Best Accusize Industrial Tools in 2026

Class ZZ. Size electro-etched on each piece

Tolerance: 0.0000" to +0.0002"

All members 2'' long, centerless lapped

For Lathe Swing 10-15''

Quick Change Tool Post (USA STYLE). Made of steel.

Style 2: Boring Turing & Facing

81 pc Grade B Steel Gage Block Set with MFG'S certificate

Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. (20 C).

All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block

For Lathe Swing 10-15''

Quick Change Tool Post Holder (USA STYLE). Made of steel.

Style 1: Turning and Facing Holders

7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4"

Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M); SER0500J11 (insert: 11ER A60); SWGCR08-2J (insert: WCMT22); SCLCR08-2J (insert: CCMT21.5); SCLCL08-2J (insert: CCMT21.5); SDNCN08-2J (insert: DCMT21.5); SDJCR08-2J (insert: DCMT21.5)

Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc.

For Lathe Swing 6-12'', AXA

Style 2: Boring Turing & Facing

A: 15/16'' ; B: 1/2''; C: 7/16''; D: 1-1/2", Shank 1/2"

Model Code: S08Q-SCLCR3; 1/2" Shank Diameter; include 1 piece CCMT32.5 insert; O.A.L: 7inch; Inerst Screw: M4x8

Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle

Boring from light roughing to finishing in small bores; With 1 piece CCMT Carbide Inset and Key

Used for machining aluminum

Carbide

10 pc/box

Diameter: 5/8", Shank Diameter: 5/8", Flute length: 1-5/8", Overall Length: 3-1/4"

4 Flute, Standard Tooth

M42-8% Premium cobalt, TiAlN Coated

Range: 0-8'', Resolution: 0.001''.

Inside, outside, step and depth measurements

Direct reading to .001" in large clear dial/.-100

Range: 0-4", Resolution: 0.001'', 0.100" single revolution, direct reading to .001" in large clear dial/.-100, accurate to .001'' per 4"

Hardened stainless steel, satin chrome finish, crisp engraved graduations, covered rack, deluxe case

Measuring face hardened, precision ground and micro-lapped for absolute accuracy, for fine adjustments

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''.

Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included

Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations

Ansi : CCMT21.51 ( = ISO CCMT060204 ), Insert Style: CCMT, Insert Size: 21.51

IC: 1/4, Thickness: 3/32, Thru Hole: 7/64, Radius: 1/64, 7 degree

Insert Grade: BPS101

Includes 3 Micrometers with measuring ranges: 0 - 1", 1 - 2", 2 - 3", Vernier Graduations: 0.0001", accurate to 0.0001". Mitutoyo-style frame - solid casting frame.

Lock nut

Crisp, clear, easy-to-read graduation. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Super hard carbide tipped. Ratchet handle for precise application of force.

Range: 0.010" - 0.500" with holder

Satin chrome finish

Individually marked

1 inch cutting depth, 8 pc Annular Cutter set; 3/4'' Weldon Shank

Incudes 2 pcs pilot pins and 6 pcs Annular cutters

Cutter diameter of each cutter: 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'; Pilot Pin Size:1/4" x 3" (overall length)

Accuracy: ±0.0001'' per inch. Furnished in 1 increments to 5, and in 5 increments to 30

For angle set-ups in tooling, productions, and inspection. Hardened and precision ground

Lightly magnetized for better holding. Size 3'' long x 1/4'' thick

1/8" thick matched pairs. 6" length

Our most popular parallel set, this set includes 10 matched pairs with ultra-accurate dimensions

Made from high quality alloy steel

Carbide Indexable End mills, 3/4'' straight shank, 2''

Comes with inserts installed

Uses standard triangular inserts

M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits

Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。

Width x height: 1/2" x 1/2"; overall Length: 4"

Reamer diameter is 3/8"; Shank diameter is 3/8"; Shank length is 1-1/2"; Flute length is 2-3/4"; Overall length is 4-5/8"

5 flute; Straight shank with 3 equal flats to fit a 3/8" chuck

Left-hand spiral with right-hand cut

Black dial face, Range: 0-6'', Resolution: 0.001''

Direct reading to .001'' in large clear dial/.-100

Graduation 0.001 per revolution and covered rack

Versatile and economical. Clearance angle of main cutting edge = 7degree

Available in 5 shank sizes and styles.

Available with 3 different radii.

Reamer Diameter: 11/16''; Shank Diameter: 1/2''; Shank Length: 1-1/2'';Flute Length: 4-1/2''; Overall Length: 6-3/8''

5 Flute. Left-Hand Spiral with Right-Hand Cut

HSS reamer to align existing hole prior to rivet or bolt installation

6 pc Ultra-Precision M-Type Outside Micrometer Set;

Includes 6 micrometers with Measuring Ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6'', Vernier Graduations: 0.0001'', accurate to 0.0001''. Mitutoyo style frame - solid casting frame.

Resolution: 0.0001"(inch); 0.01mm(metric)

5 Flute. Left-Hand Spiral with Right-Hand Cut

HSS reamer to align existing hole prior to rivet or bolt installation.

The point is tapered to allow entry into overlapping holes.

R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System

With a Key

For Drill Use Annular Cutters on Bridgeport Milling Machine

Rad.: 1/2", Shank dia.: 3/4", Largest dia.: 1-1/2", Overall length: 3-7/8"

Intended for use in milling rounded corners

High Speed Steel

Rad.: 5/16", Shank dia.: 1/2", Largest dia.: 1-1/8", Overall length: 3-1/4"

Intended for use in milling rounded corners

High Speed Steel

Clearance angle of main cutting edge = 7degree; 3/8'' Square Shank, 5 Pcs/Set Indexable Turning Tool Set, TCMT21.51

STACR, STNCR, STECN, STDCR, STCCR, with 5 TCMT Inserts, 5 Trox Screws, 2 Torx Keys

Versatile and economical. Screw Size: M2.5 x 6