Best Afatebox in 2026

Size: JIC -8 AN Male (3/4-16) Thread Flare to 3/8" SAE tube connector

Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum Material

Black Anodized Finish for Durability and Strength

JIC 8 AN 3/4-16 male thread flare to 3/8 inch SAE quick connect female push on fuel line adaptors tube hose connector

Manufacture from high performance lightweight 6061-T6 cnc machined billet aluminum material.

Black Anodized Finish for Durability and Strength

Female -6 AN (9/16"x18) swivel to 3/8 inch barb fuel line quick disconnect tube adaptor, straight

Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aircraft Aluminium Material

Black Anodized Finish for Durability and Strength

AN8 JIC -8 AN female to AN8 male flare 3/4-16 thread fuel check valves for select fuel cells

Black anodized finish, made of lightweight 6061 t6 cnc machined billet aluminium alloy

Roll-over valve #8, for select fuel cells, When fitted its stays open which allows the cell/tank to breathe

JIC -6 AN 9/16-18 Thread male flare tip-over breather valve fuel pipe tittings adaptor an6 vent

Made of Lightweight 6061 T6 Aluminum Material, Black and Blue Anodized Finish

Foolproof ball check valve closes on rollover to prevent fuel from escaping, it is an excellent safety device that can be installed in any fuel cell or tank

Double Spiked Sides for Tenderizing Venison, Pork, Veal, Lamb, Chicken, Steak & Other Meats

This meat mallet weighs 0.66 pound, premier quality tool designed for ease of use and hold.

Made of premium 304 stainless steel, commercial grade SS, will never rust and is 100% safe!

M10*1.25 thread (SIZE: Please refer to the photo shown)

Material: SUS304 Stainless Steel, 2 pcs M10 copper washers

Works with Banjo Eye Inter Diameter 10.2 mm

Length: 4.9ft (150 cm), Width: 3.2 cm, (Please refer to the photos shown)

Please refer to the photos shown. Universal fitment for most of cars and trucks

Made of durable and solid rubber to prevent scratch, 100% waterproof protection

Aluminum hose separators fit for AN 6 hose ( Pack of 2 pcs )

Size: ID 13.5mm, Surface treatment: siliver polished

Made of high performance lightweight 6061-T6 CNC machined billet aluminum

JIC 6 AN female flare 9/16"-18 thread to 3/8 tube hard line pipe hose end fittings adaptor with brass insert

Lightweight 6061 t6 cnc machined billet aluminum, black anodized

Exclusive hard anodized coating; Tube Size 3/8 inch, AN06 female

Aluminum Fuel Shut Off Valve 8AN to 8AN Male Flow Control Cut Off Valves

Black anodized 37 degree sealing angle guarantees a positive seal at maximum operating pressures

Universal fit. such as: Oil/ Fuel/ Gas/ Gad/ Water/ Fluid/ Air Line with AN-8 Ends

1/8 inch NPT male internal thread hexagon pipe plugs

Black anodized finish, precision machined to ensure precise thread engagement

Manufacture from high performance lightweight 6061 t6 CNC machined billet aluminum alloy

Fuel cell bulkhead size is -6 AN

Radiused entries for unrestricted flow

Allows you to connect fuel lines to fuel cells

Size: Female AN10 to Male AN6, the thread size of 10an is 7/8-14 UNF, the thread size of 6an is 9/16-18 UNF.

Parameter: Max working pressure: 1500PSI.Temperature range: -65°F-252°F.

Material: Made of aluminum alloy 6061-T6, anodized black surface.

Size: Female AN6 to Female AN6, the thread size is 9/16-18 UNF.

Parameter: Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉.

Sealing: The AN side of the flare is sealed by a 37 degree angle.

BASIC FLOW SIZE: All 1/4" body size air fittings. 1/4" NPT. Buna-N seals.

KWIK-CHANGE: Interchangeable/compatible with most manufacturers. Easy push to connect.

MAXIMUM: 40 SCFM. 300 PSI. Temperatures up to 250 degrees F.

[Size] 8AN to 1/2 inch barb, and thread size of 8an is 3/4-16UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

I/M Type air coupler and plugs with max pressure of 300psi

1/4" Basic body size

All the outside thread with sealant, better sealing

DESIGNED/MANUFACTURED: To exacting standards. This is a Closed/Sealing-type air chuck for use on a compressed airline

DUAL HEAD CHUCK: Makes tire valves more accessible with the two heads for easier access

INFLATE: By hooking the closed head (w/valve) directly to an airline

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

✔ INCLUDES 2pcs USA Universal Type Coupler , 1pc I/M Type Female Plug, 1pc Swivel Connector, Steel,allows connection of 2 tools to a single outlet.

✔ 300PSI WORKING PRESSURE - USA Universal Type air coupler and I/M Type plug with max pressure of 300psi.HEAVY DUTY machined construction enhances durabililty.

✔ HIGH CORROSION RESISTANCE - Steel plated nickel coupler features high corrosion resistance and long life.

[Size] The thread size of 6an is 9/16-18UNF. The ID of spring lock is 3/8 inch.

[Seal] The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.

[Parameter] Working pressure: 1500psi, Temperature range: -40°F to 176°F.

M-STYLE: The industry standard coupler. Milton M-style, ColorFit M-style, + red competitor couplers/plugs are all compatible.

KWIK-CHANGE: Interchangeable/compatible with most manufacturers. Compliant with military specification MIL-C-4109.

NPT: 1/4" female national pipe thread flow size. Case hardened steel drag guard to prevent accidental uncoupling and resist rust. Durable brass. Buna-N seals.

Milton s-765 HI-Flo V-Style 'A,M,V' 1/4" MNPT Brass Body

Milton is your number 1 source for Quality Air Accessories

Since 1943 Milton has been producing Quality Air Accessories

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction.

360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system.

WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing.

Industrial Type D 1/4-Inch NPT

Suitable for M or D type couplers, interchangeable/compatible with most manufacturers.

Common Use to air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose.

Common Use to air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose.

Suitable for M or D type couplers, interchangeable/compatible with most manufacturers.

High quality brass durable, no rust

➤ Durable Solid Brass Construction: Made of brass, long-lasting and resistant to corrosion.

➤ Do The Best to Prevent Leak: All male thread with sealent for no leaking and come with teflon tape.

➤ Easy Connect System: Sleeve guard helps reduce the risk of accidental disconnects and protects the coupler sleeve.