Best Anglewide in 2026

COMPAITLBE VEHICLES - Injectors fit for 1997-1998 for Dodge B1500 3.9L,1997 for Dodge B2500 3.9L,1997-1999 for Dodge Dakota 3.9L,1998-1999 for Dodge Durango 3.9L,1997-2001 for Dodge for Ram 1500 3.9L,1999 for Dodge for Ram 1500 Van 3.9L with 0280150998 FJ683 812-12130 3031151 53031151AB

COST-EFFECTIVE SOLUTION - This ANGLEWIDE fuel injectors set provides OEM quality, making up for the performance loss caused by the original equipment

QUALITY ASSURANCE-This injectors strictly inspected to ensure no leaks and a long service life

Exact match Rear Wheel Bearings - Fitment and performance are ensured by rigorous testing, measurements and inspection of materials and components. Manufactured in ISO/TS 16949 certified factories

Replacement Wheel Bearing Hub Assembly Rear Kit - Pre-Greased and Pre-Sealed, And Multi-Lip seals provide protection. Designed to meet stringent fatigue requirements to reduce premature failure. This Rear Wheel Assembly fits both right and left front axles on your For Smart Fortwo

Replaces Part - Replaces part number 512473 - a direct replacement for the factory Hub Assembly on the driver or passenger side of your For Smart Fortwo . Please check the detail from the description page.

COMPAITLBE VEHICLES - Injectors fit for 2006-2010 for Ford Crown Victoria 4.6L,2006-2010 for Lincoln Town Car 4.6L,2006-2010 for Mercury Grand Marquis 4.6L with 0280158089

COST-EFFECTIVE SOLUTION - This ANGLEWIDE fuel injectors set provides OEM quality, making up for the performance loss caused by the original equipment

QUALITY ASSURANCE-This injectors strictly inspected to ensure no leaks and a long service life

OEM PART NUMBER - JB-6051, 24100005, 9194698, 137500P010, LIF312

APPLICABLE VEHICLES - This Lifter fit for 2008-2014 for Buick Enclave, 2005-2008 2010-2014 for Buick LaCrosse, 2006-2011 for Buick Lucerne, 2004-2007 for Buick Rainier, 2011-2014 for Buick Regal, 2004-2006 for Buick Rendezvous, 2012-2014 for Buick Verano, 2013-2014 for Cadillac ATS, 2004-2014 for Cadillac CTS, 2000-2005 for Cadillac DeVille, 2006-2011 for Cadillac DTS, 2000-2002 for Cadillac Eldorado, 2000-2004 for Cadillac Seville, 2004-2014 for Cadillac SRX, 2005-2011 for Cadillac STS

ADVANTAGES - You’ll need to replace the faulty lifter quickly if you notice symptoms for example, strange noises from the hydraulic lifters, lifters look deteriorated or worn out. Our brand new lifter is a good choice for you.

APPLY TO : Auto Shocks front rear apply to 1997-2004 for Dodge for Dakota,1999-2004 for Dodge for Durango with OE 344081 344378

FUNCTION : High-quality shock absorbers ensure excellent durability and safety in harsh environments

EASY INSTALLATION : Strictly designed in accordance with OE standards, easy installation, in-situ installation

Exact match Rear Wheel Bearings - Fitment and performance are ensured by rigorous testing, measurements and inspection of materials and components. Manufactured in ISO/TS 16949 certified factories

Replacement Wheel Bearing Hub Assembly Rear Kit - Pre-Greased and Pre-Sealed, And Multi-Lip seals provide protection. Designed to meet stringent fatigue requirements to reduce premature failure. This Rear Wheel Assembly fits both right and left front axles on your For Smart Fortwo

Replaces Part - Replaces part number 512473 - a direct replacement for the factory Hub Assembly on the driver or passenger side of your For Smart Fortwo . Please check the detail from the description page.

Rapidly cleans diesel injectors, turbos, blocked DPFs and dirty EGR systems

Restores performance, improves fuel economy and results in smoother idling

One 12 oz bottle treats 40 gallons of diesel - use every 5,000 miles

Removes carbon deposits from key engine parts

Prevents future carbon buildup on port/indirect fuel injectors, intake valves, and ports

Maximizes engine performance and fuel economy

Ideal replacement - this fuel injector sleeve is a direct replacement for the original equipment part on specified engines

Durable construction - this part is made from quality materials to resist damage from fuel and extreme temperatures

Cost-effective solution - offers original equipment quality at competitive price

Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds;

Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut;

Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working;

operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection.

works with engine off and pulse timer may be used with fuel pressure gauge.

large led display/4 pulse modes. test lead: 41.5cm / 16.3 inches.

A set of 8 fuel injector adpators for the 99 and up GM trucks

Please see the pictures of either end of the adaptor to make sure this is what you need.

Connects to the harness is for the Delphi Mini connector.

[Capacity of the injector]: 1/4 oz/7.5ml---2oz/60ml.

[Feature]: inject oil/dye on low side with AC on, works great.Makes oil injecting into the R-134 R410a R22 R12 system a breeze.

[Instructions]: You can view the second image to use the product.Oil cylinder is filled with 2 ounces of refrigeration oil, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Connect the low-pressure port of the refrigeration system that needs to be refueled, and add the required amount of cooling oil to the inner and outer cylinders.

(Specifics) This is a 8PCS Set USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

(Compatibility) Fits Newer Fuel Injectors applied by LS2, LS3, LS7 Engines. Please Make Sure the Connector is the Same to your Original One before Purchase.

(Interchangeable Part #) EC264, WPT-159, 57-5361, 1P1580, 960, 712, PS38764, 1U2Z14S411BPA, 17400-08.

Product Type:Auto Part

Item Package Weight:0.48 Kilograms

Item Package Dimension:5.4 cm L X22.0 cm W X28.2 cm H

Product type :AUTO PART

Package dimensions :7.874 cm L x8.382 cm W x2.794 cm H

country of origin :United States

【PREMIUM QUALITY】Fuel Injector Connector, made of high quality material for long lasting durability ,ensuring maximum performance and extended service life.Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping

【REPLACEMENT FUEL INJECTOR CONNECTOR】These are the cut and splice style, which is very easy to do, and better since you can choose the length of the plug and eliminate unnecessary electrical connections when using the plug and play style clips.

【REPLACES PART NUMBER】EV1-8

ELIMINATE GUESSWORK: The ABN | Fuel Injector Pulse Tester Noid Light Kit is a fuel injection tester that confirms injectors are receiving the signal to open and close (spray) when diagnosing performance issues; If your no-start vehicle has a rough idle, plug into injector connectors, idle air control EFI/ECU/PCM/PMU/AARP/NATO/NASA, and allow it to rule out any electrical issues; Not for diagnosing gummed or shorted injectors or confirming fuel movement but helps to rule out (or in ) problems

GET YOUR VEHICLE RUNNING SMOOTHLY: Fuel tester noid lights work with American domestic and European/Japanese imported vehicles with fuel injector systems; Includes 8 noids with different terminal pin configurations to match a wide variety of plugs (flat vs. rounded posts, wide vs. close apart, thin vs. thick); 3 noids compatible with GM, 1 compatible with Ford, 2 labeled Bosch, 1 GEO, and 1 MULTITEC-2

EASY TO USE: Disconnect fuel injectors, insert noid light, and watch the end of the extension when you turn over the engine (a flashing light indicates normal pulsing voltage); If the light flashes when the engine is on, the "engine control module" or "program control module" (not car computer) is giving the injector the current to open and close and therefore the injectors are receiving the signal to open and close solenoids to inject fuel; If not, injector may be gummed up and need cleaning

Replacement for: LB7 6.6L 2001-2004:Chevy Silverado Duramax 2500,GMC Sierra Duramax 2500,Chevy Kodiak,GMC Topkick Diesel.

REPLACES PART NUMBER: 97228929.

MATERIAL: Stainless steel,10.9 level high strength bolt

Aftermarket item, exactly same function as original

set of 8 USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

Fit many of the newer fuel injectors for the LS2, LS3, Ford, Dodge and many more.

[INFORMATION]This fuel injector connector is 2 wire, 5.5inch harness wire length

[PART NUMBER FITS] Repalces 5013995AA 5161919AA 88988313 89046636 89046836 89046838,S824,15306318 1U2Z14S411ANA 1U2Z14S411BPA 1P1344 PT2160.

[QUALITY CONTROL] This fuel injector connector installation set is 100% testing during the manufacturing process.

K102s fuel injector tester is a simple, powerful, which can test Gasoline injector, we offer besides the Automotive Fuel Injector Tester ,also have 2 injector adapters, so you can do a simply test and cleaning for your injector with just one bottle of carburetor cleaner. Very convenient

This Fuel Injector Tester Tool have two button and one knob ,knob is used to turn up or down the set value, one button is used for start or stop spray, one button is used for switch cursor.(Injector Tester Cleaner power by the 12V battery )

Fuel Injector Pulse Tester has a LCD screen,which display the injector working Mode ,working pulse width and working frequency,so you can simulate the various working states of the engine by set different frequency and pulse width, K102S has preset 4 working states: VL, VE,TL ,HL,They may not be suitable for all situations,You can set parameter according to your own needs.

Replacement Fuel Injector Control Module (FICM) Harness - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to the FICM module. This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes, idling or running rough your factory wiring may have a short or loose connection. Replace it and get you 6.0 Powerstroke running right.

Compatible Replacement for Ford Vehicles - 2003, 2004, 2005, 2006, 2007 F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07.

Replaces Part# - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A - While this is a not a genuine OEM part, it is a direct replacement for the factory FICM injector wiring harness found on your F250, F350, F450, F550, or Excursion. Powerstroke 6.0 diesel Super Duty.

CM-5010 (Set of 8) NEW OEM Motorcraft 7.3L Diesel Fuel Injector O-Ring Kits

*** 8 *** sets of CM-5010 / XC3Z-9229-AB

Each kit includes all the o-rings ( as pictured ): 3 O-rings, 1 Cushion ring, 1 Back-up ring and 1 Copper gasket

Please see the pictures with details above to make sure this is what you need.

Shipping from our USA warehouse, fast shipping and good service.

This DIY Injector Cleaner adaptor kit is easily to clean most car motorcycle fuel injectors.

Universal fit any 12 - 24V car, motorcycle, electric car, ATV, Boat and so oThe electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it.n. Widely used with electric equipment for power supply: GPS, mobile phone, tablet computer, camera, mp3, etc.

The electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it.

Main Usage: Works with cleaner, As an adapter for cleaning the fuel injector. Clean out carbon deposit in the nozzle. Dredge the blocked fuel injection nozzle;

Compatibility: It's a set of universal car tools. include two sets of adapters of different sizes, it can be used for almost all brands of cars and motorcycle fuel injectors. Not suitable for diesel engine;

Working principle: The electrical port of the Injector connect the 12V power by this terminal and cable. When the current is switched on, the solenoid valve in the Injector is opened. Meanwhile The cleaner is ejected through the white tube adapter by liquid pressure in CARB cleaner bottles, then through nozzle to dissolved carbon deposition;

Full 8pc set USCAR EV6 EV14 fuel injector connector pigtails. They are new and replacement for many of the newer fuel injectors using the LS2, LS3, Ford and many more.

Made with high quality plastic material. Designed to MEET or EXCEED standards of original factory Fuel Injector Connector Pigtail Wire. Guaranteed Exact Fit for PLUG & PLAY. Manufactured from quality materials, 100% tested before shipping.

Fit many of the newer fuel injectors compatible with LS2, LS3, Ford, and many more

Country Of Origin : China

The Package Height Of The Product Is 3.37 Inches

The Package Length Of The Product Is 2.0 Inches