Best Acpulse in 2026

Canister is built with cold drawn steel tube provide the high durability, the low variance ID feature prevent grease leakage from happening in bulk application.

O-Ring sealed high pressure piston design, prevent the grease from leaking from pump head.

Non-slip rubber grip provides higher griping friction.

High Performance: High quality terminals provide best possible fit to ensure maximum conductivity between distributor towers and spark plug wires, prevents arc through and crossfire.

High Quality: Highest standards of quality and precise specifications, engineered specifically for GM Vortec V6 engines, offering quality reliability and durability. Fuel mileage and acceleration better than OE.

Distributor Cap And Rotor: 4.3L V6 Engines MODELS ONLY, direct replacement ready to install, including the cap rotor and screws.

High Quality - Canister is built with cold drawn steel tube provide the high durability, the low variance ID feature prevents grease leakage from occurring in bulk application. Solid construction of standard steel barrel.

Heavy Duty Grease Gun - Heavy duty cast head working pressure is up to 6000 psi, compatible with 14 OZ. standard grease cartridge and bulk grease (400cc)

Better Design - The O-ring sealed high-pressure piston design prevents the grease from leaking from the pump head. It has a metallic case head which adds an extra layer of durability to the device. Non-slip rubber grip provides higher griping friction.

LOCKS ON, DOES NOT LEAK: Grease goes in, not on the machine. LockNLube’s unique sliding sleeve ensures that when the jaws are locked onto the Zerk, a leak-proof seal is created.

ONLY REBUILDABLE COUPLER: All LockNLube couplers include a rebuild kit! Simply replace the seal and jaws and it is as good as new = lowest lifetime cost.

COMPATIBLE WITH ALL GREASE GUNS AND ZERK FITTINGS: 1/8" NPT works with all grease guns and manufacturers – pneumatic, manual, or electric. Locks on to all Metric and SAE specification Zerks.

MIL-G-21164D for upper receiver threads, barrel nut installation and buffer tube installation

High quality lube good for any number of applications, exercise equipment, hinges, reels, ball bearings, bicycle gears, even telescope mounts

Aeroshell 64 / Aeroshell 33 MS sets the standard with exceptional anti-corrosion and anti-wear performance

USED BY U.S. SPECIAL FORCES WORLDWIDE: TW25B is uniquely engineered, made in America and is used by U.S. Special Forces.

SUPER LUBRICATION and PROTECTION: Preferred lubricant on heavy weaponry, AR's, all firearms, shotguns and handguns while protecting wear parts and bore.

OPTIMIZED FOR PERFORMANCE and REDUCED MAINTENANCE: Ensures firing reliability in extreme temperature conditions ( -90°F (-67°C) to +450°F (232°C) and is the most durable extreme performance lubricant available.

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

DEWALT 20V grease gun kit can control grease flow with the variable speed trigger

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

The battery operated grease gun can control grease flow with the variable speed trigger

Industry leading 10,000 PSI max operating pressure

48" flexible hose offers greater access to difficult to reach fittings

Air bleeder valve for quick priming

ALL-WEATHER GUN LUBRICANT OIL - Gun Butter’s Pen Oiler not only makes your gun more durable, but it also lubricates your gun properly to ensure optimal performance every time you clean it! The all-weather lubricant will not burn up or evaporate in summer’s heat; it functions normally in freezing weather and salt air, stays intact during pouring rain, and repels dust and airborne sand in dry conditions which cause wear and failure. It also inhibits corrosion, preventing the formation of rust.

ENHANCED FOR EXTREME TEMPERATURES - The most advanced lubricant for heavy weaponry, as well as your pistol, handgun, rifle, shotgun or firearm of your choice, Gun Butter Oil is not grease, but a gun lube and cleaner that has enhanced lubricity for extreme temperatures and humidity; its oil will resist change and perform consistently below -20 degrees to over 400 degrees Fahrenheit. Gun Butter’s smoothness and consistency is unmatched due to its ease of function.

BREAK IN PROTECTION & CLINGABILITY - Ideal for armed forces, police, and top shooting professionals, this high-performing gun lubricant gives break-in protection and clingability (film strength) to maintain its placement. Gun Butter’s gun lubricant cleans, lubricates, and protects metal from rust, moisture, and dramatically reduces wear during all shooting conditions. Gun Butter provides the maintenance your gun needs so that you can use it for a longer period of time.

Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on.

Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure.

Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler.

Extra reach for hard to reach grease fittings

Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces

Works best with the LockNLube Grease Coupler

The 5803 easily screws directly onto any hand-held grease gun.

Overall length is 2.76 Inches.

Standard 1/8 In. NPT (f) screw-on style thread connects to both rigid extensions as well as flexible hoses with a 1/8 Inch NPT (m) connection.

Anti-Mess Grease Pump: Single-hand held grease gun with zinc-plated steel barrel provides a more clean and efficient way of greasing

Kit Includes: A one-hand pistol grip grease gun, 500mm high-pressure nylon hose, 10 AirTec G200 multipurpose grease tubes, and 4-jaw hydraulic coupler

High Pressure Capability: Grease gun pistol ensures function under pressures as high as 300 bar (4,350 PSI) and multiple braid burst pressure of 1,000 bar (14,450 PSI)

Aeroshell 33 MS grease in a hard to find size.

Mil-Spec grease in easy to use quarter ounce container for use with guns and other smaller applications.

MIL-G-21164D - Approved AR Grease / AR Grease / Gun Grease

The product is easy to use

The product is durable

The product is manufactured in China

Develop over 10,000 PSI without batteries

Patented pressure return valve easily clears pressure from the hose and returns it to the canister with no mess.

Includes the LockNLube Grease Coupler, 10 ft. hose, and the G.Scoop to easily and cleanly refill with bulk grease

1 Year warranty on material and workmanship

This product meets customer requirement

Product is manufactured in Mexico

10,000 PSI and 7.5 oz./minute flow rate for maximum efficiency

Steel grease tube for maximum durability

On-board LED work light helps to illuminate workspace

M18 48" Grease Gun Hose W/Coupler

The product is easy to use and easy to handle

The product is highly durable

LockNLube Grease Coupler Locks on, stays on. Doesn't leak.

Loop & Lock storage feature keep you clean.

20" Heavy Duty Hose and in-line hose swivel.

Built for heavy-duty service.Fit Type: Universal Fit

Suitable for Use on most Hand, Battery Powered or Air Operated Grease Guns & Bulk Grease Pumps

Ergonomic Thumb Lever Design makes Coupling and Uncoupling totally Effortless

For use with most hand-operated grease guns

For lubricating very tight places-sealed bearings

Knurled grip to help connect/disconnect from coupler

Mini grease gun with needle nozzle

Easily lubricates air tools and other flush type mini grease type fittings

Pack bottom side with grease, then re-install base cap and push up against the inside plate with a screwdriver or other tool to feed grease up to nozzle and pressurize

Passivated finish for maximum protection from corrosion

Heavier wall thickness for extra strength

Stress relieved and tempered carbon steel spring

HEAVY DUTY RED GREASE: AtomLube Ultra Heavy Duty Red Grease is a multi-purpose high-performance lubricant designed for extended chemomechanical durability. This essential chassis bearing grease has outstanding extreme-pressure lubrication and wear protection. Includes a 2-pack of 14 oz. tubes.

HIGH-PERFORMANCE LUBRICANT: This powerful, waterproof grease eliminates friction and corrosion. AtomLube Heavy Duty Red Grease develops strong adhesion to metal surfaces for strong stay-in-place power even in severe operating conditions.

LONGER LUBRICATION INTERVALS: This heavy duty red grease has a high resistance to oxidation and washout to guarantee extended service life and longer lubrication intervals. It provides lasting protection during periods of extreme pressures and high temperatures.

Improved plunger design for easy priming and loading; 400c.c. Delivers: 1oz./ 40 strokes

Includes 18” hose with coupler and extension pipe with coupler

Pistol grip handle and knurled barrel increase grip

EXTREMELY FLEXIBLE - All weather flexibility (-40 Degree to 150 Degree F)

EXTREMELY DURABLE - Abrasion resistant outer cover. Comes equipped with heavy-duty, high quality 1/8” MNPT fittings. Coupler sold separately. Includes spring guard

GREASE GUN COMPATIBILITY – For use with manual, battery or air operated grease guns

[APPLICATION]: Grease fittings, sometimes known as Zerks or grease nipples, are small hydraulic check valves used on bearings and similar mechanical assemblies to supply lubricant to internal working parts.

[HYDRAULIC GREASING]: These grease zerks feed lubricant into a bearing instead of having to disassemble parts to apply the lubricant, which makes for effective work efficiency when using a grease gun.

[COMPATIBILITY]: This assortment kit is perfect for use on cars or vehicles and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings to allow a pressure-resistant connection.