Best Advgears in 2026

Great Material: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation. Very useful automotive exterior accessories!

Multi-Function: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on. Our car accessories prevents nasty scratches and provides protection. Also the bumper guards for cars can be used to cover any existing scratches, paint damage.

Unique Design: ANTI-SLIP DESIGN of this car bumper protector, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put. Great suv accessories!

【UNIVERSAL FIT KIT】- The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.

【TOP QUALITY】- These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.

【PREFECT FOR WHAT YOU NEED】 - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.

UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.

SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.

HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.

UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 6 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.

SAVE TIME AND MONEY - You can find 200PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners.

HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.

CAR PLASTIC RESTORER: One 12 oz bottle of Meguiar’s Ultimate Black Plastic Restorer brings new life to all non-painted exterior plastic, vinyl and rubber trim.Fit Type: Universal

VERSATILE CAR CARE: Hand-applied cream that works on non-painted bumpers, moldings, door handles, rearview mirror housings and windshield cowlings

JUST A DROP: Thicker formula only requires a dime-sized drop on a foam applicator pad, giving you full control over the application and reducing the risk of overspray on surrounding paint

4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).

6 different Push pin rivet for many brand vehicles.

Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.

Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type: Universal

The extruded U-nuts can be used to replace/fix to the bumper

The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement

US design patented TYGER Guard ! The kit includes one bumper guard and all mounting hardware and DIY installation manual. | FITMENT - Compatible with 1999-2006 Chevy Silverado 1500 (Do NOT fit 1500 HD models); Compatible with 1999-2006 GMC Sierra 1500 (Do NOT fit 1500 HD models); Fit also for 2007 1500LD Classic models

Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a strudy structure.

Pre-welded light mount channel for optional LED lights(Lights excluded in the kit). Two pre-drilled mounting holes for license plate relocation if needed.

STRONG: Each stake pocket D-ring has a working load limit of 5400 lbs. Capacity is 16,200 lbs. Do not exceed Working Load Limit.

PRECISE PLACEMENT: Each stake pocket D-Ring comes with a ½” hitch pin w/ locking cotter pin and 4 pin holes, so you can adjust the height of your Stake pocket D-ring to fit your current load.

FITS MOST STAKE POCKETS: Designed to be compatible with standard 2” x 4” stake pockets. This includes common flush and outside stake pockets. Please be sure to measure before you purchase.

✅ Results That Last! – Are you tired of wasting time and money on plastic restorers that claim to last long? They always look great in the beginning.. only to fade after a few days, or maybe a month if it’s decent! Our product will renew, seal and protect any interior/exterior surface and WILL LAST.. for several MONTHS! Stop purchasing cheap junk with false claims, our product will out last all of them!

✅ Survives Rain! – Does this sound familiar? You spent all that time perfectly applying a new product and it looks great! Wow, you finally found the one! BUT… after the first rain-fall you look in disgust at yet another crappy product that left ugly streaks down the side of your beautiful vehicle... STOP THE MADNESS! Our product repels water and stays looking good for several months! Never again will you feel that disappointment!

✅ No More Oily Mess! – Do you hate all the oily, greasy gel dressing products that stay wet and never fully dry? That describes about 90% of the plastic and trim restorers on the market today! Well lucky you! We made a product that will restore and leave a great finish, but more importantly, it will completely dry to the touch! No more ruining your detailing towels and supplies with cheap oil based products!

American family owned business -- Delivering safety, security, & rock solid dependability

3/4" diameter shackle - With an Industry Standard 7/8" Screw Pin!

41,850Lbs break strength - This Bowl Shackle is Certified 41,850 Lbs of Break Strength Towing & Recovery Capacity

1 Premium Round Ramp Door Bumper (screw not included)

Approximately 2.5" round, 1" thick; Trailer Ramp Door Round Bumper

Round rubber bumper offers extra protection from ground dings and scratches; Universal fit for many applications, 3/8" screw hole (screw not included)

Virtually Unbreakable for Off-Road Towing and Recovery: 68,000 lbs (34 Tons) Minimum Breaking Strength (MBS) and 17,000 lbs Working Load Limit (WLL) means these Carbon Steel Shackles will handle virtually any towing or recovery job safely and securely

Ultimate Corrosion Protection: With our special 3 stage anti-rust coating on the shackles AND pins, plus included washers, these shackles will outlast any other, and the bold colors will look amazing on your 4x4, truck or SUV

Much Safer Than Tow Hooks: Quick and secure connection to anchor your recovery rope, tree-saver snap or snatch block means it won’t slip during towing and become a dangerous projectile

Improved replacement - this window regulator and motor assembly features enhancements over the original design for greater reliability

Failure-resistant design - features cable tension springs to resist cable reel binding from insufficient tension

Simple replacement - no special tools are required to install this regulator assembly

4 Premium Round Ramp Door Bumpers (screws not included)

Approximately 2.5" outer diameter, 1" thick; Trailer Ramp Door Round Bumper Set

Round rubber bumper offers extra protection from ground dings and scratches; Universal fit for many applications, 3/8" screw hole (screws not included)

[PREMIUM QUALITY] 3/4" D ring shackles are made of heavy duty drop forged steel with a rated towing capacity of 4 3/4 ton (9,500 lbs). Industry leading 7/8" screw pin can be accepted majority off road vehicles.

[PRACTICAL AND FUNCTIONAL] Two sets of washers included to reduce rattle noise during driving and to help protect paint on your vehicle. Removable isolator can be reused to reduce shock during pulling.

[MADE TO LAST] Shackles are zinc plated and powder coated to allow them withstand extreme weather condition.

★ NOTE: 3/4" DIAMETER SHACKLE - With an Industry Standard 7/8" Screw Pin!

★ 28.5 TON BREAK STRENGTH - This Bowl Shackle is Certified 9,500 Lbs of Towing & Recovery Capacity in the Palm of Your Hand!

★ DOUBLE PROTECTION - LIBERRWAY D Ring Shackle is Galvanized and Powder Coated, Resulting In Incredible Strength and Quality!

Direct replacement - this tailgate stop bumper is designed to match the fit, appearance and function of the original bumper on specified vehicles

Restores functionality - reliable replacement for an original bumper that is missing or has failed due to internal clip breakage

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Super Quality: 3/4" D Ring Shackle Was Made of Heavy Duty Drop Forged Steel and The Towing Capacity Up To 4.75 Tons (10,471 Pounds) For Superior Strength and An Industry-Standard 7/8 Inches Screw Pin To Keep It Stability

Fitted Suite: The Durable Rubber Shackle Isolators Work As Added Bumper Protection and Reduce The Rattling Noise When Mounted On The Vehicle. The Rubber Washers Prevent Rattles Result From The Friction Between Shackle And Anchor Point

Double Protection: D Shackle for Prevent Rust and Corrosion By Galvanized & Powder Coated and Withstands Harsh Weather Conditions

【SOLID & HEAVY DUTY】- AUTOBOTS 3/4 Inch D Rings Shackle with 7/8 Screw Pin and Isolator Washer Kits to Make It More Stability. Our Shackles is Made of High-quality Forged Steel. Its Towing and Recovering Capacity is Up to 4.75 Tons ,Its Break Strength Reaches Up to 48,000lb

【MATCHING KITS】- Our 3/4 Shackle is Equipped with 2 Isolators and 4 Washer Kits, Which Act As an Additional Bumper to Reduce Friction Between Shackle and Anchor Point and Clicks when Installing on the Vehicle

【DOUBLE PROTECTION】-it is Electro-galvanized and Powder Anti-rust Coated, Which Makes the Clevis Shackle More Strong and Durable and Can Effectively Prevent D Rings Rust and Prolong Product Service Life

SUPER WIDE Bumper Protection Area measuring 46" x 12" - The Largest Bumper Protector!

High Intensity Safety Reflectors make the BumperBully stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations

STEEL REINFORCED SECURITY STRAPS – Help Deter Theft – Ultra Heavy Duty

At 14" EXTRA WIDE x 8.5" HEIGHT X 2.25" THICK - BumpShox XL is Designed To Be Taller and Wider Than a Standard License Plate Frame

TOUGHER THAN STEEL – V-Tech All Weather Foam ** Will NOT Crack or Rust Like Metal or Plastic License Plate Frames **

RECESSED SCREW DESIGN - No Protruding Metal Parts That Can Damage Another Vehicle's Bumper

Improved replacement - this window regulator and motor assembly features enhancements over the factory part for greater reliability

Failure-resistant design - features cable tension springs to resist cable reel binding from medium-term elongation

Enhanced components - also includes cable guides to eliminate high cable tension and reduce cable stress

High-strength: our tow hitch receiver consisting of carbon steel with a breakpoint of 45,000 lbs. Shackle silicone isolators to prevent scratching when mounted. This shackle hitch receiver accessory is suitable for all towing applications

Anti-rust: hitch receiver anticorrosive with electro-galvanized steel for added durability. The black powder coating provides trailer hitch receiver durable and strong protection against the hardest of conditions

Multi-mount design: Shackle hitch receiver with 5/8" screw pin, 3/4 shackles isolator and washer to make it more stability. Dual hitch pin hole design allows the D Rings to swing horizontally or vertically for ease of use

【 UNIVERSAL D RING SHACKLES 】 - 3/4" d-ring shackles 4.75 Ton (9,500 Lbs),with an Industry Standard 7/8" Screw Pin. Designed to work specifically with tow strap hooks,ideal for most car accessories.

【 4.75 TON CAPACITY 】 - Nilight D Ring Shackles are rated at 9,500 Lbs of Towing & Recovery Capacity for pulling or towing.Excellent addition to your recovery kit. Perfect for anyone towing or hauling vehicles or trailers.

【 OFF-ROAD VERSATILITY 】 - Universal design and great for Jeeps, ATV, UTV, Trucks, Trailers, and sport-utility vehicles and for use with receiver hitch, winch snatch straps, snatch blocks, tree savers - best off road recovery accessory.

Oe Spec Or Performance/Custom: OE Spec, Year: 2014 2015 2016 2017 2018, Certifications: OE, Make: Compatible with Dodge

Manufacturer Part Number: 82213744, Manufacturer Warranty: 2 Year, Custom Bundle: Yes

Returns Accepted: Returns Accepted, Oe/Oem Part Number: 82213744, Modified Item: No

US design patented TYGER Guard ! The kit includes one bumper guard and all mounting hardware and DIY installation manual.

Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a strudy structure.

Pre-welded light mount channel for optional LED lights(Lights excluded in the kit). Two pre-drilled mounting holes for license plate relocation if needed.

Direct replacement - fits and performs like the original equipment on specific vehicles

Reliable fit - precision-engineered to match the design and dimensions of original components

Durable construction - manufactured to strict standards using sturdy, safe materials

Fits 1987-06 Wrangler TJ/YJ

Provides maximum clearance for approach and departure angles

Deflective angles are designed to protect hood in a roll-over