Best Ato in 2026

ATO 3 hp 2.2 kW 120V VFD, single phase 110V/120V input, single phase or three phase 220V output variable frequency drive, specially designed for 120V power supply

【VOLTAGE&FREQUENCY】Input voltage : 1 phase 120V AC ±15%; Input frequency: 50Hz/60Hz; Output voltage: 1 phase or 3 phase 220V AC ±15%; Output frequency: 0.00~400.00Hz

【APPLICATION】 ATO 110V Input 220V Output VFD, can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.

【Electric Cement Mixer】ATO 1800W handheld mortar concrete mixer drill can be used for cement, paint, mortar, concrete, putty powder, gypsum, etc

【Dual-Paddle Design】Equipped with a powerful 1800W motor and a screw shaped dual-paddle. High-torque, high-efficiency heavy-duty gear system, continuous working time≥300 hours, long service life. Swing amplitude of the stirring rod is ≤0.5m

【Speed Mechanical Control】2 level rotation speeds, the high gear runs at 0-820rmp/min, while the low gear runs at 0-620rmp/min. High and low gears features 6 speeds for tackling wide variety of materials

【Input】ATO 220V 1 Phase to 3 Phase VFD, Input voltage : 1 phase 220~240V AC ±15%,Input frequency : 50Hz/ 60Hz

【Output】Output voltage : 3 phase AC 0~input voltage, Output frequency: 0.00~400.00Hz

【Interior PID controller】ATO single to 3 phase VFD be convenient to make closed-loop system, automatic energy save running optimize V/F curve automatically based on the load to realize power save running

Size: About 150 * 0.5 * 0.2cm/59 * 0.2 * 0.09inch(L*W*H);

Made of high quality material, it is durable and long lasting use.

It is compatible with many stepper models.

Small Size, Short Height

16Ncm(22.6oz.in) holding torque

NEMA 17 bipolar 1.65x1.65x0.79 4-wire

The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable.

Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in); Stepper Motor diameter: 1.06(in); Stepper Motor lines: 9.45(in).

A, B, C, D four-phase LED indicates the status of the stepper motor work.

Auto Guide Terminal: RJ-12 6pin (ST-4 Type)

Power supply (recommended): 4 x AA alkaline batteries (sold separately)

Size and Weight: 6.8 x 4.5 x 3.8 inches (173.5 x 113.3 x 96 mm), Approx. 2.2 lbs (1

Auto Guide Terminal: RJ-12 6pin (ST-4 Type)

Power supply (recommended): 4 x AA alkaline batteries (sold separately)

Size and Weight: 6.8 x 4.5 x 3.8 inches (173.5 x 113.3 x 96 mm), Approx. 2.2 lbs (1

Auto Guide Terminal: RJ-12 6pin (ST-4 Type)

Power supply (recommended): 4 x AA alkaline batteries (sold separately)

Size and Weight: 6.8 x 4.5 x 3.8 inches (173.5 x 113.3 x 96 mm), Approx. 2.2 lbs (1

【BASIC PARAMETERS】This single phase vfd drive: 1 phase input and 3 phase output;Input voltage: 220V(+/-15%),Output voltage: 220V; Input frequency: 50/60 Hz,Output frequency: 0-400 Hz; The power is 2.2KW 3HP 12A, AC 220V; VFD Dimension: 4.61 x 4.96 x 6.89 inches (L x W x H).NOTE:Some products do not have the "XCFDP" brand logo on the product due to the production batch, and there is no difference in other parameters, please don't mind this.

【EXCELLENT PERFORMANCE】With the copper coil of good quality,this Vfd drive is safer and more durable.And this vfd adopts the multi-grid design with enough cooling space between the electronic components and the case, so it is easier to cool quickly.

【MULTI-PROTECTION AND EASY TO OPERATE】this vfd drive is screwed tightly and equipped with multiple protection functions for stable and safe operation,such as Three Anti-Paint Protection Lines,Over Current Protection,Over Voltage Protection,Overload Protection,Short Circuit Protection.And the simple removable control panel and the easy connection make this vfd easier to use.(!!NOTE:Comes with 20cm control panel cable inside the vfd, extra extension cables are not included.)

Stepper motor with a standard interface.

A, B, C, D four-phase LED indicates the status of the stepper motor work.

Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)

For telescopes equipped with CG-4 equatorial mount. C102HD-C4-R-CN 6

Designed for Celestron's CG-4 mount

Excellent for tracking in RA

7.5KW 10HP 32A VFD Input voltage: 220VAC(+/-15%); Output voltage: 220VAC(+/-15%); Input frequency: 50/60 Hz; Output frequency: 0-400 Hz;Output Current:32A, Input phase: 1 phase; Output phase: 3 phase.

This new series has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency; support fast accelerate/deccelerate with external optional braking resistor and external potentiometer.

Rich of digital and analogy control terminals for versitile control , optional MODBUS (RS485) extension, well controlled fans produce low acoustics noise.

Precision mini-motor attaches to your Orion EQ-1 equatorial mount to allow motorized tracking of celestial objects

Motor drive provides regulated sidereal-rate tracking in right ascension

Hand controller has 2x and 8x speeds and pause mode

Support Voltage 3V to 6V DC, 3V is recommended

10pcs DC 3V -6V 130 Motor 15000 RPM For DIY

Diy Experimental equipment, small motor Produce Small fan

Send from China - Black, Updated Cloudray label , Send from USA FBA - Silver, Smartrayc label Cloudray and Smartrayc driver are the same one, only different label and color.

Extra-low motor noise offers excellent quietness;Industrial-grade Stepper Driver.

Suit for 2-Phase Nema 17, 23 and 34 Stepper Motor.

HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board

Dual motor driver chip L9110S

Module supply voltage :2.5-12V

►Performance：28BYJ-48 ULN2003 5V Small Stepper Motor.A/B/C/D four-phase LED indicates the status of the stepper motor work.

►Running：Stepper motor with a standard interface, when used directly pluggable.The motor is gear-reduced, the noise is extremely low

►parameter：1.37*1.18*0.6 inch; Stepper Motor diameter: 1.06inch ; Stepper Motor lines: 9.45inch.

★【Excellent Quality】Stepper motor can converts pulse signals into angular displacement or linear displacement. It is the main executive element in modern digital program control systems

★【Powerful Function】A/B/C/D light diodes indicate the working state of the four-phase stepper motor. Equipped with a standard interface of the stepper motor,can directly plugged in and out

★【Easy to Use】The ULN2003 module is often used to drive a small five-wire four-phase motor, and the LED is the working status indicator of the stepping motor.

Micro Vibration Motor: Rated Voltage: DC 3V; Rated Current: 85mA

Small Size: 10 x 2mm (D x T) ; Speed: 12000RPM

High Quality:Mini Vibration Motor table Performance, Strong Power, Long Service Time

NEMA 11 Hybrid bipolar stepper motor, 12Ncm(17oz-in) holding torque

Frame Size 28 x 28mm, Body Length 51mm

4-wires (Black, Green, Blue, Red)

Size: 10mm x 3mm/ 0.39" x 0.12" (D*T) Cable length: 50mm/1.97 inch

Voltage: 1.5-3v Power: 0.01-0.06W

Speed: 8000-16000 Torque: 0.3g.cm-3g.cm (NM)

Micro Vibration Motor: Rated Voltage: DC 3V; Rated Current: 85mA

Small Size: 10 x 3mm (D x T) ; Speed: 12000RPM

High Quality:Mini Vibration Motor table Performance, Strong Power, Long Service Time

Size: 10mm x 3mm/ 0.39" x 0.12" (D*T) Cable length: 50mm/1.97 inch

Voltage: 1.5-3v Power: 0.01-0.06W

Speed: 8000-16000 Torque: 0.3g.cm-3g.cm (NM)

Working voltage: 3VDC,No-load current: 15mA, No-load speed: 160RPM

Operating voltage: 4.5VDC, No-load current: 18MA, No-load speed: 270RPM

Operating voltage: 6VDC, No-load current: 28MA, No-load speed: 360RPM

Dual-channel L298N H-bridge driver can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors

Accepts standard TTL logic level inputs to drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V

Uses large-capacity filter capacitors and diodes with freewheeling protection function to increase reliability