Best Adamas-Beta in 2026

SPECIFICATION - 20 Mesh test sieve,stainless steel sieve,aperture lab sieve,10cm/4" diameter.

PREMIUM MATERIAL - 304 Stainless steel & Fine Mesh,Die-formed frames assure a proper fit,superior quality,and performance.

FINE WORKMANSHIP - Durable 304 stainless steel construction,lightweight but strong,which has the rigidity and smooth feel of glass.

SIZE - Diameter 3mm/0.12inch

PREMIUM MATERIAL - Made of high quality glass, which is durable, scratch-resistant, strain point: 440 ℃, softening point: 505 ℃

USE - These glass beads are useful as packing for distillation columns and they can also be used as boiling stones or mixing beads

SPECIFICATION - Graham condenser is designed with 24/40 standard taper joints at top and bottom, 300mm/11.81 inch in jacket length, with 10mm/0.4 inch glass hose connections

PREMIUM MATERIAL - Made of borosilicate glass, smooth surface and corrosion resistance, complete product packaging

HEAVY DUTY DESIGN - Graham condenser reusable, ground glass joints allow precision connection to jointed glassware

SPECIFICATION - 18 Mesh test sieve,stainless steel sieve,aperture lab sieve,20cm/8" diameter.

PREMIUM MATERIAL - 304 Stainless steel & Fine Mesh,Die-formed frames assure a proper fit,superior quality,and performance.

FINE WORKMANSHIP - Durable 304 stainless steel construction,lightweight but strong,which has the rigidity and smooth feel of glass.

CAPACITY - 100ml, 1Pcs, rotary evaporator bump trap

SPECIFICATION - Upper Joint: 24/40, Lower Joint: 14/20, ground glass joints

PREMIUM MATERIAL - Made of borosilicate glass, smooth surface and corrosion resistance, heavy duty design, reusable

Design: Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom. The pressures in the reservoir and the reaction flask are equal, and liquid will flow into the reaction flask even when the stopper is in place in the funnel. Pressure-equalizing dropping funnels are normally only used for inert atmosphere reactions.

Advantage: When adding liquid to an ordinary separatory funnel, it is necessary to open the stopper on the upper end of the funnel or align the groove on the stopper with the small hole on the bottle mouth, so that the liquid in the funnel can flow down smoothly. While the constant pressure dropping funnel has an upper connected tube, which can balance the air pressure without opening the stopper.

High Quanlity: Made of high-quality glass, durable and of high quality, can withstand typical laboratory thermal variations in Chemistry processes.

Advantages - When adding liquid to an ordinary separatory funnel, it is necessary to open the stopper on the upper end of the funnel or align the groove on the stopper with the small hole on the bottle mouth, so that the liquid in the funnel can flow down smoothly. While the constant pressure addition funnel has an upper connected tube, which can balance the air pressure without opening the stopper.

Design - The constant pressure addition funnel can keep the internal pressure unchanged, measure the gas volume more accurately .

Premium Material - Made of high-quality glass, durable and reusable, can withstand typical laboratory thermal variations in Chemistry processes.

Jar holds 10 slides

Slots in side of jar holds slides upright

Jar manufactured from soda-lime glass that resists staining from Eosin or Hematoxylin

Advantages - When adding liquid to an ordinary separatory funnel, it is necessary to open the stopper on the upper end of the funnel or align the groove on the stopper with the small hole on the bottle mouth, so that the liquid in the funnel can flow down smoothly. While the constant pressure addition funnel has an upper connected tube, which can balance the air pressure without opening the stopper.

Design - The constant pressure addition funnel can keep the internal pressure unchanged, measure the gas volume more accurately .

Premium Material - Made of high-quality glass, durable and reusable, can withstand typical laboratory thermal variations in Chemistry processes.

Diameter:13mm,25mm,pore size:0.22um,0.22um,10/pack

PES membrane with PP housing. Polyethersulfone microporous membrane belongs to hydrophilic membrane, with high flow rate and lowest protein adsorption.

Widely used in science laboratories for filteration of small volume samples, such as protein, culture medium, additives, buffers and reagents.

SPECIFICATION - Glass liebig condenser with 24/40 joint 300mm/11.81 inch in jacket length

PREMIUM MATERIAL - Made of borosilicate glass, smooth surface and corrosion resistance

HEAVY DUTY DESIGN - Liebig condenser reusable,ground glass joints allow precision connection to jointed glassware

Package Includes - You will get 12pcs watch glasses, each measuring 3.9" (100mm) in diameter.

High Transparency - Made of thickened glass, with the characteristics of smooth surface, high transparency and rounded curvature for safe hold.

Wide Applications - Watch glasses can be used as a surface to evaporate a liquid and hold solids while being weighed, and also suitable for covering beakers or flasks to prevent dust or other particles from entering.

Capacity:50ml Color Comparison Tube, 6pcs

Function: The colorimetric tube is the main instrument for visual colorimetric analysis experiments in chemical experiments.

With scale: The colorimetric tube has a scale, which can roughly estimate the volume of liquid or powder (not recommended as a professional measuring tool)

▶[Professional Chemistry Laboratory] high-quality materials, fine workmanship, make chemical experiments more perfect

▶[Scope of application] Multi-functional laboratory equipment for physical and chemical experiments, is the best choice for the laboratory

▶[Safety] Glass has a very small coefficient of thermal expansion, can withstand severe temperature changes, and has good stability.

Design - Buchner funnels are used for filtration using vacuum or negative pressure suction, useful where filter paper would be attacked by material being filtered. Constructed with heavy wall stems and the top of the funnel is beaded for additional strength.

Material - Made of high-quality glass, thick-wall designed, strong and durable.

Specification - 2ml;5ml;30ml;60ml;150ml;350ml;600ml, available in a wide range of sizes for general and analytical lab needs.

300 mm in jacket length

Vaccum trap

Borosilicate glass for clarity, strength, and heat- and chemical-resistance

Product: TLC Silica Gel Plate, 10×10cm

Base Mterial: Glass; Binder: Sodium Polyacrylate

Coating Thickness: 0.2-0.25mm

Glass Vacuum Cold Trap with 45/50 Joint, 500ml

Length × Width: 310mm × 130mm (12.2" × 5.2")

Made of high-quality glass, which has low expansion coefficient, high transparency and high chemical shock resistance

High quality borosilicate glass materials, chemically stable, no chemical reaction with reagents

The bottom of the P-cylinder cylinder is flat, and it is formed by flat glass double right angle, which has good flatness and sealing

Beautiful shape, correct specifications, flat bottom, tight cover, easy to clean

Made of high quality plastic for outstanding strength, durability and safety

Made very firmly, the test tube or colorimetric tube is placed on top and is not easy to fall

Light weight, easy to move, it is easy to operate and can be reused

MATERIAL - High borosilicate glass, resistant to high temperature, acid and alkali, sturdy and durable, transparent and clean.

SMOOTH SURFACE - The product surface that it is smooth and without bumps, and it is beautiful and generous.

FINE WORKMANSHIP - Fine workmanship, fine and low error, more suitable for fine experimental work.

Capacity : Up to 5 Slides

Description : Coplin Staining Jar, Glass

Lid reduces stain evaporation

Feature - Lab Drying tube with 24/40 Standard Taper Inner Joint, the bulb is used to contain desiccant, curved drying tube prevents desiccant from entering the reaction flask

Material - Made of high-quality glass, which has low expansion coefficient, high transparency and high chemical shock resistance

Application - Drying tubes are a kind of tool used to dry gas or remove impurities in gas in chemical experiments

Chromatography TLC Developing Tanks P Type Double Groove Length × Height 100×100mm/39.37×39.37in

High quality borosilicate glass materials, chemically stable, no chemical reaction with reagents

The bottom of the P-cylinder cylinder is flat, and it is formed by flat glass double right angle, which has good flatness and sealing

SPECIFICATION - 35 Mesh test sieve,stainless steel sieve,aperture lab sieve,20cm/8" diameter.

PREMIUM MATERIAL - 304 Stainless steel & Fine Mesh,Die-formed frames assure a proper fit,superior quality,and performance.

FINE WORKMANSHIP - Durable 304 stainless steel construction,lightweight but strong,which has the rigidity and smooth feel of glass.

SPECIFICATION - 24 Mesh test sieve,stainless steel sieve,aperture lab sieve,10cm/4" diameter.

PREMIUM MATERIAL - 304 Stainless steel & Fine Mesh,Die-formed frames assure a proper fit,superior quality,and performance.

FINE WORKMANSHIP - Durable 304 stainless steel construction,lightweight but strong,which has the rigidity and smooth feel of glass.

Made of good quality borosilicate glass, durable.

TLC developing tank for plates up to 100mm by 100mm.Fits 2 plates with 2 separate solvent bays.

Beautiful shape, tight cover, good effect, high sensitivity, easy to clean.

High quality borosilicate glass materials, chemically stable, no chemical reaction with reagents

The bottom of the P-cylinder cylinder is flat, and it is formed by flat glass double right angle, which has good flatness and sealing

Beautiful shape, correct specifications, flat bottom, tight cover, easy to clean

Made of good quality borosilicate glass, durable.

TLC developing tank for plates up to 200mm by 200mm.

Beautiful shape, tight cover, good effect, high sensitivity, easy to clean.

Made of high quality plexiglass for outstanding strength, durability and safety

Made very firmly, the test tube or colorimetric tube is placed on top and is not easy to fall

Light weight, easy to move, transparent appearance, it is easy to operate and can be reused