Best Amphetamine in 2026

Durability paired with functionality make this bearing press a can't miss tool. This tool eliminates the struggle of installing and removing bearings by using leverage without damaging the bearings

This press can be used with virtually all skateboard wheels and most longboard (maximum size of 70mm x 45mm), inline (maximum size of 82mm x 24mm), and even quad wheels (maximum size of 70mm x 45mm)

This press comes assembled with an 8mm axle for standard size 608 bearings, and comes with an extra 7mm axle for size 627 bearings

SPEED - Amphetamine Hybrid Ceramic bearings are capable of high speeds with a high level of durability and longevity at a fraction of the cost.

CONSTRUCTION - Hybrid Ceramic bearings feature 1 ceramic ball and 6 precision steel balls. The single ceramic ball pulverizes dirt which keeps bearings clean. The single ceramic ball keeps cost down compared to full ceramic bearings.

FEATURES - Hybrid Ceramic bearings offer the durability of a steel bearing with the speed of a ceramic bearing. Hybrid bearings offer performance on a budget.

SPEED - Amphetamine Ceramix Silver bearings are capable of high speeds with great durability.

PRODUCTION - Zirconium Oxide ceramic balls built for the highest precision for less friction, ensuring a smooth ride everytime.

LIGHTER - Amphetamine Ceramix Silver bearings are lighter and faster than traditional steel ball bearings with an oil-free raceway.

8 inner balls

Gas-washed surfaces

Friction-free rubber shields

This package includes a set of 8 Amphetamine Abec 5 Speed Bearings with Dime Bag 1.25" Phillips Hardware, Dime Bag Spacers, and 1/4" Risers.

Amphetamine bearings are pre-lubricated and feature Grade 10 steel ball bearings, Thermally applied coatings, and Friction-free rubber shields. If you have the need for speed, go with Amphetamine!

1/4" risers (also known as shock pads) increase ride height, reduce stress cracks, soften impacts, and prevent wheelbite.

REFRESH - Premium tuned hardware kit to refresh all components for your trucks

CONTAINS - 8 Amphetamine ABEC 5 Bearings, 2 1/8" H-Block Riser Pads, 4 Bearing Spacers, 8 1" Black bolts with nuts, 8 Washers, and 4 Axle Nuts

DURABILITY - AMP Products are built to last, the bearings come prelubed with synthetic speed oil

SPEED - Amp bearings are the epitome of durability and speed, and this set features the durability of a steel bearing with the speed of a ceramic.

PRODUCTION - Hardened steel balls roll in deep raceways to reduce friction and maximize your speeds.

FEATURES - Removeable, friction rubber shields make for easy maintenance and provide a smooth ride all around.

Titanium Coated Balls

Rated ABEC 7

Includes Spacers

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards,penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets(3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

Bones REDS are manufactured in China to our Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.

Single, non-contact, removable rubber shield for easy cleaning and less friction and High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

Single, non-contact, removable rubber shield for easy cleaning and less friction

High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

Single, non-contact, removable rubber shield for easy cleaning and less friction

High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

Bones Reds are manufactured to Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry.

Single, non-contact, removable rubber shield for easy cleaning and less friction. High speed Nylon ball retainer for greater strength and speed. Pre-lubricated with Speed Cream racing lubricant. Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible.

Includes a set of 8 Bones Reds Bearings, 8 Speed Washers, and 4 Bearing Spacers.

1 Bottle of Bearing Lubricant

Makes your bearings faster

Makes your bearings last longer

Material: Chrome Steel

Weight: 2.3 oz. (65g) each

Size: 1" Diameter

100% SATISFACTION GUARANTEED - We promise you will be stoked on this or your money back.

INCREDIBLE SPEED - Bones Reds are some of the best bearings in the world for a reason, they're awesome!

BEARING SIZE - Bones Bearings are bearing size 608, which measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle).

Features Higher quality steel races, better quality and grade balls, and a superior surface finish

Single, non-contact, removable rubber shield for easy cleaning and less friction.

High speed nylon ball retainer for greater strength and speed.

16 Pack of 8mm Bearings - Enough for One Pair of Skates

Lubricated with Low Viscosity Bones Speed Cream

Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible

Package includes 1 x T-tool and 1 x Y-tool

All-in-one tool: has everything you need,suitable for most skateboard assembly, you can use it to adjust axle nuts, mounting hardware and so on

Compact:lightweight and portable,easy transport and storage,you can use it everywhere when you need

BIG BALLS, the newest member of our REDS family. BIG BALLS are engineered to roll faster and last longer by using 6, 17% larger balls, like our legendary Bones Super Swiss 6 bearings.

These larger balls let you roll faster, and keep rolling right through dirt that slows smaller balls down.

Includes: Set of 8 bearings, instructions, and sticker.

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Bearings cleaner makes skateboard maintenance a painless process

Unique design uses spacers to apply solvents equally

High density polyurethane construction for durability

9/16 Inch Socket - easily tighten or loosen your trucks

COMPACT, PORTABLE DESIGN - The PowerDyne Y3 Skate Tool has a design that allows for versatile functionality, while still fitting in your pocket.

ERGONOMIC, NO-SLIP GRIP - This skate tool has an ergonomic design that provides great grip and torque for any project.

1/2" SOCKET FOR AXLE NUTS - This all-in-one skate wrench has a 1/2" socket that is perfect for adjusting standard axle nuts.

Package includes 1 T-tool, 1 Y-tool and 2 L-type phillips head wrench screwdrivers.

Made of durable hard plastic & non-rust steel. This is an all-in-one skate tool in solid construction.

T-tool measure 4.1" x 3.8" and Y- tool measure 5.3" x 5". They are lightweight and portable, easy to transport and storage, You can use it everywhere when you need.

PACK - Skate T-Type Tools x 1 & Skate Y-Type Tools x 1

TOOLS - Includes 3/8", 1/2", 9/16" sockets & A Slide-out Phillips Head Wrench Screwdriver

HIGHEST QUALITY - 45# steel,extremely strong and durable.

→ A BRAND YOU CAN TRUST: This skateboard tool comes straight from the same CCS brand that millions of skaters have trusted worldwide since 1985.

→ QUALITY SKATE TOOL: Toss your worries aside! We stand behind our skate tool and we've got your back in the event you're not happy.

→ EVERYTHING YOU NEED: Includes slide in/out screwdriver with allen and phillip heads.

Dimensions: 11x10x2cm/4.3x3.9x0.78‘’

Portable, Easy to Use

It includes 3 sizes of sockets and a slide-out head screwdriver that fits into the top of the handle when not in use

Inner Dia 5mm Outer Dia 11mm Width 4mm, ID = 5mm OD = 11mm Width = 4mm

Compatible with Axial: AXA1221 Arrma: AR610019 Losi: LOSA6947 HPI: B022

Compatible with Tamiya: 58041, 58354, 58056 Compatible with Traxxas: 4611, 5116 Team Associated: 25239, 25618