Best Allstrong in 2026

Fits 1979-04 Mustangs with factory 8.8" rear ends.

Will fit 2005-current Mustang if you use a panhard relocation bracket (not included).

H.D. aluminum girdle system, made from premium quality cast aluminum (super light weight).

Reduces engine friction and wear.Helps reduce oil consumption.

Protects engine during cold starts.Improves compression, promotes longer oil life.

Effective at normal & high operating temperatures.Safe for use with aluminum & catalytic converters.

Package Dimensions: 31.75 L x 33.02 H x 31.75 W (centimeters)

Fully Rebuild able Clutch Style Postreaction

Assembled and tested in the USA

Fits 10.5" GM with 30 Spline Axles & 4.10 Gear Ratio & Down (Also Fits Thick Gears)

Yukon Dura Grips feature 4320 chromoly spider gears for ultimate durability

4 Pinion Design

USA Standard Master Overhaul kits let you finish your install with confidence

This kit uses Koyo bearings and races

Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)

USA Standard Master Overhaul kits let you finish your install with confidence

This kit uses Koyo bearings and races

Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)

Additional housing strength helps keep the ring & pinion gears meshing on the flat faces of the teeth, greatly increasing ring & pinion life and overall maximum load strength

Top quality, high power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves

Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles

Manufactured from high-strength nodular iron

Spicer performance diff covers are built to meet the demands of any environment

Includes: Cover, Spicer Premium reusable performance gasket, Drain Plug and Bolts

Rear Nodular Iron Cover with 8mm Cover Bolts

Thick walled design and durable powder coat finish

Designed and Engineered for Performance Applications and extreme conditions

Thick Walled Design

Durable Powder Coat Finish

Magnetic Drain Plug to Collect Particulates

Direct replacement - this differential cover matches the fit and function of the original equipment diff cover and includes a pre-installed magnet

Durable construction - this differential cover is made of stamped steel and finished with a corrosion-resistant coating

Cost-effective solution - offers original equipment quality at a competitive price

TOUGH: Manufactured from Thick Walled Nodular Iron Design to withstand brutal impact

DURABLE Powder Coat Finish

DRAIN PLUG: Magnetic Drain Plug to Collect Particulates

Additional housing strength helps keep the ring & pinion gears meshing on the flat faces of the teeth, greatly increasing ring & pinion life and overall maximum load strength

Top quality, high power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves

Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles

For Use on JEEP JK Front, JEEP JK Rear, 1500 Dodge Ram Front, FJ40s, On Dana 25/27/30 Front Or Rear Axles,

Super Thick Cast Nodular Iron

Bright Red Powder Coat Finish

Rear Nodular Iron Cover with 5/16" SAE Cover Bolts

Thick walled design and durable powder coat finish

Designed and Engineered for Performance Applications and extreme conditions

Manufactured from high strength nodular iron

GM14T Nodular Iron Yukon Cover

Thick walled design

Product Type:Auto Part

Package Weight: 5.8 Pounds

Country Of Origin : China

Direct replacement - this differential cover matches the fit and function of the original equipment diff cover and includes a pre-installed magnet

Durable construction - this differential cover is made of stamped steel and finished with a corrosion-resistant coating

Cost-effective solution - offers original equipment quality at a competitive price

Package Dimensions: 9.652 H x 27.432 L x 28.447 W (centimetres)

Package Weight: 6.35 pounds

Fit type: Vehicle Specific

【Vehicle Fitment】Compatible with Ford F-150 2000-2008; F-250 1985-1998; F-350 1985-1997; Excursion 2000-2005

【Vehicle Fitment】Compatible with Ford F-250 Super Duty 1999-2018; F-350 Super Duty 1999-2016 (SRW); Mark LT 2006-2008

【Note】This differential cover comes with gasket and Magnet, and only fit the models with 10.25" ring gear (not 9.75" or 10.5")

Direct replacement - this differential cover matches the fit and function of the original equipment diff cover and includes a pre-installed magnet

Durable construction - this differential cover is made of stamped steel and finished with a corrosion-resistant coating

Cost-effective solution - offers original equipment quality at a competitive price

【Perfect Fitment】Compatible with Chevrolet Silverado, Suburban, Express, Tahoe, S10, Blazer, etc --- with 8.5 in. or 8.625 in. Ring Gear

【Perfect Fitment】Compatible with GMC Sierra, Yukon, Yukon XL, Jimmy, Sonoma, C/K1500 (Suburban) --- with 8.5 in. or 8.625 in. Ring Gear

【Perfect Fitment】Compatible with Cadillac Escalade, Escalade EXT, Escalade ESV; Oldsmobile Bravada --- with 8.5 in. or 8.625 in. Ring Gear

Chrome cover for 8.8" Ford differential

Engineered for Performance

High Quality Parts for Specific Differential Applications

# Premium Material # YHTAUTO Affordable and Prime Rear Differential Cover is Precisely Manufactured with High Quality Material, Designed to Keeps Debris Out of the Gears, and Keeps Lubricating Differential Fluid from Leaking Out

# Direct Fit # Replacement for Cadillac Escalade 1999-2000, Escalade ESV, Escalade EXT 2002-2008; Oldsmobile Bravada 1998-2001

# Direct Fit # Replacement for Chevy Avalanche 1500, Blazer, C1500, K1500, C1500/K1500 Suburban, Express 1500, Silverado 1500, Tahoe

Direct replacement - this differential cover matches the fit and function of the original equipment diff cover on select vehicles

Reliable repair - the smart solution for fixing an existing cover that's rusted, damaged or leaking differential fluid

Durable construction - this differential cover is made according to strict engineering standards to help ensure dependability

# Premium Material # YHTAUTO Affordable and Prime Rear Differential Cover is Precisely Manufactured with High Quality Material, Designed to Keeps Debris Out of the Gears, and Keeps Lubricating Differential Fluid from Leaking Out

# Direct Fit # Replacement for Lincoln Mark Lt 2006-2008; Replacement for Ford E-350 Super Duty 1999-2004, Excursion 2000-2005， E-350 Club Wagon 2003-2004, E-350 Econoline 1980-1989/1997-1998, E-350 Econoline Club Wagon 1980-1989/1997-2002

# Direct Fit # Replacement for Ford F-150 2000-2008, For F-150 Heritage 2004, For F-250 1985-1999, For F-250 HD 1997, For F-250 Super Duty 1999-2020,

Direct replacement - this differential cover matches the fit and function of the original equipment diff cover and includes a pre-installed magnet

Durable construction - this differential cover is made of stamped steel and finished with a corrosion-resistant coating

Cost-effective solution - offers original equipment quality at a competitive price

Designed, engineered, tested, and warranted for GM vehicles

Precise fit for ease of installation

For proper installation, locate your nearest GM dealer, independent service center, or body shop

Made from premium quality cast aluminum.

Beautiful natural silver finish on both sides

Improves rear end life & durability, dissipates heat faster.

Replacement cover gasket for Dana 44 differentials

Package Dimensions: 0.381 L x 53.34 H x 43.18 W (centimeters)

Package Weight : 0.204 kilograms