the mind to enjoy watering sports or kayak fishing.

【UNIVERSAL MOUNTING】The 180° folding adjustment motion together with the reinforced bracket base and the full set of mouting hardwares make the kayak rack able to fit most types of cross bars,such as square, trapezoidal and oval shaped cross bars,excluding round shapes.Be noted the cross bar should be at least 1.8" from the height of the roof to have enough installation clearance. Crossbars shown in the pictures are not included

Custom designed bolts for added security and easier installation

Steel design with adjustable padding for carrying strength and kayak protection

Wide mouth J bar offers easier loading and unloading

【DOUBLE FOLDING】Each J-hook on the kayak roof rack could be folded flat to allow your car to fit in parking garages,occupy least space.The car roof rack hauler is adjustable to fit different shapes of kayaks and other outdoor gears, minimize vibration and noise,while maximize safety during cargo hauling.

【STURDY CONSTRUCTION】Constructed of heavy duty powder coated tubular steel,extra thick foam paddking cover full range of each j-bar, AA-Racks kayak carriers provide the ultimate car roof top kayak transporting solution for your outdoor adventures.The rubber bracket base and reinforced hardwares add more security on the road,free the mind to enjoy watering sports or kayak fishing.

【UNIVERSAL MOUNTING】The 180°folding adjustment motion together with the reinforced bracket base and the full set of mouting hardwares make the kayak rack able to fit most types of cross bars,such as square, trapezoidal and oval shaped cross bars,excluding round shapes.Be noted the cross bar should be at least 1.8" from the height of the roof to have enough installation clearance. Crossbars shown in the pictures are not included

Set of 4 quality P-AC-02 truck cap clamps for short bed.

Made with structural aluminum to ensure quality and strength

For the specific size, please refer to list picture No. 2 for reference

Will fit onto toppers (drilling required for installation)

17 Gauge (1.35mm actual) Steel construction provides 350lb Max. loading capacity

1.2" diameter cross bars;Length adjustable from 35" to 57"

The Windshield Truck Bed Rack holds up to 9 windshields

Constructed Of heavy gauge steel with weather resistant black powder coat finish

Masts covered with foam padding to minimize damage done to windshields are 22" / 550mm high