Best Arqq in 2026

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.).

1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.

High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.

Compatible: The 42-34 stepper motor is applicable to 3D printers (such as CR-10 series Z-axis or Ender-3 X / Y / Z-axis), CNC machines and equipments.

1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.

High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.

👉【Quality security】Creality 100% official, Original 42-40 stepper motor applies for E-Axis of CR 10 Max/ CR 10 Smart/ CR 10S Pro V2/ CR 30/ CR 6 Max/ CR 6 SE/ CR X/ CR X Pro/ Ender 3 Max/ Ender 3 Neo; X-Axis of CR 10 Max/ CR 10S Pro V2/ CR X/ CR X Pro; Y-Axis of CR 10 Smart/ CR 10 V2/ CR 10 V3/ CR 6 SE/ Ender 3 Max/ Ender 3 Max Neo. The connecting cable is not included!

❤【High-quality Stepper Motor】3D Printer motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 1.8-degree step angle, 0.4N.M holding torque, with 1A rated current per phase. This means that you can save on the cost of replacing or repairing the engine.

🆗【Low Noise Stepper Motor】The high-quality motor with low power, uniform speed, stable performance, high accuracy, low noise, and no step to lose during the operation, which ensures the extrusion mechanism stable operation. This greatly reduces the vibration and noise when the motor is working, keeps you focused, and provides a quiet printing experience for colleagues and family.

5pcs/ Package

59Ncm(83.6oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.85" 4-wire

【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.

【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.

【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 5 Pro,Ender 5 Plus,CR10 Serie,Voxelab Aquila 3D printer.

5 PCS, High torque Low noise

Nema 17 stepper motor with step angle 1.8deg

Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC

Motor Model: 42-34 Nema 17, widely work for Most 3D Printers (like CR-10 Series Z-axis or Ender-3 X/Y/Z-axis), machinery and equipment.

High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.

Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.

2mm pitch, 4 starts, 8mm lead

High torque nema 17 stepper motor, 400mN.m/57.1 oz.in, 42mm, 2 phase 4 wires

Come with a brass nut and 1M (39.37") motor wire

45Ncm(63.7oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.57" 4-wire

1.8 deg. step angle(200 steps/rev)

High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.

Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.

★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.

★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.

High Torque: Usongshine stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g

Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.

Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.

5 Pack, Nema 17 Stepper Motor with 42Ncm holding troque

Bipolar stepper motor ,dimension 42*42*38mm, 2 phase, 4 leads

Step angle 1.8deg, 200 step/revolution

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Dimensions: 42x42x23mm/1.65""x1.65""x0.9"" ,1.8 deg. step angle(200 steps/rev),Rated current 1.0 A & resistance 3.5ohms.

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Double Z structure runs smoothly.

Simple assemble, no need other tools.

Cost effective upgrade kit and high performance.

Nema 17 stepper motor with 0.42Nm holding torque

Bipolar stepper motor 42*42*38mm, 2 phase

With built-in 30cm cable, 4-wire

Nema 23 cnc stepper motor, up to 425oz-in or 3Nm holding torque

Rated current 4.2A & resistance 0.9ohms. Step angle: 1.8°(200 steps/rev)

4-wire, 11.81" cable. Connection: Black(A+), Green(A-), Red(B+), Blue(B-)

5 pack, Nema 17 Stepper Motor with 55Ncm holding troque

Bipolar stepper motor ,dimension 42*42*48mm, 2 phase, 4 leads

Step angle 1.8deg, 200 step/revolution

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

NEMA 17 stepper motor, 2 phase, up to 62.31oz-in(44Ncm) holding torque, high torque, low noise, low step loss and low cost

Rated current: 1.7A. Step angle: 1.8°(200 steps/rev). Frame size: 1.65"(42 mm), square body. Full D-cut shaft length: 0.87", shaft diameter: Φ0.2"

39.37"(1m) 4-pin cable and 2.54mm(0.1") connector. Using M3 screws, easy to install. Connection: Red(A+), Blue(A-), Black(B+), Green(B-) Tips: Not only swap your old motor out but aslo the wire

Package in 3PCS

65Ncm(92oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x2.36" 4-wire

Good Torque Good Speed

0.35 deg. Step Angle

NEMA 17 bipolar 4-wire

FEATURES: 2 phase, 1.8 degree step angle, 0.68Nm(100.6oz-in) holding torque, 1.8-2.0A rated current, 4-wire (30cm)

SPECIFICATION: Phase resistance 2.0ohms, size 42*42*60mm, shaft diameter 5mm, shaft length 24mm

ADVANTAGE: The stepping motor is featuring low vibration, low noise, low heating, high speed

Middle Size with Hight Torque

18Ncm(25.5oz.in) holding torque

NEMA 14 bipolar 1.38"x1.38"x1.34" 4-wir