Best Atomstack in 2026

【20W laser power, high power, fast engraving speed, good effect】The power of the engraving machine does not affect the engraving, only the laser power affects the engraving effect. 20W laser power, the latest exclusive technology, based on the compression shaping spot technology, four 6W laser diodes cooperate with optical mirrors to increase the laser power to 20W, and the spot can be compressed to 0.08mm*0.1mm size.

【Strong cutting capability/more powerful engraving capability】Able to cut metal, like a wild beast. 12-15mm thickness solid wood board cutting off with only one pass. 256 different grayscale makes the engraving more than black only According to the different grayscale information from the picture, the laser energy is automatically adjusted to achieve the finer contrast of the finished project as well as more natural transition between colors.

【Can be engraved offline, Equipped with an air assist pump】dependent operation terminal control, improve production efficiency. Equipped with an air assist pump 20W engraver is equipped with 10-30L/Min air assist pump kit, which could improve the cutting and engraving speed with the cleaner surface, as well as extending the service life.

Double Protection Desktop: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine.

Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming.

Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature.

More Powerful Engraving: ATOMSTACK S20 PRO is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board.

More Precise Engraving: ATOMSTACK laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area MAKEs the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more deliCATe and natural in the overlay of black and white.

More IntelLIGEnt Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer.

【5W Laser Power Compression Laser】Adopting 4-fold lens group collimation focusing technology, ATOMSTACK A5 M50 Pro laser engraver has 5W optical power and ultra-thin 0.08*0.08mm laser focus to achieve both fine engraving and cutting, can engrave wood, stainless steel, metal, ceramics into custom decorations and gifts. The laser power of fixed-focus laser is more stable than that of zoom laser.

【Terminal Panel for Offline Engraving】Our A5 M50 Pro laser cutter configures the terminal control panel and supports offline engraving. The panel adopts ergonomic housing design for confortable operation and magnet adsorption connection design to better attach to the control box. With the touch panel and the 32-bit motherboard, you can carry out engraving work anytime and anywhere without being restricted by the computer.

【Eye-protection and Safety Designs】The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. It allows a group of DIY lovers watching it engraving without goggles, reduces the cost of buying goggles and the inconvenience of wearing goggles. The laser engraving machine is also equipped with emergency stop button and stopper for your safety.

▶【Upgrades in Configurations】- ATOMSTACK S20 Pro laser engraver is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output optical power soars to 20W. Also it is equipped with 32-bit motherboard, built-in 256-bit color scale and offline control terminal board.

▶【Engraving in Vibrant Colors】- ATOMSTACK laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white.

▶【Cutting on Thicker Materials 】- ATOMSTACK laser cutter with the most advanced 20W compressed spot makes cutting more powerful and faster. It can cut 15-20mm thick tung wood board and 8-10mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board.

【Industrail-grade Fiber Laser Marking】Adopts industrial galvanometer technology, the marking speed of ATOMSTACK M4 fiber laser engraver is greatly improves to 12000mm/s, 5 times faster than blue light marking machines. With upgraded compressed spot technology, the minimum markable character is about 0.06mm*0.15mm (tested with focusing film). The 0.01-0.02mm ultra-long and ultra-fine infrared laser can perfectly present 4K-level high pixels.

【Desktop and Handheld 2 in 1】Not only supports desktop laser marking, ATOMSTACK M4 laser marking machine also supports handheld laser marking. Equipped with a handle and built-in TF card, the 2.8kg engraving head can be easily held to mark on non-horizontal surfaces, walls and facades, getting rid of the shackles of computer and desktop. The 1064nm wavelength cold red light laser is safer than other 450 blue light laser and will not burn human body.

【Easy to Use and Smart Design】ATOMSTACK M4 laser engraving and marking machine has a full-metal sturdy structure. In 70x70mm engraving area, it adopts double red light positioning to accurately locate the marking position without offset. The one-key marking function can repeat the work with one click and easily complete batch customization work without computer operation. The reserved window at the bottom makes it support up to 96mm height item engraving.

【REAL 10W OPTICAL POWER】With the world's first dual laser coupling technology, the A10 Pro laser engraver for wood and metal achieves true 10W optical power, narrowing the laser focus area to 0.06*0.08mm. With it's high density laser, it can cut 0.8" wood and 0.6" acrylic panels. It is also equipped with an easy-to-operate 3.5inch touch screen that supports offline engraving, which makes it very portable.

【MAKE YOUR ENGRAVING MORE DELICATE】Having a 32-bit core control motherboard, the A10 Pro lazer engravier, machine has more processing ability and faster engraving speed (10,000mm/min) than the competition. It is also integrated with a 256 color gradation module, which makes your engraving clearer and more three-dimensional providing a finished effect that is greatly improved over the xtool·D1.

【POWERFUL UTILITY & WIDE COMPATIBILITY】The A10 Pro laser cutter and engraver machine is compatible with Windows, MacOS and Linux systems. It is also supported by mobile Apps. You can transfer data via Wi-Fi, USB cable, TF card. With just a single PC and a USB cable you can control multiple engraving machines at the same time and engrave continuously 24x7 allowing your business to increase its production.

▶【Necessary Assist Kits for Engraving】- The R3 Pro rotary roller kit is for auxiliary engraving and it needs to work with the engraving machine. It can be used to engrave cylindrical/round/cup-shaped/oversized objects such as skateboards, goblets, stainless steel mugs, guitars, porcelain mugs, pens, baseball bats, cans, glass bottles, etc. In a word, during the working process, it plays a very good role in supporting, elevating, rotating and fixing the engraved object.

▶【Upgrades Version of R3 Rotary Rollers】- The R3 Pro rotary roller has added many new accessories on the basis of R3. They are: 1 x Rotary Roller (for fixing and rotating objects); 4 x Foot Columns (for fixing and raising the engraving machine); 2 x Supporting Shafts (for supporting and securing oversized objects); 1 x Support Frame (for stabilizing and securing the cup feet to prevent tipping). In short, the R3 Pro series has more complete accessories.

▶【8-gear Adjustable Width and Diameter】- The width of rotating roller can be adjustable. The diameter of the Y-axis drum engraving module can be adjusted in 8 levels. The engraving diameter is as small as 4mm and as large as 100mm, so it is so flexible and convenient for you to engrave objects, and you can adjust the width accroding to your needs.

1064nm Infrared Wavelength and High Performance sensor: Atomstack M4 with 1064nm infrared fiber laser,the engraving speed is up to 12,000mm/s, industrial grade optical sensor, K9 dual optical lens, accurate focusing, low light loss, precise and fast laser focusing . Three-lens dot compression with dot size as small as 0.001mm is a real game changer for portable laser engraving machines.

Fine Engraving & Precise Positioning: 0.01-0.02mm ultra-long and ultra-fine end-pumped infrared laser can display every detail of engraving and present pixels with 4K level perfectly. Atomstack M4 laser engraving machine adopts dual infrared light positioning design, which can accurately locate the marking position without offset and good position.

Preview Frame and Height Item Engraving: 70 * 70 mm engraving area; double red light positioning, projection of preview frame, precise and clear positioning of marking position. Reserved window at the bottom, support for super high article engraving, M4 normally supports article engraving with height up to 96mm, with the bottom window and elevation equipment, it can break the height limit.

Innovative Laser technology: Atomstack A10 pro Laser Engraver adopts the double compressed spot coupling technology, which combines two 5W laser sources into a single 10W ultra-powerful light source with a reduced focal area of 0.08*0.06mm, makes the laser power larger and more stable and easily cut 20mm thick wood panels as well as 15mm thick black acrylic.

Advanced high-performance fixed-focus laser: No need to adjust the focus before engraving; The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers. The Double-compressed spot technology makes the laser spot down to 0.06mm to achieve finer image engraving.

Wide Software Compatibility: Atomstack A10 pro is compatible with operating software such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

Tight spots, nooks, and corners - They're all easily within reach when you add the 225 flex-shaft attachment to your Dremel rotary tool

Flexible 36-inch shaft attaches easily; Enabling craftsman, jewelers, woodworkers and DIYers the extended control and flexibility to drill, cut, carve, and polish even the most delicate of projects

Compatible with Dremel rotary tool models 4300, 4200, 4000, 3000, 200, 100

Tight spots, nooks, and corners - They're all easily within reach when you add the 225 flex-shaft attachment to your Dremel rotary tool

Flexible 36-inch shaft attaches easily; Enabling craftsman, jewelers, woodworkers and DIYers the extended control and flexibility to drill, cut, carve, and polish even the most delicate of projects

Compatible with Dremel rotary tool models 4300, 4200, 4000, 3000, 200, 100

PERFECT FOR MAKERS – NestOne engraving tip and housing are perfect for Cricut Maker machines. This tool set is not for Explorers.

THE WHOLE SET – It includes an engraving tip and a Quick Swap housing.

SMOOTH and ACCURATE – It is made from premium carbide steel and is competent for professional-looking results of different occasions, from dog tags, nameplates, inscribed art and decor, jewelry to monograms, wood carvings, and keepsakes.

Turn your Dremel rotary tool into a versatile carving machine with the 11-piece carving & engraving micro accessory kit.

Kit includes a reusable storage case and a variety of accessories to allow you to carve, etch and engrave in a variety of materials including steel, wood, plastic, glass, stone, ceramic, and more.

Carving/Engraving Accessories: 105 1/32" Engraving Bit (x1), 106 1/16" Engraving Bit (x1), 107 3/32" Engraving Bit (x1), 108 - 1/32" Engraving Bit (x1), 7103 5/64" Diamond Wheel Point (x1), 7134 5/64" Diamond Wheel Point (x1)

Gifts for Mom from Daughter or Son - This mom gift features a meaningful quote engraved on the premium quality glass, and it will make her feel loved, respected and happy. This is a perfect gift for a mom who has everything

Reliable Quality & Craft - This keepsake was made of high quality glass and the pattern was engraved inside it by laser. The glass is transparent and has no impurities, the pattern is clear and doesn't damage the surface, and it can be used for many years

Meaningful Gifts for Mother - The special quote will tell your mom how much you love her. It is suitable for any special day or festival, like birthday, Mother's Day, Thanksgiving, Christmas, New Year and so on

Material: Hight class CVD Znse material (US II-VI)

Diameter: 18mm/0.71"; Focal Length:50.8mm/2";Thickness:2.2-2.3mm;Transmittance: ≥99.5%

Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.

Protect Materials: Honeycomb plate and aluminum panels provide double protection. Honeycomb design facilitates smoke evacuation and protects the material from hot fumes, and you get a cleaner works

Fast Heat Dissipation: xTool honeycomb working table is made of iron and aluminum, with uniform honeycomb holes design accelerates the smoke, solving the problem of wood and other materials blackening due to smoke

Comprehensive Protection: The honeycomb working table comes with an aluminum panel that can protect your desk from laser damage. We also provide four corner protectors to prevent your hands from being in any potential danger

Material: Hight class CVD Znse material (US II-VI)

Diameter: 15mm/0.59"; Focal Length:50.8mm/2";Thickness:2.2-2.3mm;Transmittance: ≥99.5%

Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.

Armour Etching Cream for Glass 2.8oz Net Weight - Armour Etch is a fast acting specially formulated glass etching compound that lets you create permanent etched designs on windows, mirrors, and household glasswares. Please note product is sold by weight not volume and bottles are intentionally not fully filled by the manufacturer.

Unique Glass Etching System - This unique glass etching system allows anyone to personalize and decorate glass or mirrors in minutes with no previous experience. Try it, you will love it.

Not Intended for Children - Not intended for use by children. Will NOT etch Pyrex, acrylic or plastics. NOT recommended for etching large solid areas of glass.

Armour Etching Cream for Glass 10oz Net Weight - Please note product is filled by weight not volume. Armour Etch is a fast acting specially formulated glass etching compound that lets you create permanent etched designs on windows, mirrors, and household glasswares.

Unique Glass Etching System - This unique glass etching system allows anyone to personalize and decorate glass or mirrors in minutes with no previous experience. Try it, you will love it.

Not Intended for Children - Not intended for use by children. Will NOT etch Pyrex, acrylic or plastics. NOT recommended for etching large solid areas of glass.

VERSATILE TOOL FOR CRAFT PROJECTS: Perfect for glass etching, leather burnishing, jewelry making, polishing, woodworking and more

WOOD CARVING DETAIL: Use your creativity to create amazing woodcarving projects. Perfect for general & detailed woodworking crafts. Allows woodworkers to reach tight areas for detailing the woodcarving project without damaging the wood. For higher precision and detailed techniques, use the 105 Engraving Bit included in kit.

SLIM SIZE: Slim size allows you to get closer to your workpiece and provides maximum control in precision etching, engraving, polishing and sanding applications

Material: Hight quality PVD Znse crystal material

Diameter:18mm/0.71";Focal Length:50.8mm/2";Thickness:2.2-2.3mm;Transmittance: ≥99.5%

Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.

Material: Hight quality PVD Znse crystal material

Diameter:18mm/0.71";Focal Length:76.2mm/3";Thickness:2.2-2.3mm;Transmittance: ≥99.5%

Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.

Material: Gold-Plated Silicon

Diameter: 20mm/0.79"; Thickness: 3mm/0.12"; Shape: Plane;Transmittance: >99.2%

Made by multiple processes;Superb coating art,Precision slicing polishing and grinding processes,Excellent optical properties,High working efficiency,Long working life.

Material: Hight quality PVD Znse crystal material

Diameter:18mm/0.71";Focal Length:63.5mm/2.5";Thickness:2.2-2.3mm;Transmittance: ≥99.5%

Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.

Dremel Engraver is ideal for personalizing your valuables as well as decorative designs

Engraves wood, leather, tools, machinery, hard steel, stone, glass, ceramics, porcelain, plastics and more

Stroke adjustment dial regulates engraving depth from fine lines to deep grooves

Perfect tool for engraving in plastic, metal, glass, ceramic, leather, wood, and more

Depth-adjustment dial helps control the length of the engraver’s stroke

13-watt motor provides up to 7,200 strokes per minute

Flakes: 5/8 x 5/8-Inch

PEACE: 1.0 x .5 Thanks 2.25 x 1.0-Inch

Individual reindeer1.0 x 1.0-Inch use them to add to the Santa/sleigh

WORKS IN ALL SILHOUETTE MACHINES BEFORE CAMEO 4: For Cameo 4 Tool search "Zoom Precision Cameo 4"

3 TIPS IN 1: Highest quality precision, regular, and blunt tips included

METAL STAMPING BLANKS INCLUDED: Includes 10 quality metal stamping blanks: circle tags: 1" diameter with hole; hearts 3/4" x 3/4" with right hole; dog tags 1" x 2" with hole

Diameter: 18mm/0.71"; Focal Length: 38.1mm/1.5"; Thickness: 2.2mm/0.09"; Weight: 0.1KG

Shape: Plano-Convex; Transmittance: ≥99.5%

Material: PVD Znse; Compatible power: 30W-100W