Best Aimeliae in 2026

GP2Y0A51SK0F 2-15CM /GP2Y0A41SK0F 4-30CM/GP2Y0E03 4-50CM/GP2Y0A02YK0F 20-150CM /GP2Y0A710K0F 100-550cm

optical sensor

GP2Y series infrared distance measuring sensor distance detection 2-15/4-30/4-50/10-80/20-150CM

1PC DC 3V Micro Vacuum Air Pump Mini Air Pressure Pump

【High Quality】: Brass nickel-plated shell, not easy to rust and fade. With 115CM high-quality copper wire, strong and durable, and excellent electrical conductivity.

【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.

【Strong anti-interference】：TVS tube protection, strong anti-interference ability. Non-contact output, and long service life.

Can be used for 3-5V DC power supply modules. It has red power indicator.

IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on

The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay

Product Name：Inductive Proximity Switch; Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type

Supply Voltage : DC 6-36V;Current Output : 300mA;Detect Object : Iron

Model: LJ12A3-4-Z/BY;Theory : Inductive Sensor;Output Type: PNP NO;Diameter of Column Sensor: 12mm;Detecting Distance : 4mm

Product Name：Inductive Proximity Switch; Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type

Supply Voltage : DC 6-36V;Current Output : 300mA;Detect Object : Iron

Model: LJ12A3-4-Z/BX;Theory : Inductive Sensor;Output Type: NPN NO;Diameter of Column Sensor: 12mm;Detecting Distance : 4mm

Special attention: After the switch is installed, the sensing distance needs to be adjusted, otherwise, there will be no response when the switch is turned on.There are two friends recently. The reaction product does not work, First note: our products are 100 % tested before they leave the factory. Solution: 1. Turn Switch control sensing distance behind the product; 2 .Send us an email and we will send you a new one.

Product Name : Capacitive Proximity Switch; Model : LJC18A3-H-Z/BX;Wire Type : DC 3 Wire Type (Brown, Black, Blue);Theory : Capacitance Sensor; Output Type : NPN NO(Normal Open);Diameter of Head : 16mm; Thread Diameter:18mm; Detecting Distance : 1-10mm

Operating Temperature : -25 to +65 Celsius (Non-freezing Condition);Size : 7.5 x 3cm / 3"x 1.2"(L*Max. Dia);Cable Length : 120cm/47";External Material : Plastic, Alloy

Product Name : Inductive Proximity Switch;Model : LJ12A3-4-Z/AX;Theory : Inductive Sensor;Wire Type : 3 Wire Type (Brown, Blue, Black)

Switch Appearance Type : Cylinder Type, Metal Shell;Output Type : NPN NC;

Detecting Distance : 4mm(+/-10%);Supply Voltage : DC 6-36V Output Current : 300mA;Detect Object : Iron;Column Sensor Diameter : 10.4mm/0.4";Thread Diameter : 12mm/0.5"

Product Name : Photoelectric Switch;Sending Light : Infrared Rays;Model :E3F-DS30P1

Wire Type : DC 3 Wire, Proximity-sensing / Diffuse Type;Type : PNP NO ;Voltage : DC 6-36V

Current : 300mA;Sensory Distance : 30cm;Head Diameter : 1.6cm/0.6'' ; Thread diameter: 18mm

♞【Model】SN04-N

♞【Product Name】 Proximity Sensor Switch SN04-N

♞【Output Type】 NPN, NO

GP2Y0A51SK0F 2-15CM /GP2Y0A41SK0F 4-30CM/GP2Y0E03 4-50CM/GP2Y0A02YK0F 20-150CM /GP2Y0A710K0F 100-550cm

optical sensor

GP2Y series infrared distance measuring sensor distance detection 2-15/4-30/4-50/10-80/20-150CM

Cylindrical Plastic Mounted Reed

Hermetically Sealed design and long life

It is normally open

Product Name : Inductive Proximity Switch;Model : LJ12A3-4-Z-BX 5V ;Wire Type : 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type

Theory : Inductive Sensor;Output Type : NPN NO(Normal Open);Thread Diameter : 10.5mm/0.41";Head Diameter : 11.8mm/0.46"

Detecting Distance : 4mm;Supply Voltage : DC 5V;Current Output : 300mA;Response Frequency : 150Hz

Product Name : Proximity Switch;Model : TL-W5MC1;Theory : Inductive Sensor;Wire Type : 3 Wire Type (Brown, Blue, Black)

Switch Appearance Type : Rectangle Type;Output Type : NPN NO ;Sensor Distance : 5mm;Supply Voltage : DC 12-24V

Output Current(Max) : 200 mA;Detect Object : Iron;Column Sensor Diameter : 11mm/0.43"

LJ18A3-8-Z/BX 5V inductive proximity switch; wire type : DC 3 wire type; switch appearance type : cylinder type

Inductive proximity switch lj18a3-8-z/bx theory: Inductive sensor; output type: NPN NO(Normal Open); diameter of head : 18mm; detecting distance : 8mm ± 10%; Set distance: 0-7mm

8mm sensor inductive proximity supply voltage : DC 6-36V; current output : 300mA; detect object : Iron; thread size: 18mm

Product Name : Proximity Switch Sensor;Model : SN04-N;Type :NPN No;Theory : Inductance Sensor;Wire Type:3-Wire

Output : Switching Transducer;Sensing Distance : 4mm (+/-10%);Working Voltage : 10-30V DC;Switch Appearance Type:Rectangle Type

Response Frequency : 500Hz max;Indicator : Red LED;Size : 18 x18 x 36mm/0.7" x 0.7" x 1.4"(W*H*L)

Over-current and short circuit protection,With LED indicator, easily identifiable.

Widely used in automatic control industry for detecting, controlling, and noncontact switching. When proximity switch is close to some target object, it will send out control signal

The Proximity Sensor Switch is used for testing parts such as size and speed can also be used in frequency counters, frequency pulse generator, liquid level control and processing procedures for the automatic convergence.

KY-026 Flame Sensor Module IR Sensor Detector

Power Supply: 0-15 V DC ; Extremely sensitive to wave between 760-1100nm

AO, real-time thermister voltage signal output; DO, high / low electric level signal output

MaxSonar-EZ1 detects objects from 0" to 254".

2.5-5.5V operation range. Low 2mA supply current.

42kHz Ultrasonic sensor with 20Hz reading rate.

It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching.

When proximity switch is close to some target object, it will send out control signal.

The Proximity Sensor Switch is used for testing parts such as size and speed

Product Name : Inductive Proximity Switch;Model : LJ8A3-2-Z/BX;Wire Type :3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type

Theory : Inductive Sensor;Output Type : NPN NO(Normal Open);Thread Diameter : 8mm;Detecting Distance : 2mm

Supply Voltage : DC 6-36V;Current Output : 300mA;Response Frequency : 150Hz;Detect Object : Iron

Mounting Hole Diameter: 18mm

Detecting Distance: 10mm±10%; Set distance：0-8mm

Output Type: PNP Normally Open(NO), Non-Shield Type

Model: NJK-5002C Supply voltage : 5-30VDC; Detection distance :10mm (effective detection distance 0-10mm) ;

Output : NPN three lines Output state normally open (NO)

Thread Diameter: 12MM ; thread length: 32MM；Load current :150MA (no more than)

Package Content: 1 x Hall Effect Sensor

Model: NJK-5002C Supply voltage : 5-30VDC; Detection distance :10mm (effective detection distance 0-10mm) ;

Output: NPN three lines Output state normally open (NO)

Product Name : Inductive Proximity Switch;Model : LJ18A3-8-Z/BX;Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type

Theory : Inductive Sensor;Output Type: NPN NO(Normal Open);Thread diameter: 18mm : 18mm;Detecting Distance : 8mm

Supply Voltage : DC 6-36V;Current Output : 300mA;Detect Object : Iron

KY-024 Linear Magnetic Hall Switches Speed Counting Sensor Module

Signal output instructions; single signal output

Circuit boards output switch quantity! (can be directly by SCM)

Product Name : Inductive Proximity Switch;Model : LJ8A3-2-Z/BX 5V ;Wire Type :3 Wire Type (Brown, black, Blue);Switch Appearance Type : Cylinder Type

Theory : Inductive Sensor;Output Type : NPN NO(Normal Open);Thread Diameter : 8mm;Detecting Distance : 2mm

Supply Voltage : DC5V;Current Output : 300mA;Response Frequency : 150Hz;Detect Object : Iron

Mounting Hole Diameter: 6mm; Cable length: 200cm/78"

Detecting Distance: 1.5mm±10%; Set distance: 0-1.2mm

Output Type: PNP NO(Normally Open), Shield Type

It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.

When proximity switch is close to some target object, it will send out control signal.

As it is capacitive type proximity switch, its detecting object target is not limited to only conductor, but also liquid and even powder things, like plastic, water, glass, oil, etc.

Product Name: Inductive Proximity Switch; Model: LJ12A3-4-Z/AY; Theory: Inductive Sensor; Wire Type: 3 Wire Type (Brown, Blue, Black) Switch Appearance Type: Cylinder Type, Metal Shell; Output Type: PNP NC.

Detecting Distance: 4mm(+/-10%); Supply Voltage: DC 6-36V Output Current: 300mA; Detect Object: Iron; Column Sensor Diameter: 10.4mm/0.4"; Thread Diameter : 12mm/0.5".

Total Size: 66 x 21mm/ 2.6'' x 0.8'' (L*Max.D); Cable Length: 1.16m/35.7''; External Material: Plastic, Metal.