Best Anpuds in 2026

【High Accuracy】This 3/8 inch torque wrench features precise dual scales of 5-45 ft.lb/6.8-61Nm. The torque wrench body is made of lightweight aluminum material, more accurate than ordinary chrome vanadium steel. It tests for accuracy to industry standards within ±3%.

【Lightweight and Durable】The bike torque wrench head is made of chrome-molybdenum alloy, the body and handle is made of 6061 aviation aluminum within compression resistance and oxidation resistance. The torque wrench weight is only 390g. It is lighter and higher hardness than chrome-vanadium steel. Easier to use it to tighten nuts and bolts.

【Easy to Use 】 Our torque wrench 3/8 drive is simple to use. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value. You will feel the vibrating handle or hear a ‘click’ from the wrench when the preset torque value is reached to remind you not to apply any more force.

【High Accuracy】This 1/4 inch torque wrench features precise dual scales of 20-240 in.lb/2.3-27.1 Nm. The torque wrench body is made of lightweight aluminum material, more accurate than ordinary chrome vanadium steel. It tests for accuracy to industry standards within ±3%.

【Lightweight and Durable】The bike torque wrench head is made of chrome-molybdenum alloy, the body and handle is made of 6061 aviation aluminum within compression resistance and oxidation resistance. The torque wrench weight is only 390g. It is lighter and higher hardness than chrome-vanadium steel. Easier to use it to tighten nuts and bolts.

【Easy to Use 】The inch pound torque wrench is simple to use. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value. You will feel the vibrating handle or hear a ‘click’ from the wrench when the preset torque value is reached to remind you not to apply any more force.

【High Accuracy】This torque wrench 1/2 drive features precise dual scales of 10-170 Ft-Lb/13.6-230.5 Nm. Each torque wrench is shipped pre-calibration tested for accuracy to ISO 6789, GB/T15729 and ASME B107.14M requirements. It tests for accuracy to industry standards within ±3%.

【Easy to Use】 Our torque wrench 1/2 drive is simple to use. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value. You will feel the vibrating handle or hear a ‘click’ from the wrench when the preset torque value is reached to remind you not to apply any more force.

【Dual-Direction with 72 Tooth】The torque wrench has a 72-tooth quick release reversible ratchet head, easily install and remove the socket, and firmly grasp the socket to prevent it from falling off. The paddle of the torque wrench head can adjust the direction of use at any time, it can be used both clockwise and counterclockwise directions.

【Lightweight Aluminum Material】The 1/4 torque wrench head is made of chrome-molybdenum alloy, the body and handle is made of 6061 aviation aluminum within compression resistance and oxidation resistance, the biggest feature is very light. The torque wrench weight is only 390g. It is lighter and higher hardness than normal chrome-vanadium steel. And the handle is non-slip.

【High Accuracy Within ±3%】This bike torque wrench features precise dual scales of 20-240 in.lb/2.3-27.1 Nm. Fully tested for accuracy according to the requirements of international standard ISO 6789, GB/15729 and ASME B107.14M within an accuracy of ±3%. Every torque wrench set includes a calibration certificate with traceable serial number.

【Safe and Easy to Use】Pull down the lock knob and hold it until the torque value setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value. You will feel the vibrating handle or hear a ‘click’ from the torque wrench when the pre-set torque value is reached, alerting you ‘stop’ applying force. Warm tips: At low in.lb settings under 40 the click can be ‘subtle’. Between 40-220 in.lb the click will be stronger.

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

Removable Power Tools Accessory Case

Quick Release, 72 Tooth Ratchet for high torque ratcheting

Durable anti-slip vinyl grip bit driver with maximum comfort.

HIGH DURABILITY: The impact socket set 1/2 drive metric and standard is made of high impact grade components of this master kit are constructed of drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners.

6 POINT DESIGN: The 6-Point hex 1/2 impact socket set design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output.

DUAL MARKINGS: The impact socket set 1/2 drive has a highly visible laser-etched markings on the black phosphate finish makes it easy to identify drive socket sizes and measurements to allow for fast application, efficiency, and accuracy in your automotive workspace.

Mechanics tool set includes 72 tooth count ratchets which allow for a 5 degree arc swing for maneuverability in restricted areas

Vinyl, anti-slip driver handle provides maximum comfort for the mechanics tools

Durable case with metal latches provides protection and storage for your DEWALT mechanic tool set

168PC 14/38/12DR SOCKET SET PTA

168PC 14/38/12DR SOCKET SET PTA

168PC 14/38/12DR SOCKET SET PTA

PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.

DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.

LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.

Precision Torque Measurement - Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range with micro adjustment to 0.1. Helps ensure that the fittings on your bike are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets.

Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise).

Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. Important: At low Nm settings under 5 Nm the click can be ‘subtle’. Between 5 & 20 Nm the click will be stronger.

measurement_system

Extremely robust and durable

Suitable for 1/4" hex bits under DIN 3126-C 6,3 and E 6,3, ISO 1173 and Wera series 1 and 4, Wera Adaptor 870/1 for 1/4" sockets

IMPACT EXTENSION SET: Each of the 1/4", 3/8”, and 1/2" impact extensions (3 total) are 15 inches in length and constructed of chrome vanadium steel material for high impact strength that withstands heavy-duty operation while providing a superior level of durability.

IMPACT SOCKET ADAPTER SET: Each of the 1/4", 3/8”, and 1/2" socket adapters are also impact grade chrome vanadium steel with a black oxide coat finish that maximizes the service life by protection against abrasion and corrosion.

LOCKING BALL DESIGN: Each extension and adapter have a spring loaded ball detent at the end of each drive head that locks the socket or extension bar into place for security and prevents dropping or slippage to create accuracy and precision when applying torque force.

Precision Torque Measurement - Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range with micro adjustment to 0.1. Helps ensure that the fittings on your bike are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets.

Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise).

Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. Important: At low Nm settings under 5 Nm the click can be ‘subtle’. Between 5 & 20 Nm the click will be stronger.

1/4, 3/8 to 1/2 IMPACT ADAPTER SET: This impact adapter reducer set has a specific impact grade design that is made exclusively for drivers, wrenches, and ratchets to convert size up or down for your automotive needs in the garage. Square drive converter.

CHROME VANADIUM STEEL: This socket adapter set is constructed of heavy duty drop forged and heat-treated chrome vanadium steel for superior strength and durability to exceed and endure in all work conditions.

BLACK OXIDE COATING: The super tough black oxide coating finish on these socket drill adapters gives you a long-lasting tool set that will stand the test of time and give you the most durable performance job after job.

MUST-HAVE HEAVY DUTY TOOLS FOR YOUR TOOLBOX – Our 3 x impact grade adapters are made from heat treated Chrome Vanadium steel and come in a convenient organizer/holder.

PERFECT FOR THE TOUGHEST JOBS – The Black Phosphate Coating Treatment will make sure that your rust-proof and corrosion-resistant drill to socket adapter will endure any abuse.

ONE SET OF IMPACT SOCKET ADAPTERS, UNLIMITED USES – The ¼” Hex Shank will fit all Quick Change systems and standard drill chucks, which is ideal for both professionals and DIYers.

ONE COMBO KIT FOR ALL YOUR NEEDS: 7-Piece set includes square drive adapters: 1/4"(F) to 3/8"(M) - 3/8"(F) to 1/4"(M) - 3/8"(F) to 1/2"(M) - 1/2"(F) to 3/8"(M) & 1/4" HEX to 3 square drive sizes: 1/4" Sq. 3/8" Sq. 1/2" Sq. Adapt & Convert your Impact Driver or Power Drill for any application.

HEAVY DUTY – Your Impact Grade Adapters are Hardened, Heat-treated & precisely machined to withstand the test of time. Engineered from Chromium stirred with Molybdenum and/or Vanadium.

GET A BIGGER BANG FOR YOUR BUCK: While other socket reducers are vulnerable to rust and corrosion, our adapters are treated with a rust-proof Manganese Phosphate coating to provide active protection.

EXTENSION BREAKER BAR: Our 1/2-inch extension breaker bar is the perfect leverage tool to provide you with ample torque power and reach. The 1/2-inch drive combines with a long 18-inch handlebar to create a bar tool that can do it all.

STRONG MATERIALS: With a drop-forged and heat-treated chrome vanadium construction, this socket extension bar is highly resistant to corrosion from grime, oil, or dirt. The mirror-and-chrome polished finish gives this non-ratchet bar a constant shine.

VERSATILE BREAKER BAR: Reach tight spaces at any angle with the 180-degree flexible head for optimal and flexible leverage. Loosen, break, and remove any bolt that is rusted, damaged, or stuck in industrial machinery or automotive vehicles.

Includes storage case and product manual with torque conversion chart

Wrench emits a click that can be heard and felt when the preset value is reached

High-contrast dual-range scale is easy to read, even in low light

Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V)

Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle

Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%

Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan

Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle

Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%

Durability: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Made in Taiwan.

Corrosion-Resistant: Chrome Plated & Mirror Polished.

Easy Storage: A sturdy plastic organizing case is included.

Off-corner loading design reduces fastener rounding

Chamfered opening quickly guides fasteners into socket

Hard stamped size markings

Heat treated CR-440 steel

DirectTorqueTechnology

High visibility laser etched markings

Heat treated CR-440 steel

DirectTorqueTechnology

High visibility laser etched markings

Package Dimensions: 16.256 cms (L) x 38.608 cms (W) x 16.256 cms (H)

Product Type: Wrench

Package Quantity: 1

Package Dimensions: 5.842 cms (L) x 13.462 cms (W) x 5.842 cms (H)

Product Type: Auto Accessory

Package Quantity: 1

Package Dimensions: 7.366 cms (L) x 25.908 cms (W) x 7.366 cms (H)

Product Type: Wrench

Package Quantity: 1

Set Includes 10mm (210M), 10mm (210MD), 11mm (211M), 11mm (211MD), 12mm (212M), 12mm (212MD), 13mm (213M), 13mm (213MD), 14mm (214M), 14mm (214MD), 15mm (215M), 15mm (215MD), 16mm (216M), 16mm (216MD), 17mm (217M), 17mm (217MD), 18mm (218M), 18mm (218MD), 19mm (219M), 19mm (219MD), 20mm (220M), 20mm (220MD), 21mm (221M), 21mm (221MD), 22mm (222M), 22mm (222MD), 23mm (223M), 23mm (223MD), 24mm (224M), 24mm (224MD), 26mm (226M), 26mm (226MD), 27mm (227M), 27mm (227MD), 30mm (230M), 30mm (230MD), 9mm (209M), 9mm (209MD), Impact (2300)