Best Airmega in 2026

Suitable for high pressure air cylinder, PCP tanks and diving steel cylinder,very handy to assemble and install for Air / CO2 filling.

Max woring pressure for IN:4500psi - Out:4500Psi

8mm male quick connector and spare kits included as first one picture showed

Suitable for Scuba Tank,painball tank,co2 tank Pcp and HPA

Come with 22 inch stainless steel spring protector hose and 8mm female quick connector

Max woring pressure for IN:4500psi, Out 4500psi

Snap in place removable upper and lower goggle foam insert

Optically correct high definition dual-pane thermal lens to prevent any possible fogging

Quick-change lens retention system

High Quality Paintball Marker Oil

Same oil provided by many paintball marker manufacturers. Compatible with all marker brands such as Tippmann, Eclipse, BT, and more!

Won't deteriorate o-rings like some silicone/teflon based oils.

Allows removal of empty cylinder for refill without interrupting propane supply

For RVs with dual propane tanks; Automatically switches from primary to reserve tank when primary is empty

Pairs well with our 48 Inch Thermo Plastic Hose, item 100383-48.

90gram Prefilled CO2 Tank

Single Use Tank. Not refillable.

Standard use in most paintball markers

Lightweight DOT and TC certified aluminum 20oz CO2 cylinder Made in the USA

Five year retest cycle

exceed all industry standards

1.8k (1800 psi) burst disk (2 burst disks included)

1.8k burst disks are most commonly used on CO2 tanks and as the low pressure burst disk for 3000psi and 4500psi compressed air tank regulators

3/8-24 threads that fit standard paintball tanks

Product 1: Made In China

Product 1: Product Type :Sporting Goods

Product 1: Package Dimension :19.05 Cm X 27.94 Cm X 39.37 Cm

Oxygen regulators feature a brass core for maximum safety and permanent laser etchings on knob and body that won't peel, flake or wear off

All metal anodized aluminum construction is more durable than plastic and will not rust

Gauge protector helps prevent damage

1/4" Air Regulator Replaces: D27253 Fit Many Dewalt, B&D Craftsman & Porter Cable.

In-Line or Modular Installation

Full Flow Gage Ports, This regulator is regulator pressure ONLY, If you need Tank/Regulator pressure, please search on Amazon for following ASIN: B082MTPBZS

Has integral first and second stages that ensure smoother, more consistent flow of propane gas to all RV appliances.Fit Type: Universal Fit

Inlet: 1/4" Female NPT Outlet: 3/8" Female NPT

Outlet pressure 11"WC

【1/4’’ THREADED QUICK DISCONNECT】MRbrew thread to barb keg beer regulator comes with 1/4'' swivel nut, allows CO2 regulator to be used with 1/4" and 5/16" inside diameter size hoses, threaded setting makes disconnection between regulator and gas hoses a great breeze!

【EXCELLENT SEALING & ANTI-BACKFLOW】Durable thick nylon washer achieves quad—Ring inlet seal at connection between tank and regulator, perfectly avoids one leakage source, turning off ON/OFF valve avoids back-flow of beer, worry-free operation with MRbrew keg regulator!

【YOUR SAFETY, THE FIRST!】Integrated sintered bronze mesh inlet gas filter perfectly controls co2 gas flow, manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator!

Inlet Pressure: 250PSI / Pressure Regulating Range: 3 to 60 PSI

Flow Rate: 58 SCFM

Port Size: 1/4" NPT

❦ USE IT SAFELY---The paintball Fill Station adapter is compatible with standard K valve, J valve and H valve. You can safely fill the compressed air in the diving tank with PCP air guns into paintball, HPA co2 tanks.

❦ EASY OPERATION---The DIN Valve Scuba Adapter is convenient and reliable design allow us to connect each fill adapter to the male air tool fittings simply, then your tank will be filled up quickly. Very suitable for outdoor use.

❦ PERFECT CONFIGURATION--The Yoke Fill Station is equipped with a 36-inch stainless steel braided fuel filler pipe for longer service life and 8mm standard female quick-disconnect coupling plug.

Quick Bleed Relief Valve: With standard high pressure 8mm female quick-disconnect coupling plug.

The Yoke Fill Station: Come with 36 inch length filling hose, protective by stainless steel braided.

Perfect Fit: Fits for standard K-Valve, J-Valve and H-Valve.

Quick Bleed Relief Valve: With standard high pressure 8mm female quick-disconnect coupling plug.

The Yoke Fill Station: Come with 36 inch length filling hose, protective by stainless steel braided.

Perfect Fit: Fits for standard K-Valve, J-Valve and H-Valve.

Inlet Pressure: 250PSI / Pressure Regulating Range: 3 to 30 PSI

Flow Rate: 49 SCFM

Port Size: 1/4" NPT

Thread: 1/4 NPT

Rated Flow: 19.4 SCFM(550 L/min)

Temperature Range: 5~60℃(41-140℉)

Lightweight––up to 40 percent lighter than comparable steel cylinders.

Thick, consistent walls resist damage.

Brushed external surface provides a low-maintenance finish.

Flasc Paintball Color Coded o-rings

Enough o-rings to rebuild your marker 3 times

Includes a compartmentalized carry case to store and organize your o-rings.

Air assisted loader system feeds paint into your marker at up to 15bps

No batteries required

The feeder sprocket is linked to the air system for synchronized ball feed

Package length: 5.5 cm

Package width: 11.6 cm

Package height: 16.1 cm

O-rings are color coded by size, eliminating the headache of matching up sizes

Included color/size chart helps with your first time rebuilding your marker; After that, just replace orings by color when it comes time to rebuild again

All of the o-rings you need to perform a standard rebuild of your marker three times (other quantities available)

Thread: 3/8 NPT

Rated Flow: 88.3 SCFM (2500L/min)

Temperature Range: 5~60 ℃(41-140 ℉)

Universally Fit- The charging system extends the line from your tank to the re-fill station.It have 8mm quick release male plug and female socket on the end.

Stainless Steel Material Support High Pressure- The braided stainless steel adapter support 4500 psi high pressure with 60 inch length,and the surface is polished plating, very strong and beautiful.

Save Time on Refill-It can help you to save time and frustration at your next scenario/ big game, so that you don't have to strip to refill your tank.

1/4" Air Regulator Replaces: Fit Many Dewalt, B&D Craftsman & Porter Cable.

In-Line or Modular Installation, Full Flow Gauge Ports

Port Type 1/4 In NPT (Female) and Gauge Port Type 1/8 In NPT (Female)

Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry

Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate

Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting